Tripped circuit breaker: many of us have experienced them at some point in our homes, yet instead of asking ourselves, “Why Do Breakers Trip?”, we reset the breaker without much thought. Before flipping the switch back over to the “ON” position, however, it’s important to understand why the breaker tripped in the first place, and what can be done to keep it from happening again.

Ignoring a Tripped Breaker is Not a Good Idea

Because of the many reasons why your circuit breaker could be tripping, and because of the purpose of the circuit breaker, you should never take a tripped breaker lightly. It’s important to understand that the circuit breaker is a safety device; simply switching the circuit back on without investigating the culprit can become costly in the long run and, in many cases, extremely dangerous.

If you work in hazardous locations and conditions, you would understand the need to promote safety and ensure that the risk of explosions is reduced. It is crucial that you eliminate one or more component of the ignition triangle to minimize the chances of an explosion. The 3 protection methods listed below are widely used in hazardous locations, in the process control industry:

Before we delve a little deeper and understand these techniques, let’s take a quick look at the role electrical enclosures.

Electrical enclosures are cabinets containing different electrical components such as switches, sockets, plugs, knobs, transformers and controls. These keep the surroundings safe from any kind of electrical hazard. Such enclosures are resistant to spark and shock and they have a high tolerance to extreme temperatures. They must be used in hazardous locations as they keep an interior explosion from spreading to the external environment and damaging life and property. Let’s see how they are relevant in the Containment method of protection:

Over the years, our clients have asked many questions about their electrical systems; how to best care for them, what the cause of certain issues are, and more. We’ve compiled just a few of the most common questions we get below, with our responses.

A: Is the switch all the way in the “off” position? You have to feel it click off before you can reset it. If you are able to return it to the “on” position—you’ll feel another click—and it does not trip again, then you were successful. If it continues to trip, then there could be a chance that you have a short circuit or an overloaded circuit. Quite often, an electrical panel upgrade is the solution.

A: There are a number of possible reasons this can be occurring. First, check for a tripped circuit breaker. Then, if it’s a GFCI outlet, check for a reset button right on the outlet itself. Push that, if there is one. In the absence of either of these issues, then it may just be an old outlet that needs replacing. Just like any other electrical component, it can wear out over time and is usually no reason for huge concern.

Do, though, make sure you don’t smell or see any smoke or smoldering—this can be indicative of frayed wires starting an electrical fire. If you do detect smoke, your next step is to call the fire department.

Flickering can happen with certain types of lightbulbs and are sometimes not a cause for concern at all. However, if either of flickering or dimmer are occurring when you turn something on or an appliance cycles on in your home, then you probably have an overloaded electrical panel. Another possibility is that the lightbulbs you have installed in whatever fixture is creating the issues are not adequate bulbs for that fixture.

We’ve added linkable linear LED light fixtures to our home, commercial, and industrial product lines. The 5-foot fixtures can be used for anything from parking garage, warehouse, and tunnel lighting to supermarket, workbench, or home garage lighting. These LED fixtures can be easily connected with compatible Super Bright LEDs accessories to create a powerful, energy-efficient light series.

Using no more than 50 watts of power, the 4- and 5-foot linear LED lights emit 5,500 or 6,500 lumens, respectively, of bright natural white illumination. They’re designed to replace 250- or 320-watt fluorescent tube light fixtures but will last five times longer. These LED fixtures illuminate instantly and don’t emit the yellow-green hue that is typical of fluorescent lights.

The weatherproof linkable lights have sturdy aluminum housings and shatterproof polycarbonate lenses. They’re dust tight as well as water and impact resistant. Twenty 5-foot fixtures can be connected in a series, and up to 25 4-foot fixtures can be linked. Mounting brackets are included for wall or ceiling installation, and a suspension kit is also available.