When a light switch or electrical outlet doesn’t function correctly, a professional electrician can trace this back to a variety of causes. First, it’s possible this non-functioning device was never connected to the wiring in your building. Secondly, the circuit affected by a switch or outlet may not be completed because of another component. For example, a switch may control an outlet which is unoccupied by a lamp or any other electrical device. Also, an outlet may be connected to a switch which is in the off position. A third cause might be related to a defective breaker, or a breaker which was tripped or turned off, but never switched back on. However, a fourth possibility may relate to a much larger problem.

Sometimes, a switch or outlet fails when it is damaged by arcing. If the arcing was caused by a connection to aluminum wiring, great potential hazards exist. If your home or building was constructed or renovated before 1972, or during the late sixties, it may contain aluminum wiring. Aluminum wiring was used legally during those years, but outlawed for installation in new homes, commercial buildings, remodels and renovations after it was identified with conditions which could lead to electrical fires.

Although aluminum wiring itself is generally no more hazardous than copper, its splices and connections with other metals present a real hazard because they can become corroded and begin arcing. Because arcing in these connections can lead to a fire within surrounding materials, aluminum wire was discontinued. However, many homes still contain aluminum wiring, and research conducted by the Consumer Product Safety Commission (CPSC) reveals that buildings with aluminum wiring pose a fire risk which is 55 times greater than the risks with similar structures wired with copper. So, if you discover an electrical outlet or switch which doesn’t appear to be functioning correctly, it’s possible this outlet or switch was damaged by a connection with aluminum wiring.

If you have safety questions about this type of problem, or any electrical concerns regarding your residence or commercial building, please contact Bryant Electric Service at 512-402-8587. Our licensed electricians are trained and equipped to perform professional safety inspections, and they can repair any type of electrical problem.

Doing work around the house without calling for help is a common point of pride for many people, but an amateur should never tackle an electrical panel installation — regardless of the bragging rights on the line. No amount of pride is worth an incorrect electrical panel installation, especially when you consider just how important and complicated this component can be. Additionally, you should remember that electrical work can be extremely dangerous for anyone who isn’t a professional.

This principle most definitely applies to putting in a new electrical panel. If you’re knowledgeable enough, you may be capable of replacing an outlet or switch on your own. For bigger jobs like this, however, it is critical that you bring in an electrician. Not only would you be in danger during the installation itself, but even small mistakes made during the process can lead to future risk of fires and electrocution.

Electrical code requirements control the size of a panel in a newly built or renovated home, and these rules can vary based on your location. There is a reason there are strict measures for electrical panel installation, and those reasons are clear when you consider just how important these panels are. Panels are essentially a central hub for the electrical system in your home. They are an important safety measure as well. The power that comes in from the electric company passes through your electrical meter, and then into the panel. The panel directs the electricity through your home.

Electrical panels use circuit breakers, which control the amount of current provided to an outlet. They also serve to protect your system (and home) from power surges. If the breaker identifies an excessive amount of current, it shuts it off and protects components from the overload. It does this in a fraction of a second. This keeps appliances safe and also protects your home from the risk of a fire.

An incorrect electrical panel installation undermines the safety measures of your panel. An inexperienced installer might accidentally connect a wire to a breaker designated to allow more current than the wire can safely handle. This means unsafe amounts of electricity would be passing through, and the panel would not be able to do anything about it. An overloaded wire could easily spark, which could then lead to a fire.

An electrical panel isn’t a component you want to worry about after installation. Unless you’re a professional, there’s no way you can promise this won’t be an issue after you’ve finished working. Beyond that, an experienced electrician can make sure the panel lasts for a long time.

By using sophisticated equipment and materials, as well as in-depth knowledge of local energy code requirements, a professional will be able to achieve a level of efficiency and quality that would be out of reach for any amateur. Your home will be better protected from future issues after thorough wire testing once the installation is complete. A new panel installation is an involved, intricate process, and it’s important that even the smallest steps are correct.

The need for upgrading electrical wiring in homes is becoming more prevalent these days as homeowners use more and more devices and appliances that require additional electricity. Long gone are the days when kitchen appliances, one television set, and a few lamps were the primary electrical draws. Now, there are multiple device chargers, multiple televisions, computers, video game consoles, and more to plug into outlets throughout the home. Upgrading electrical wiring will ensure you can continue accessing the electricity you need safely and efficiently.

If you live in an older home, the need for new electrical wiring may be even more urgent, because wiring from 30 years ago can typically not support modern day electrical needs. Faulty or problematic wiring is a leading cause of residential fires, so this is definitely not something to put off if you think there may be an issue.

Signs that you need professional assistance for upgrading electrical wiring and even emergency electrical help include:

Whether you are dealing with an emergency situation or just think it’s time to upgrade the electrical wiring in your home, you may be wondering what you can expect when you schedule an appointment. First, an expert electrician will come to your home to ensure your wiring system is capable of handling all of your current electrical needs. If he discovers it is not, he will notify you of your need for an upgrade in the electrical panel and/or wiring. You may also need to upgrade electrical receptacles and fixtures.

From there, you can expect the following:

If you want to learn more about upgrading electrical wiring in your home or are ready to schedule an appointment for our professional electrical services, contact us today.