We’re not saying anything new by talking about how awesome our kids can be. No parent would doubt for even a minute that theirs is one of the biggest parts of their lives. They also wouldn’t doubt that kids are inquisitive, often to a fault. And with a home full of electronics, outlets, and appliances, it can be hard to feel like your kids are as safe as you want them to be.

Looking for the best ways to babyproof for your child or newcomer? The experts at Hoffman Electrical are here to help! Safety is our absolute top priority, and we want to ensure our clients get all of the best info possible to keep their Tampa home and family safe.

Of all of the dangers of electricity involving kids, outlets are probably the scariest, and for good reason. They’re right down there at a kid’s eye level, and they see us using them all of the time, so of course they’re going to be curious.

Access Lighting is a family owned and operated business committed to providing an extensive inventory of affordable lighting with an outstanding selection of bath vanity lights, kitchen fixtures, foyer and hallway lights, reading lamps, pendants and decorative wall sconces.

Experience the magic of modern design, a fusion of classic shapes, eternal materials and elegant finish options.

Visit a Capitol Lighting showroom or shop online at 1800lighting.com to view the latest innovations and enjoy promotional values on spectacular lighting and home accents from Access.

TOP PICS INCLUDE:

“Viper” indoor spot light

“Prizm” semi flush fixture

“Comet” indoor spot light

“Iron” bath vanity light

“Chimes” LED ceiling fixture

“Argon” ceiling pendant

“Safari” ceiling pendant

Furnish your entire home with the finest illumination from Access Lighting.  From ceiling fixtures and wall lighting, energy-efficient outdoor lighting to outstanding pendants with Italian Art Glass, the latest styles from Access are available at Capitol Lighting.  Transform your home with eco-friendly lighting designs and take advantage of Earth Month savings  and the guaranteed lowest prices at 1800lighting.com!

If you’re dying to install your new instructions for how to install a light bar. These instructions include options for installations with or without a wire harness and for connecting to existing LED lights. Installation will vary based on the type of vehicle, existing lighting setup, and chosen wiring method, but these instructions can serve to give you a general idea of the process. Light bar mounting instructions are also available and are listed by WH-DTS10, WWH-DTD30; (ATP) WH-ATPD20, sdoptional mounting brackets; be sure not to overtighten the hardware (you will need to adjust it in step 7).

3. Route the lighting side of the wiring harness from the battery to the light in a safe, secure manner. Connect the harness to the light. Be sure to avoid heat sources and any moving parts while running your wires. Prolonged chafing of the wires may lead to a short in the circuit. Typically, following the vehicle manufacturer’s wiring harness is a safe path to follow. Some lights may not have DT or ATP connections on them, but the connectors can be added from the harness kit or purchased separately (ATP-FPT).

4. Continue to route the switch portion of the harness to the desired location of the switch. The switch may need to be unplugged from the harness to make routing of the harness easier. An optional remote-controlled switch (RS-x) are also available with different legends.

5. Connect the black (ground) wire with the large ring terminal from the harness to the negative battery terminal. Connect the red (power) wire with the large ring terminal from the harness to the positive battery terminal.

6. Secure the relay to a suitable location, and test the light to make sure the circuit works.

7. Finally, aim the light in the desired direction, and tighten all mounting hardware.

3. Connect the black ground wire of the new light to the ground wire of the old light with solder and heat shrink tubing (PSC-x). Connect the red power wire of the new light to the power wire of the old light.

4. If the new LED work light or off-road light bar has an ATP or DT connector that you wish to utilize, corresponding ATP (DT-MPT) pigtails are available.

5. Finally, aim the lights in the proper direction, and tighten all mounting hardware.

1. Find a suitable mounting location that will allow for running wires and mounting the LED light bar. Mark where your holes will be for the light bar brackets or mounting feet. Check behind drilling locations to ensure nothing will be damaged. Drill appropriate-sized holes.

2. Mount the lights with the provided hardware or with DT-MPT or RRS-SP, RRS-SPx, or RCS-RF25A) under your hood to speed up install time and avoid routing wires through your vehicle’s firewall. Route another run of red wire from the pigtail adapter (connected to the light) to the output terminal of the switch. Be sure to avoid heat sources and any moving parts while running your wires. Prolonged chafing of the wires may lead to a short in the circuit. Typically, following the vehicle manufacturer’s wire harness is a safe path to follow.

4. Be sure to double-check for all obstructions and proper clearance. Drill an appropriate sized hole for the switch, and mount it.

5. Connect your black wire to the negative battery terminal. Connect your red wire to the switch input terminal and to the positive battery terminal with an appropriate-sized fuse holder (MAF-x) installed within 18 inches of the battery. You will have to cut your section of red wire to allow for the fuse holder to be installed between the switch and battery. Connect your other run of red wire to the switch output terminal.

6. Finally, aim the lights in the proper direction and tighten all mounting hardware.

Whole-house generators are permanent installations on one’s property. They must be properly sized for the electrical demands of that property, and they are hardwired right into the home’s electrical system. For many homeowners, especially those in urban and suburban areas, this level of protection is a bit of overkill. The portable generator is a versatile piece of equipment that you can use in many different settings in order to power an admittedly more limited array of electronics.

A portable generator is not going to keep your entire house up and running, nor will it be able to support large HVAC systems. You must plug your gadgets and electronics directly into the generator in order to use it. If you are just looking to keep a few items up and running during a power outage—allowing you to run the refrigerator to protect your food supply, charge your phones, even watch a DVD—then a portable generator is a great option to consider. Not only that, but they are extremely handy for camping trips, and even tailgating on game day. They can also be used to power medical equipment in a pinch. We ourselves have serviced a portable generator on a medical service mobile unit truck. Give us a call if a portable generator sounds like a good fit for your needs.