We all know or at least heard that converting from Metal Halide (High Intensity Discharge) to LED will save you money.

But how much? Are there any other reasons or difference you should know about?

In this article, we break down all the factors that you should be aware of before making a decision to convert from Metal Halide to LED. Here are the 9 reasons we think LED wins over Metal Halide.

Let’s take a look at the information on a typical 400 watt metal halide bulb. While specifications may vary, a visit to a popular online website that sells Metal Halide bulbs shows that a brand new bulb has the following specifications:

We have just as many customers wanting to convert to LED because of maintenance savings as they do for energy savings. Think about what we discussed, over the life of the LED retrofit kit, a customer would have to do 5-6 Metal Halide replacements. The higher the installation height, the higher the cost of replacement. And if you have a facility loaded with lights, this becomes a significant budget amount every year that you must take into consideration. Now, we know that reduced maintenance time on lights does not translate into dollars saved because it is highly unlikely that people will lose their jobs over the fact there is much less work to do. However, these people will have time to now work on things that matter, like fixing the machines that make the company money instead on replacing lights that cost the company money.

When you take a measurement of light with a light meter, it reads lumens. And this measurement of all the lights that contribute to the light at that location creates a measurement called foot candles. But let’s think about that light that is being measured. Metal Halide creates all sorts of light, in all spectrum’s, visible or otherwise. This includes UV and IR spectrum’s, visible to the measuring device but not visible to the human eye. LED, on the other hand, does not produce UV and IR. Therefore, its readings using the same light meter is only picking up visible spectrum’s.

So there is a fun little test you can do. Have 2 light sources, LED and Metal Halide. And first ask, which one is brighter? And if the right LED source was selected, they should say LED. And then use a light meter, and the light meter may say the Metal Halide area is producing more foot candles. And so now you know part of the reason, but wait, there’s 2 other pieces of information you need to know.

Click here to see our infographic on Retrofitting vs Replacing.

Conclusion

This post is part of a series designed to help newlyweds get the most out of lighting. Also be sure to check out our post about Click here for the perfect soundtrack for this post, then grab your bags and passports, because we’re taking you on a worldwide tour to find the most exsquisite, romantic lighting around the globe! The following list details some of the best honeymoon destinations in the world that are perfect for lovers of light.

1) Paris, France.

2) Las Vegas, Nevada, USA.

3) Alaska, Norway, Greenland… etc.

Basically, anywhere you can see the honeymoon packages that include viewing the northern lights, so you’ve definitely got a lot of options. Bonus: the University of Alaska has an Image via niagarafallslive.com

4)  Niagara Falls, New York, USA.

What’s better than mixing the breathtaking power of North America’s biggest waterfall with the dazzling glow of colored lights? You can enjoy the raw beauty of nature and the fascinating art of a light show at night. Combine that with the rustic charm of upstate New York and the Canadian border towns, and you won’t be disappointed!

5) Outer Banks, North Carolina, USA.

6) Anywhere you can get away from light polution.

You have probably heard it time and again; we need to reduce the demand on our natural resources. We also know we should be saving a little more for our retirement, but it seems like there is no way around the basic monthly bills. No matter what you do, it may seem like you are still breaking even. You shut off lights and walk to work once a week, but the electric bill stays the same and your gas bill is the same. That is likely due to rising rates. Imagine if you didn’t make an effort to reduce your monthly bills? You would be paying more! Your Pasadena electrician is here to encourage you to learn about phantom power and to do your best to fight back against it. You can always call The Electric Connection if you have questions.

Phantom power is a very real thing! You can put a few extra dollars in your pocket every month by fighting back against this electricity sucking phenomena, but it will require your whole house to be on board. According to the Lawrence Berkley National Library, every home has about 40 appliances in the home that remain plugged in around the clock. The appliances may rarely be used, but we keep them plugged in because it is convenient. This is costing us money. In fact, it is estimated phantom power accounts for about 10 percent of an electricity bill. So, assuming your electric bill is $100 every month, $10 of that is all for naught. For the blinking light on the DVD player you haven’t used in a month or the cell phone charger that stays plugged in all day and night whether your phone is attached or not.

If you are not completely sure what phantom power is or have more questions about it, call your electrician. Pasadena residents can count on the team at The Electric Connection to provide the answers to your electric questions.

Most new buildings are now using a variety of electrical and electronic equipment. As such, the contractors have to design a wiring schematic that will deliver power to a wide and diverse range of devices that include traditional and modern electrical loads.  The wiring must also provide a means of supplying power to the monitoring and control devices such as wireless sensors, thermostats, automatic light controls, thermostats, the IoT, and other web-based technologies.

The electrical requirements will vary from one building to another and may include a combination of the following components:

The type and use of a building structure influences the type of wiring to use. And the building owner and electrical contractor should consider current and future power requirements when determining the size of conductors, raceways, protective gear and other necessities.

Power failures are frustrating and difficult in ways people don't always understand. Being used to having a steady power source, you don't always think of the full effects of a power outage. If the power outage is short, it can be fun to have a cookout on a grill and a family dinner by candlelight. The TV doesn't work, so you might find a movie to watch on your computer, until you realize you don't have enough battery life and there is no way to recharge it. You want to call the power company to find out what is going on, but they put you on hold and again, there's no way to charge your phone battery. You might decide to go out to eat or even stay with friends, but you, your spouse, and your children need to bathe first and there's no hot water.

Today: Backup Power Source