You may not be aware, but you can have Lower Electric Bills by changing how and when you use electricity during times that the electric company considers “peak demand” or “peak usage” hours.  Electric companies have been initiating peak usage fees for some time now, essentially charging customers more to use electricity when the demand is higher.  This is usually when more people are at home and actively operating appliances, for instance, during a hot summer month when everyone’s air conditioning is running, or around dinner time when TV’s and ovens are working along with the air conditioners. This allows the electric company to make more profit and increase revenues when most people can’t help but use more electricity as a part of their daily life. Luckily, licensed Top Dallas Electrician, ElectricMan Inc. can offer a way to avoid these charges, and Lower Electric Bills by making sure that you are using the least amount of electric company power as possible during peak times.

An Indoor Generator is a unique solution that allows you to store power, either from your power grid when it is cheaper, or utilizing other renewable energy sources, and decide when you want to use it. This highly intelligent equipment allows you to program when and where you get your electricity, providing incredible independence and capabilities for Lower Electric Bills.

Take this as an example.  One local electric company uses a general rule of enforcing peak usage fees between 4pm and 8pm, so programming your system to use power stored during off peak hours at these times will allow you to stop paying these peak usage fees, and only pay the standard rate for electricity during normal usage hours.  This is a far more effective solution, since it is impractical for most home owners to change their schedule and stop using power during these times.

Once you have an Indoor Generator system in place and programmed, the system will automatically switch to your stored power during the times that you have chosen, leaving you worry free about when you are using your electricity!

For more energy saving tips on how to Lower Electric Bills,  information on an Indoor Generator for your home, or any other services provided by Top Dallas Electrician, ElectricMan Inc. visit our website at www.electricmaninc.com, or give us a call at 972-792-7270 to talk about how we can help!

Energy deregulation gives consumers choices when it comes to the companies that provide their home electricity. Suppliers can compete for your electricity dollars in a variety of ways, offering low prices, short and long-term contracts, fixed or variable rates, and a choice in how your energy is generated. The sheer volume of options can seem so complicated that you need to ask an electrician to help you tangle out the pros and cons of the available plans. One area in particular that can trip up consumers has to do with whether the source of their electricity is green or renewable. Read on to learn the difference.

Green Customers are Loyal Customers

Currently, 15 states plus Washington, D.C. have active electricity deregulation programs, according to the U.S. Energy Information Administration, and these states are largely concentrated in the Northeast. Consumers who live in deregulated states are likely to be flooded with energy offers, often promising electricity that is derived from green or renewable sources. Purchasing this environmentally friendly power usually costs a bit more than electricity that comes from more traditional sources like coal, but some homeowners like to put their money where their mouth is when it comes to reducing carbon emissions.

Those customers who go green are valuable to the supplier because they are less likely to jump ship based on the availability of a cheaper energy source. "A customer on a renewable-energy product has actively decided what is important to them and has selected their supplier accordingly," Ritchie Hudson, Pennsylvania chairman of the Retail Energy Supply Association, said to the Philadelphia Inquirer.

A Question of Semantics

However, while many suppliers and consumers treat green and renewable sources of electricity as synonymous, there is a distinction. Green energy is that which comes from specific sources that have the highest environmental benefit, including solar, wind, geothermal, biogas, eligible biomass and small hydroelectric sources, according to the Environmental Protection Agency. Meanwhile, renewable energy “includes resources that rely on fuel sources that restore themselves over short periods of time and do not diminish,” which includes all the green options but also other sources such as large hydroelectric dams, which present certain environmental tradeoffs.

That means that if you really want to limit your impact on the Earth as much as possible, go green in lieu of simply choosing renewable energy. You can further refine your choices by asking about the specific source of the electricity, if you have a preference for solar, wind or another option.

Ask an Electrician About Your Options

Deregulated energy markets give you flexibility, but can also sow consumer confusion. If you need help deciphering the offerings of your state's electricity providers, ask an electrician who can walk you through your choices.

Maintenance Factor

Illumination Systems are designed to fulfill the required lighting level at the end of an operation term and not at day one of the new installation. The luminous flux of the system is going down over lifetime. This is a normal process, no product is lasting forever but the required illuminance levels should not be depreciated at any time. If a lighting system is setup, the maintenance plan has to be fixed too. So the facility managers know how often to clean the room, the luminaries and how frequently to change lamps. A reasonable time needs to be found between maintenance and operating hours, as maintenance cycles are connected to costs. The longer the operation time without maintenance, the more luminaries need to be installed to guarantee the required illumination level at the end of the term. The more frequent the maintenance cycles, the higher the maintenance factor, but also the related costs for the facility service.

Which Points are influencing the Maintenance Factor? Different factors influence the decrease in lighting level like the soiling of the room surfaces, the soiling of the luminaries, depreciation of luminous flux by the light sources or lamps failure.

Room Surface Maintenance Factor: The room surface maintenance factor is the ratio of the room surfaces reflectance before and after cleaning. It is the reduction of the lighting level according to soiling of the room. Luminaire Maintenance Factor: The luminarie maintenance factor is the ration of the luminaries luminous flux before and after cleaning. It depends on the luminarie construction and design (open housing or closed one) as well as on environmental conditions (dirty or clean). Lamp Lumen Maintenance Factor: The lamp lumen maintenance factor is the ration of luminous flux at a specific time compared to a new lamp. It is describing the aging of the lamp or the reduction of light intensity over time. Manufacturers offer comprehensive tables about their lamps luminous flux behavior. Lamp Survival Factor: The lamp survival factor depends on the service lifetime of a lamp. Some lamp lifetimes are reduced by frequent switching. The lamp manufacturers provide tables indicating the lamp survival factor. If a lamp is not working any more, the decision for immediate replacement or group replacement needs to be taken. If the lamp is replaced immediately (mostly in areas where the luminaire is easily reachable) the LSF can be set 1. On the other hand, the decision could be to replace lamps in special terms or group-wise. This could be the case in huge halls, where machines need to be stopped to reach the luminaires.

A maintenance factor of 0.8 shows, that the new lighting system needs to be over driven by 25% not to undercut the minimum required illumination level after 10 years. LED lighting systems are flexible and easy to connect to control systems. The installed load will provide efficient luminous flux at the end of the operation time but the energy that is “over” in the beginning can be saved. The new installation would illuminate an area with required 300lx by about 450lx. The energy can be saved by lighting management systems that are regulating the power concerning the luminous flux depreciation. HID lamps are not easy to control. The energy load that is “over” in the beginning is wasted. No change to save it.

Conclusion: Think carefully when setting up a lighting installations maintenance plan. This starts already with the choice for the light source. LED Modules are efficient, likely not failing and offer long lifetimes between 50,000h and 100,000h. The control possibilities are comprehensive. The luminaries overload, that needs to be installed to guarantee the end of lifetime illuminance levels, can be saved by light management systems. Regarding all the mentioned points, LED is the competing light source. The features are dominant over traditional light sources. Take the chance and install or renew your lighting system by  energy efficient LED light sources and luminaries. If you have further questions please contact the lighting experts at MyLEDLightingGuide.com and discuss products as well as solutions.

When homeowners think about licensed and bonded electricians, they mainly think about them in terms of fixing broken outlets in the bathroom or kitchen. Sometimes they know they need a pro for landscape lighting needs. But there are a multitude of jobs that residential electrical repair services perform.

Moving to a new home?

What you say you are moving to a new home it doesn’t always mean you’re are moving into a recently built home. Many, many people like to purchase older homes and put their own personal marks on them. Usually this means updating the kitchens and baths. A plain kitchen it turned into a chef’s kitchen with all the updated appliances. Will the electrical panel be able to handle the current for all these appliances?

Luxurious master baths are now the norm with the look and feel of an expensive spa. Along with the spa comes the jetted tub. Can the prevailing electricity run the current needed for the tub? Oftentimes the panel needs an addition to accommodate the tub jets working while other appliances are in use.

Remaining in your current home?

If you are staying where you are, you still may be thinking about making updates. The same situations apply to you. So many people like to watch the television programs about flipping homes and those about modifying homes to sell or to live in. It is not a surprise to the slippers or the construction crews when they tell their hosts that a totally new electrical panel needs to be installed or that the whole house needs rewiring. The only way you will know if you have these issues is to have your electrical system inspected by a licensed electrician.

Has your cooktop or range exhaust stopped working on your electric range? It’s time to call in an electrician. Maybe your ceiling fan has quit working and you are waiting to purchase a new one. Have you had an electrician look at it to determine the problem? He may be able to repair it and save you from buying a new one.

Want to protect you and your family with outdoor lights that come on when someone walks past your windows or doors? Your local electrician can handle that job for you. Are you considering a new hybrid car that runs on electricity? You will need a licensed electrician to install your charging station.

Trust your electrician

One you have used a bonded and insured electrician you trust, he can be your friend for life. He may even become a member of the family. When you are having electrical problems or you want to add services, he will look at the situation 360 degrees. He will view it from all angles. He knows you and your family. He will make recommendations – sometimes there will be several options. Ultimately it is your decision.

The bottom line is that you want to keep your family safe. You also want your most expensive investment to be in perfect working order.