How old is your home? Has your electrical system been updated within the last 5 – 10 years? If you haven’t asked these questions recently, it’s probably time to examine your options! Older homes with older electrical systems aren’t typically able to handle the stress of modern electrical appliances. So what can you do to make sure your home can safely run all of your appliances and electronics? Typically, a heavy up can be the answer to your problems. But should you install one? Let the experts at Kolb Electric answer!

A heavy up is an increase in the amperage (power) of your main electrical service. But how can you know if your home is in need of an increase of amperage? There are some things you can check to make sure you’re in need:

Depending on your specific goals, you have a range of upgrades available when thinking about a heavy up. Some service upgrades are as simple as adding a few additional circuit breakers to the existing box, or expanding the box with a subpanel. More complex upgrades may include things like replacing a fuse box or an aging panel with one that allows for higher energy capacity. A Kolb Electrician can evaluate the condition of your current panel with any problems you are experiencing to determine how extensive your upgrades will be.

The time depends on the job. Adding additional breakers to an existing panel is usually pretty quick, often taking less than an hour. Installing a subpanel is not too complicated either, often taking no more than a few hours.

Where it starts to take a long time is when you need to make serious upgrades. If you need to replace a fuse box or circuit main, you could be looking at a job that takes all day.

More than 480,000 house fires were reported in the United States in 2013, according to the National Fire Protection Association, resulting in over 2,800 deaths and more than 14,000 injuries, not to mention more than $9.5 million in property damage. A house fire is reported on the average once every 85 seconds.

A fire can escalate from a spark to a raging blaze in just a matter of minutes. Since it can start behind the walls without being detected until it gets out of control, an electrical fire is especially dangerous.

Unlike storms or other emergencies, fires often leave families with little time to prepare and evacuate the building—so it’s important to stay protected against some of the most common causes. Some of the biggest reasons for household fires are related to electricity, including:

Fortunately, there are many measures you can take to protect yourself and your household or business from a catastrophic electrical fire. One of the most important tips we can give you is to be very careful about who you have work on your electrical circuits and wiring. To avoid an electrical fire, only allow a certified electrician to install new wiring and/or work on your outlets, circuits, or electrical appliances. During your day-to-day routine, stay weary of any open flames, whether on your gas stove, a candle, or a cigarette.

Of course, even the most careful household or building can face an electrical fire. It’s important to have a working smoke detector in place in the event of an emergency (we can help!). You should also devise an evacuation plan and make sure that each family member or employee knows what to do if you have a fire.

Another way to prevent an electrical fire is to stay current with electrical maintenance. At Kolb Electric, we employ only skilled, licensed electricians to work on your wiring. We want you, your home, and your office to stay safe, so we’re careful to send out the best electrician for your particular job.

For more tips on electrical fire prevention or to get top-notch electrical services for your home or building, call us at 877 287-1179. We’ve been providing top-notch installations and maintenance work to Maryland, Virginia, and Washington, DC home and building owners since 1925.

It used to be that the moon and the stars were the brightest bulbs in the sky. But as anyone who’s flown across a city at night knows, these days, there are an awful lot of outdoor lights shining up from the ground.

Many people assume that an orange nighttime sky is just ugly, not harmful. But recently scientific studies have suggested that light pollution is more than an annoyance; it’s destroying wildlife, damaging human health and costing us a lot of extra money.

That’s why a growing number of cities and towns across the United States are drafting ordinances to try to bring the night sky back. They’re requiring that all new outdoor lighting fixtures that are installed – both commercial and residential – only shine light down onto the place that needs to be lit, not up into the atmosphere.

Known as the Dark Sky movement, these ordinances vary from town to town, but often the requirements are similar. No outdoor lighting fixtures can shine any light above a horizontal line. Instead, everything must shine down.

“We’re not saying you can’t have that aesthetic value, you just light it from the top down,” explains Johanna Duffek, Sections Coordinator with the International Dark Sky Association, a Tucson, AZ-based non-profit group that’s at the forefront of the movement.

Although the original purpose of The International Dark Sky Association was to keep the night sky pristine for astronomers, today the Dark Sky movement is gaining ground because more consumers are interested in reducing their energy usage, and when you’re not wasting light that’s going up into the sky, you can use a lower wattage bulb to achieve the same level of exterior lighting.

For example, if a homeowner used an outdoor sconce that had openings on the top and the bottom, he’d have to use a 100-watt bulb. But if he switches to a Dark Sky fixture that only allows light to shine from the bottom of the fixture, the homeowner could use a 40-watt bulb.

“It’s a more efficient use of light,” explains Tom Patterson, Director of Product Development at Hinkley Lighting, which already offers some Dark Sky light fixtures. “You can use a third of the wattage or half of the wattage and get the same amount of lumens.”

Patterson says consumer awareness of the Dark Sky movement is still very low, but he said awareness has been growing among local government leaders, and that is forcing the manufacturers to come out with more and more Dark Sky-friendly outdoor fixtures.

“Now in Arizona, in all the new construction, you’re going to have to meet the dark sky qualifications,” Patterson says. “It’s catching a little bit more momentum.” Hinkley, for example, advertises that it can make about 25 percent of its outdoor lighting fixtures Dark Sky compliant. Retailers are charged about $15 to $20 to change a regular fixture to a Dark Sky fixture.

Currently, there is no official government standard for a Dark Sky fixture, but the International Dark Sky Association has been in talks with the Department of Energy to incorporate the Dark Sky philosophy into the Energy Star program.

The International Dark Sky Association also independently evaluates fixtures from manufacturers and awards a seal of approval to all of those that meet its requirements.

So far, Duffek says the International Dark Sky Association has awarded Fixture Seals of Approval to 75 different lighting manufacturers, and while many of those have been commercial applications, Duffek says the organization is hoping to increase participation among residential lighting manufacturers.

Hubbardton Forge, for example, makes a sconce that has received the Dark Sky Fixture Seal of Approval that features a slate-colored ceramic shield around the light bulb that forces the light down. And the Minka Group has several outdoor lights with metal crowns that block the upward light.

Both Patterson and Duffek say the biggest resistance to Dark Sky fixtures isn’t coming from manufacturers but from homeowners who are afraid that less exterior lighting around their house will make them less safe.

But Duffek said homeowners need to understand that blocking light from going into the sky doesn’t mean blocking all exterior lighting. Duffek says the Dark Sky movement suggests homeowners buy outdoor lights with movement sensors that will go on if someone enters your yard, which can help alert you to danger and keep your energy usage down at the same time.

“When you keep the lighting on all the time, all you’re doing is lighting for the bad guys,” Duffek says.

Duffek says the biggest challenge now is to educate the public about the benefits of reducing light pollution and encouraging manufacturers to continue to design compliant fixtures.

“We always try to present it as a win, win, win solution,” she says.

You are searching for a local electrician.  You Google local electrician but find hundreds of search results.  Rest assured if you are reading this and you live in the Des Moines Iowa metro area and surrounding communities you have found a highly qualified local electrician.  We are central Iowa’s primer local electrician and are ready to help you with your residential or commercial electrical project.  Go with a trusted local electrician.  Go with Custom Electrical Services, we are a local electrician and open 24 hours per day.

When choosing a local electrician there are important things to consider.  You want to make sure you are getting the most qualified and rebuttal local electrician for your project or electrical repair.

We will only send a trusted and local electrician to your home.  Only choose a local electrical contractor that uses independent third party verification of its employees.  We only employ local electricians that receive the technician seal of safety.  Your safety is of the up most important to us!  Call Custom Electrical Services today and have one of our trusted local electricians provide you with the best customer service experience possible.

Go with an local electrical contractor that never closes!

Categories: Local Electrician« Team Member Spotlight  |  Ceiling Fan Winner! »