Many people in the Alpharetta area have barns without pole barn lighting. It is still fairly common to see pole barns with no artificial lighting or traditional sodium lights installed. Both options can lead to unsafe situations.

Pole barns have many dark nooks and crannies and often have sharp objects stored in them. Sharp objects plus dark areas is a recipe for injury. To prevent potentially dangerous conditions, you should have a lighting system installed. It is especially important to get these lights installed before winter, as the days are shorter and nights are longer. The pole barn will be left through those long nights without natural or artificial lighting unless you have an electrician install illumination now.

Here are the options:

● Fluorescent Lights. Fluorescent lights are a good option for a relatively small space, especially if the ceilings are low. Fluorescent lights are cheap to buy and run. They are also fairly energy efficient, which means your electrical bill will be lower.

● Halide Lights. While fluorescent lights have long been popular for many residential and commercial applications, halide lights are relatively new. They have been around a few years but are not as common as fluorescent lights due to their more specialized nature. Though halide lights are stronger than fluorescent lights, they do have a few drawbacks. They are more expensive to buy and operate, and they take a while to reach full power after being turned on. Nonetheless, they’re likely the best option for large pole barns because of their power.

How to choose LED lamps. The replacement of lamps in an existing lighting system is connected to a lot of doubts when concerning the replacement of the lamp type. Changing the lamp type is a conventional process. The invention of the CFL lamp in the 90’s allowed users to save energy by replacing their energy consuming incandescent lamps. A lot of labels and graphics on the products packages show the replacing types. There are numerous possible influences on a lighting solution. Changing the lamp is changing the most important factor, the lighting quality. Lamps define the light color, color rendering index, luminous flux (light output or brightness) and installed load.

Changing lamps is nothing else than comparing the features of the old system, characteristics like light color, color rendering index and luminous flux should stay the same, suggested the former illumination has been satisfying. Watch the luminous flux (measured in lumen) and compare them to the already installed one and choose an appropriate lamp. Here is an example which luminous flux (lumens are abbreviated by lm) can be replaced by which lamps:

Don’t get confused by all the lighting features from the labels or packages. Concentrate on the characteristics like light color and color rendering index, they should be the same or at least similar. Choose the lamp according to luminous flux in lumens. Be confident when choosing (LED) lamps. They are efficient and offer twice till three times longer service times Metal Halide light sources.

Electrical conduits are an electrical piping system made of plastic, metal, or fiber, that are used to provide wiring or cable route to protect it. The use, form and installation details for electrical conduits are specified by the wiring regulations such as the US National Electrical Code (NEC) or other national or local code.

The location of an electrical conduit will usually determine what kind of material may be used. Since electrical conduits are used mainly in the outer wall surface in exposed locations, they are made of a material that is either flexible or rigid.

The following are the most commonly used materials:

Rigid steel The type of conduit system that is to be applied depends upon the wall thickness, mechanical stiffness and the material used to make the tubing. The material can be chosen for mechanical protection, corrosion resistance and for cutting the costs on installation charges. As far as wiring regulations for electrical equipment in hazardous areas are concerned, certain kinds of conduits need to be used depending on the regulation specifications.

As a California homeowner, you know that this is not the best time to put your house on the market, which may be why so many people are opting to upgrade their existing homes instead of seeking a replacement. One of the improvements you should consider is an electrical make over.

Electrical wiring can suffer wear and tear, and older homes were simply not built to meet today’s electrical needs, but these deficiencies can be overcome by hiring an experienced electrician. Santa Monica, CA building codes have changed over the years as well, and companies like The Electric Connection that specialize in rewiring older homes can bring your house into compliance with the latest regulations.

If your home was built during the 1960s and 1970s, you may be living in a fire trap. During that time approximately 2 million homes were built or remodeled using aluminum wiring before it was discovered that this type of wiring poses a significant fire hazard. The problem occurs at the electrical connection points where the wiring is spliced to connect to a switch, outlet or circuit breaker. Aluminum expands and shrinks in response to temperature changes, a process which can cause breaks and frays over time. The US Consumer Product and Safety Commission (CPSC) has expressed grave concern over this issue stating that homes with aluminum wiring are up to 50 times more likely to have a fire than homes with copper wiring.

How will you know if you need to have all of the electrical wiring in your house replaced? Fortunately, you may not necessary need a complete rewire in your home or business. A licensed electrician in Santa Monica can evaluate this for you, and tell you to what extent you’ll need to go in order to make your home safe. The Electric Connection, which specializes in house rewires explains that depending on the situation, there might be a fairly inexpensive solution. For example, you may simply need to replace the connection points in your home or business with copper electrical connectors. Not every Santa Monica electrician is trained in this type of retrofit, so you when you’re searching for electrician Santa Monica, it’s important to find a highly trained and fully licensed electrician to perform aluminum-to-copper retrofits.

Older homes, those built prior to 1950, may have a different electrical safety issue. During this time many homes used cloth insulated wiring, something which can appear similar to the insulated wiring used today. The danger builds over time; as the cloth ages it dries and can begin to flake off. Once portions of the wire are exposed, they pose a serious shock and fire danger.

Another challenge presented in older homes or buildings with cloth insulated wiring is that this wiring was frequently not grounded. At the time there were a limited number of electrical appliances and no home computers, so grounding was not considered a serious issue. Today all new homes are grounded so that excess electrical charges caused by electric surges are routed out of the house and into the ground, protecting electronic devices, computers and appliances. An electrician from Santa Monica can replace cloth insulated wiring with a grounded system, making your home and belongings safe from electrical fire and damage caused by power surges.

Another problem with older homes is the lack of three-prong outlets, something that is necessary for most modern appliances. Many homeowners mistakenly think they can simply purchase the three-prong version at the hardware store and swap out their existing two-prong outlets, but doing so can create additional fire risks. Properly swapping out these outlets requires some rewiring so that the three-prong version is grounded. Your Santa Monica electrician can do these quickly and inexpensively for you, and can make certain that any existing three-prong versions have been installed properly.

So how do you determine what type of electrical wiring is in your Santa Monica CA home? The first step is to check the build date. If your home was built before 1950, you can call the Electric Connection for a free electrical estimate by a licensed Santa Monica Electrician. They will be able to quickly evaluate any electrical safety issues that you might have in your home or business electrical system.