The choice of a LED product is guided by watching specifications tables. Here is one table accompanied by the explanation of the features. The result should be a good lighting solution that is leaving a green ecological footprint. A good lighting solution is emitting enough light that the tasks in space can be conducted properly. First the lumens of the fixture (responsible for brightness in the room), the CRI (how good is the lighting concept representing colors), color temperature (how is the ambience in the room) and lumen per watt (efficiency of the system) are recommended to be watched. These criteria are responsible for a good lighting quality and energy efficient solution.

The other features are necessary information too. They serve further details about the fixture, the setup and maintenance of the lighting system.

(1) Type: The products name is a detail for purchasing the fixture

(2) Wattage: Defines the energy consumption of the fixture, which is important for the electrician and the ecological footprint of the system (referring to Lumens per Watts)

(3) CRI: Important character in areas where colors should be truly represented. For applications where people are involved, a CRI lower than 70 is not recommended. In shopping areas a CRI of 90 and higher is applicable.

(4) Lumens: responsible for the brightness in a room. The more lumens, the brighter the fixture is illuminating the space.

(5) Lumen per Watt: Efficiency of the lighting system. The higher the lm/W the better the ecological footprint of the product.

(6) Lumen Maintenance: how fast LEDs lose their brightness compared to new products (most manufacturers refer to the time when most of the LEDs reach 70% and less of the initial lumen output)

(7) Color Temperature: defines the mood or ambience in a room. Low quality lighting fixtures mostly have a very cool color temperature as these LEDs are more efficient than warm white LED products. A color temperature higher than 6000K is not recommended for a lot of areas.

(8) Beam Angle: the light is radiated into the indicated beam angle. LEDs are direct light sources with typical beam angles of 120° till 180°.

(9) Life Hours: defines the lifetime of a LED product. LEDs last 50,000h up to 100,000h.

(10) Replaces: a helpful information for replacing conventional light sources

(11) Working Voltage: high quality LED products have an integrated driver, Retrofit Solutions are delivered with the suitable ballast already.

(12) Frequency: detail about the admitted voltage frequency

(13) Power Factor: Efficiency of the ballast

(14) THD: Total harmonic distortion is describing the distortion caused by ballasts and other inductive loads of the input current on alternating current (AC) power systems

(15) Operating Temperature: The light source is operating under the mentioned conditions according to the manufacturer datasheet, other temperatures will cause the light source to fail or work not properly (e.g. light loss, different color temperature)

(16) IP Rating: the protection of the light source, ballast and wiring against liquids and solid objects

(17) Dimmable: dimming is the change in light source brightness, mostly undertaken by smart controls

(18) Dimensions: the fixture’s size, important for the definition of the mounting position and space

(19) Net Weight: the fixture’s weight, important for the mounting construction, e.g.ceiling strongness needs to be considered

(20) Housing: the housing is the surrounding of the light source and ballast, the higher the IP rating, the better the protection against liquids and solid objects which is important in car washes for example, the coating is important in swimming halls where the luminaires are exposed to chloride and humid conditions

(21) Mounting: possible mounting ways like pendant, surface or hock mount

(22) Warranty: how long after purchasing, the products are ensured working properly

When you see your kid crawling or walking for the first time, it’s monumental. This is something you simply do not want to miss. But as you’re trying to get a snapshot of this wonderful moment, a thought pops into your head: My child can now go anywhere in this home. You now begin to see your home differently. All of a sudden it feels like a danger zone. The loose wires over there. The dangling electrical cords right here. The numerous empty electrical sockets that appear so inviting to tiny hands.  Before you panic, though, let us put you at ease! Follow these simple tips for childproofing your home!

About 80% of dwellings were built before the year 1990. While they may have complied with the safety standards at the time of construction, those standards might not be relevant in today’s day and age. Significant changes were made in electrical standards since 1990 and the protection technologies of today were not available or required back then. You must ensure that the standards maintained in such existing accommodations are raised to the electrical safety levels of the current standards.

Understanding the Risks at Existing Accommodation

Extensive safety studies must be carried out in the existing residential buildings to determine the disparity between the required safety standards and the existing safety standards. If the existing standards fall a little short, you must show an urgency to raise the level of safety of these buildings and bring them up to the current standards.

Thankfully, it isn’t too complicated or difficult to do so. You can take small steps to gradually improve the electrical safety through a program of manual safety audits.

3 Ways Current Safety Standards Help in Reducing Electrical Risks

Importance of Verification

The current electrical standards ensure that the new residential electrical installations are safe and that they remain so over their entire lifetime. IEC 60364-6 defines both initial verification of an installation as well as verification of residential dwellings every 10 years. The periodic verification ensures that the fundamental protective measures remain active and reliable.

Recommended Periodic Auditing

There must be periodic auditing to ensure that the safety conditions are up to the mark. The audits need to be simple and based on visual checks. They need to be performed by a qualified auditor, who can then inform the owner of any possible safety issues. The owner will then take responsibility for arranging any necessary repair work. The frequency of inspection can be defined by each country, either by a specific period (e.g., 10 years), or triggered by an event such as the sale or rental of a dwelling.

Now, why is the blue LED so important? Quite simply because there are no white LEDs. The white light that our eyes detect is created by using a blue LED and some yellow phosphor. The yellow phosphor coating may be placed directly on the blue LED or on the glass envelope that houses the blue LED. Either way when the blue light from the blue LED passes through the yellow phosphor the resulting light appears to be white.

In late 2014 at the Nobel Prize Award Ceremony in Stockholm, Sweden, the three Japanese scientists who developed the blue LED while working at Nichia Chemicals will share the Nobel Prize in Physics for their work on the blue LED. In official terms the Nobel Committee awarded this year’s physics prize to Isamu Akasaki, Hiroshi Amano, and Shuji Nakamura “for the invention of efficient blue light-emitting diodes which has enabled bright and energy-saving white light sources.”

Furthermore, the Nobel Committee pointed out in its announcement that the results of all the scientists’ hard work will be on display everywhere as the three recipients make their way through Stockholm: “the light from their invention will be glowing in virtually all the windows of the city.” And they can be assured that, as this century progresses, the ascendancy of the LED will only become more dramatic.

Custom Electrical Services has electricians in Adel 24/7 365.  Not only do our electricians service Adel, some live there.  They are embedded in the community, participate in activities and are proud to be apart of Adel Iowa.  If you are looking for some electricians in Adel for you next electrical project or electrical emergency please do not hesitate to give us a call no matter what time of day or night it is.  We are experts in older and existing wiring.  We also wire 300+ new construction houses each and every year.

At Custom Electrical Services we understand that not all electrical emergencies happen during the day.  We understand that you may be experincing an electrical emergency at night or on the weekend.  If you have an electrical issue that requires immediate attention please do not hesitate to give us a call.  Our electricians in Adel will help you no matter what time of day or night it is.  Our service vans our fully stocked, some

even call them a warehouse on wheels.  Even if we do not have the part you need on our van we have 24 hour access to all the major electrical wholesale warehouses in the Des Moines metro.  If we do have to go get a part you wont be charged anything additional.

Review – Adel Customer

We work extremely hard to make sure you are 100% satisfied.  That is why we offer a 100% satisfaction guarantee as well as a 5 year warranty.  We understand that your home is your castle and we want you to enjoy your experience with us.  You can see some recent reviews here, or you can click on the review link on the home page of our website.  At Custom Electrical Services our slogan is “Dedicated to Customer Services and Electrical Excellence”.

Everyone needs to be safe.  You need to know you will be safe with the person coming into your home.  Also, the work they will be performing needs to be safe.  At Custom Electrical Services we are not just going to send any electrician into your Adel home.  We will send the best one available.  Our electricians are full time team members, not sub contractors.  All of our electricians undergo a thorough background check as well as a drug screen.  Our electricians in Adel proudly wear the Seal Of Safety badge and wear it with honor.  All of our electricians are uniformed, professional, and courteous.  They take pride in there work, clean up after themselves and won’t leave until your 100% satisfied.

We do most anything electrical!  What every your electrical needs are chances are we do it.  We can repair or replace old and damaged wiring as well as wire that brand new custom home.  Any size project is welcome from hanging a ceiling fan or replacing one outlet to rewiring your entire home and everything in between.  We also have bucket truck services, trenching, and can install, sell, and service any backup generator.  Our electricians in Adel will be glad to help!  From the simplest of projects to the most lavish, we will help you every step of the way.