We all know that buying and selling a home can be one of the most stressful things we ever do. And if you’re selling your house, it’s extremely important to make sure your home is up to code. Some electrical code violations are illegal, others are dangerous—some are both! There is a major benefit to scheduling an electrical inspection prior to putting your home on the market: you have the ability to correct any electrical code violations ahead of time, which may help in avoiding delays in the negotiation and sale of your home.

Electrical code violations pose serious health and safety risks to anyone in the home. Don’t fall victim to the common wiring problems and mistakes that, left uncorrected, have the potential to cause short circuits, shocks and even fires. Avoid these violations that could cost you your home—and your life:

[Estimated read time: 5 minutes]

With the rising temperatures comes the inevitable rise in energy bills. To keep your home as energy efficient as possible, we’ll be going room by room explaining just how you can save money while keeping your home cool.

Starting with the living room, there are a few simple steps you can take to bring energy savings and make it as energy efficient as possible.

What is Energy Star? Energy Star is a program that offers energy efficient consumer products. Energy efficient appliances with the Energy Star logo typically use around 25% less power than conventional models.

Energy Star products are the way to go if you wish to use less power while also saving big on your energy bill.

As we mentioned in our guide for different types of lightbulbs, there are many options available today which offer different brightness (known as lumens) and use less energy.

By far the best options for lighting your living room are LED light bulbs. These types of light bulbs are energy saving and emit LED lights, which reduce energy consumption considerably.

LEDs might have a higher upfront cost, but they offer an energy saving edge, reducing energy consumption up to 80%.

Power strips are a clean alternative to overfilling your outlets. By conveniently switching off multiple appliances at once, you have complete control over how what appliances get energy.

Traditional power strips are simple: you connect the devices and turn off a switch when not using them. Newer versions called advanced power strips feature a variety of other features that might benefit you.

Advanced power strips are designed for areas where many electronics are plugged in, such as entertainment centers or home offices and provide greater control over energy usage through built-in features.

There are multiple types available right now including:

Some power strips also feature a surge protector which not only give you complete control over your appliances but also protects them from damage during thunderstorms or power surges.

While power strips might be of great help to any home, the main culprit for those extra costs are energy vampire appliances, or appliances that use energy while on stand-by.

Appliances like these could end up costing more than $200 per year for the average home.

Vampire energy loss, also known as vampire load, vampire power, or vampire draw is a simple term to explain the use of electricity by appliances that are in standby or switched off.

While most appliances might indicate that they are turned off, they might still be drawing power. The end result is unneeded power being wasted as appliances lay unused.

Video game consoles such as the Playstation 4 and Xbox One are notable for their high energy demand and could result in up to $40 in costs during standby.

Computers, including laptops, are also some of the biggest energy vampires, costing up to $30 if left plugged in while not in use. Laptops might need less power, but leaving them plugged in could result in yearly costs up to $15 when not in use.

To easily reduce these costs, safely group as many of these appliances into a power strip. By easily switching off the power strip when not in use, you will be much more in control of how much energy they use.

Televisions are the kings of power consumption, with 5 hours of daily use costing up to $160 per year while in standby mode as well as with daily use.

Plasma TVs are notorious for their usage of energy. Instead, opt for LCD screens which will reduce the amount of energy you draw. Also, change your TV’s settings to dial back on energy consumption.

Most TVs have a store demo option selected for the picture which ups the brightness and results in a high energy usage. This translates to higher energy bills and more heat. By using the power-saver mode, you decrease the amount of energy used.

If you have multiple appliances connected to the TV, turn them off when not in use. TV manufacturers of today have reduced the usage of standby power, but connected appliances might draw more energy.

These could include DVRs, Blu-ray or DVD players, as well as streaming devices such as Roku, Apple TV, and more. While useful, they might be putting a dent into your energy bill and end up costing more with time.

Window shades, blinds, and curtains are more than just useful for decorating your living room. Dark curtains block sunlight from entering and can be closed during the day to reduce the amount of sunlight that enters, thereby reducing cooling costs.

Blinds are as useful and can reduce heat gain by up to 45% but offer the benefit of being able to be adjusted manually.

Making your living room as energy efficient as possible might seem like a daunting task. By following the above tips and ensuring that you use only the most important appliances, you will be well on your way to ensuring your home is ready for summer.

From LED Lighting installation, to ceiling fan room installation, Bryant Electric Service can help your living room be the highlight of your home.

Electrical safety is of utmost importance to keep your family and loved ones safe at home. You can be assured of electrical safety through GFCI outlets. GFCI (ground fault circuit interrupter) outlets have three holes: two of the holes are for neutral and hot wire and the third hole in the middle of the outlet serves as a ground wire. If it experiences any change in the electrical flow in the circuit, it will immediately cut off the flow of electricity.

GFCI outlets are important, especially when the electrical outlets are positioned close to water. Installing GFCI outlets in your kitchen, bathrooms, laundry rooms, etc., is a good idea. Apart from being an essential preventive measure, the law also requires you to have GFCI outlets installed throughout your home. According to National Electric Code (NEC), all homes must be equipped with GFCI protection. Initially, it was only required for you to install GFCI outlets near water only but this requirement has been extended to cover all single phase outlets of 125 volts in recent years.

Let us now understand why GFCI outlets are essential in every household.

3 Reasons to Install GFCI Outlets

Electrical shocks and electrocution are the major risks that you can be exposed to through electrical devices at your home. This becomes a bigger concern if you have kids who can unknowingly touch the appliances and get a shock. A GFCI outlet helps in preventing shocks and electrocutions as it has a built-in sensor that monitors the inflow and outflow of the electricity from any appliance. If a live wire inside the appliance comes in contact with the metallic surface of the appliance, you will get a shock when you touch it.

Your home is supposed to be your safe place, your sanctuary, but if you have an older home, it can quickly become a nightmare. Old home wiring, especially if the wiring is 50 years or older , can put your home and everyone it it at risk for an electrical fire. While wiring doesn’t quickly age, it does age, it does break down, and it does carry risks. Keeping an eye on your home’s wiring and the way that it behaves is one of the best ways to avoid an electrical fire and protect your home. Your home is trying to tell you exactly what it needs more often than not, so keep an eye out for some of the following signs that your home’s wiring is too old and needs to be replaced by a professional electrician.

While there could be a variety of reasons you might have dimming or flickering lights in your house, if it becomes a regular occurrence, it’s time to get an electrician out to your house. These kinds of symptoms are your house telling you that there is something going on in your electrical system. Whether it’s that there is too much power being drawn at one time or that the wiring is failing, a licensed electrician can help to diagnose and fix the issue.

If you’ve had a rodent problem in your home at any time, it’s exceptionally important to have your electrical system evaluated. While rodents would prefer to munch on the cereal in your cabinet, there is something about home wiring that is exceptionally appealing to them. While they’re burrowing around in your walls, there is a high chance that they either chomp through wiring or knick it enough to expose the wiring to the insulation in your walls. Both scenarios can put your home at risk for an electrical fire at any time.

If you’ve never had a circuit breaker trip on a regular basis, then you probably don’t know how absolutely frustrating it can be, especially when the problem is probably hidden somewhere behind the walls. A circuit breaker that continues to trip is a big indication that something is wrong with your wiring. Instead of trying to force it on, make sure to call your electrician to help root out the cause of the problem in order to fix it.

If you’ve ever gone to plug in an appliance and been shocked, that’s probably not a good sign. However, if this happens regularly where you get shocked or your switches and outlets start to look discolored from burns, you have a big problem on your hands. These signs are indicative of a wiring problem and wiring shorting from the energy heavy appliances that are more common today. Don’t just hide the problem with a new outlet cover, have the problem checked out and repaired.

Lastly, don’t dismiss random burning smells or the sharp smell of burning ozone. Both could be indicators that something is going on behind your home’s walls that you can’t see. When you flip a light switch, this connects a live electrical wire and allows power to continue into a light fixture or appliance. If there is burning when the switch is flipped on, the odds are the problem is in the wiring that connects the switch and the light fixture. However, a licensed electrician can determine the extent of the damage and what the problem is.

With summer coming to an end, it is an excellent time to take advantage of the cooler weather to get some things down around the house. It is time to prepare for winter and the weather that accompanies the season. While you are taking care of putting away the outdoor furniture and blowing out the sprinklers, it is a good time to call an electrician in Beverly Hills to have an electric safety inspection completed. The team at The Electric Connection is here to help you discover any electric safety problems you may not be aware of. We tend to use more electricity during the winter plugging in Holiday lights, space heaters and spending more time indoors in general. It is important you make sure your home’s electric system is in good, working condition.

During the inspection, the electrician will evaluate your outlets, light switches and the electric panel to see if there are any issues. If you have been experiencing problems with flickering lights, an outlet that doesn’t work all the time or a tripping breaker, you need to let your electrician know. These are subtle warning signs of a bigger problem. You will want to get any Beverly Hills electrical repair work completed sooner rather than later.

You will rest easy knowing your home’s electrical system is up to code and doesn’t pose a serious risk to your family. During the inspection, the electrician will give you recommendations of things you can do yourself or have done by a professional to add another layer of safety to your home. These are optional and you will have the ability to decide if you want to go ahead and have it all taken care of or wait until it is a better time. Don’t delay, call The Electric Connection and schedule your electric inspection today.