Summer is right around the corner, which, for us here in Maryland, Virginia and Washington, D.C., generally means extreme humidity, unpredictable weather patterns and, in recent years, rolling blackouts. Although we have all undoubtedly been looking forward to warmer days after this volatile past winter, summertime is not without its headaches.

It was just last summer that a massive blackout left millions along the Atlantic Coast without power after devastating thunderstorms downed tree limbs and power lines across the region on June 30. Shortly after the power outage, the state of Maryland ordered a heat advisory, warning elderly and infirmed individuals to stay indoors. However, because of the blackout, millions were left without the air conditioning they relied upon to make temperatures indoors more tolerable. As a result, area hospitals that were already crowded following the storms were flooded with even more patients suffering from heat exhaustion and dehydration.

When it comes to electrical tasks in yousitur home, it’s never a good idea to turn them into a DIY project. Electricity is a very necessary and useful utility, but can be extremely dangerous too and it’s crucial that you call in a certified, skilled and insured electrician to handle the job for you. Look for a professional and reputed company that provides 24/7 services and keep their number easily accessible at all times; this will ensure you get prompt services exactly when you need them. Here we discuss in which situations you should call in an emergency electrician to tackle the job for you:

This is extremely dangerous and you should immediately turn-off the circuit breaker that you feel is connected to that wire. Do not try to repair this yourself as there could be a chance that the circuit breaker you turned off isn’t connected to that particular room wire at all and this exposes you to the risk of electrocution.

This is a situation you shouldn’t take lightly at all. It’s important that you keep all your family members and pets away from that room and switch off the circuit breaker you think is connected to that wiring line. If you have any water pooling, puddling or accumulated (as in a flood situation), call in a skilled electrician to check all the wiring and address the problem without delay, as this is a major electrocution risk.

It’s not often that a home will lose power completely, while there is no similar problem in the neighbourhood. However, if the power does go out only in your home, quickly check with your neighbours and check whether the street lights have also lost power. If everything seems to be alright there, you may have a major electrical problem on your hands.

In all these situations, do not try to find out what the problem is; call in a licensed, local electrician to inspect the wiring and other electrical fittings and fix the problem. The point we are trying to make here is that if you in any way feel that an electrical installation or appliance is unsafe, call in an electrician without delay.

The one way to reduce the chances of an electrical problem from occurring is to get regular electrical maintenance done. The company you hire for the job will send out skilled professionals at pre-decided schedules to conduct a thorough check on the wiring. In case any potential problems are noticed, you will be informed about them and they will be addressed without delay. This reduces the chances of major electrical problems surfacing out of the blue.

We at Allround Electricals will check the system carefully and check it for any other potential faults as well. For more information, contact our friendly team at this number – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

Any business knows that productivity is key to growth, let alone staying afloat. Whether you are talking about a production line, a traveling salesperson, and yes even your office space; productivity is going to be the main driving factor which will allow your business to not only stay in business, but also experience growth year over year, month over month.

Here we are going to describe 23 ways to improve office productivity which will in turn allow you to realize higher profits, more output, and less money being wasted to lost productivity.

First on the list? Improving office productivity through computer applications:

Science proves that taking more breaks allows us to be more productive.

How does that work if we technically will have less “work time” by taking all these breaks?

It gives us time to collect our thoughts, time to let our mind roam, and even some time to talk and bounce ideas off of others.

So, instead of making employees hate working because you limit them to one break a day; let them take a short one every hour or two and watch the ideas and productivity outputs increase!

Not only should you be organizing your desk, but also the entire office.

A cleared out area allows for a clear mind to work at much higher levels of clarity. Whether you have a cubical office design or a more open concept; requiring all areas of the office to be clear on either a weekly or daily basis should be a must.

Sure, not everyone likes to clear. But, if you give employees 10-15 minutes to clean their area at the end of every day I’m sure most people will be happy to do so (especially if you explain it is part of your initiative to improve productivity in the office)!

Some people have a habit of checking their email every 10 minutes while they are waiting for someone important to get back to them.

In reality, the likelihood of them replying back right away even if you get back to them quick is slim. On top of that, it seems down right desperate.

By implementing 2-3 time periods (again, depending on the department) that people should check their email; you will end the constant refreshing of email pages by a lot of your work force. This allows people to get back to work and pay much more attention to their work at hand.

There can be multiple things wrong with your lighting system that might be throwing off people in the office.

First of all, if you have fluorescent lights then you might just have a few (or a lot) of lights in your office that flicker or even worse, buzz. This can cause eye stress, annoyance, and a general distraction.

On top of that, you may have either an under-lit or over-lit office. Both are bad, and it’s up to you to find the optimal light output for your office. This can be done by surveying employees on your lighting system and going from there.

Lastly, low quality light can be an issue. An easy way to not only improve the quality of light but also get rid of flickering and buzzing light issues is by upgrading your reduce your energy usage by up to 30% or so. Sounds like a win-win situation here!

Not only will they help with productivity, but they will also clean the air of toxins which will keep the air fresh and not-so-stuffy.

Stop making it so difficult to get around. Make it easy to get to the bathroom, to the trash, or even to an outlet.

Time is money, and if people are having to spend time just to get to the most basic things you aren’t setting up your office for success (literally).

Using office design to increase productivity can be difficult, sure. But it doesn’t have to be all that complex. You could even get some people together to brainstorm what could be done to best optimize the space you have to best serve efficiency in the office. So while there will never be the “best office design for productivity” hack or tip (due to all offices being different), you can always use some general guidelines and common sense to help you out.

Wherever the noise may be coming from, while it may not effect everyone it may be effecting some people.

Now, this can be an easy fix if the noise is coming from within the office. To solve this issue, all you need to do is address the area of concern and fix it. But, what if the noise is coming externally on a frequent basis?

Well, you can do either of two things. Firstly, you can try to address or confront the external noise producer and see if there is anyway for it to stop at least during your time of work. If that doesn’t work, then you might need to install sound proofing technology into your walls. This can get pricey sure, but you’ve got to weight the benefits of having less noise in the office versus the cost it is going to be to make the upgrade.

Although you might think that you won’t be able to get everything in if you shorten meetings, you would be mistaken!

In fact, having shorter meetings make them much more focused and thus; more productive. Even if you have two meetings over one a week because they are shorter, it is much better to have two 10 minute meetings over one 30 minute one that lacks purpose.

On top of that, do you really need to have a meeting? Or, are you just holding meetings to “have a meeting?” If it is the latter, try scheduling meetings only when they are needed, rather just out of habit.

Looking for ways to motivate the office into getting stuff done? 43Folders.com and it’s a simple concept: work for ten minutes, break for 2, then repeat this 5 times (or an hour).

You might say, “are you mad?! No way I’ll let my employees take a break every 10 minutes.” But here it out…

Maybe you shouldn’t implement this tactic specifically, but make a variation that works for your needs but still allows for productivity to be most optimal. And yes, there will be times when extreme concentration is required for more than 10-20 minutes, and obviously this doesn’t have to be a “set in stone” type deal. Instead, make it a generally accepted practice to partake in such method of break and work balancing.

(We already talked about more breaks in #3, but we thought this hack was worthy of its own).

Have you ever listed a job listing opportunity with one of the qualifications as “multitasking?” If so, you’ve got it all wrong. In fact, you should be listing a qualifications as “the ability to be laser focused on one thing at a time.”

Multitasking Parkinson’s law” in short says that we will fill whatever time is allotted to complete a given task.

Why do you think people with a 3 month deadline to get a presentation done still find themselves struggling to get it ready to go last minute? Because they will fill the entire time they are given to finish it. This goes with any task, and if you shorten the time allotted to finish tasks you will see more getting done because people will work to fill the allotted time given.

This of course can be used too far and not given enough time to get things done with all the proper due diligence required. Finding a good balance of long enough but not TOO long will be difficult, but start looking into deadlines and what exactly defines how far out they get set and start thinking about setting shorter (yet still doable) deadlines.

Studies show that standing will not only improve health, but it will also improve productivity. Focus goes up and thus more work can get done.

call center workers showed that pollution in the office reduced productivity levels. As you can imagine, pollution is a major issue in a lot of places, especially in bigger cities.