Fixing things around the house is what you do when you own a home. You probably enjoy taking matters into your own hands and fixing the little things. It is gives you a sense of pride when you look at a project you took on and finished it. You can say you fixed that or you built that. There are some projects that are too big for you to possibly handle yourself so you call a contractor in the business who can paint the exterior of your home, install new cabinets or take care of some of the landscaping issues. This too is a part of home ownership—knowing when to call for help. Electrical repair on new installation of fixtures and appliances is also best left to a qualified electrician like those at The Electric Connection.

It isn’t about pride. It is all about safety. Handling electricity is dangerous and you should never attempt it unless you have adequate training, like an electrician certified in the state of California. There are some dangers associated with electrical repair work in the home.

*Completing work yourself without the proper licensing could void your homeowner’s insurance policy. If there were an incident, you may not be covered.

*The risk of electrocution is very high when you are not familiar with wiring basics. You risk severe injury or even death.

*It will end up costing you more money to fix a mistake that was made in a DIY situation.

*You risk violating city codes and having to pay a fine, tearing out everything that was done and hiring a licensed electrician to complete the work.

*Fire is another real possibility when you undertake your own electrical repairs. The fire may not start right away, but it is a silent threat that can and will strike without warning.

Your home and your safety are worth spending the extra money to hire a professional. Don’t put your life at risk or risk the lives of your family members because you think you are going to save a few dollars. You won’t. Call The Electric Connection today and let us help you safely take care of any electrical work in your house.

As summer comes to an end, so do those long days and short nights. Now, when you head to work in the morning or the kids go off to school, there is a pretty good chance the sun is just barely breaking the horizon. Although we move are clocks back to make the best of the short winter days, it isn’t enough and we need extra security lighting to make sure we are coming and going with plenty of light brightening our paths. A Burbank electrician can help you enhance the safety of your family’s comings and goings by installing security lights. The Electric Connection has a team of qualified electricians to make this happen.

You have several choices when it comes to picking the right security lighting for your home. Solar lighting is really not an ideal option for the short winter days. While it works great for summer nights, you will want to have something a little more reliable. Electric pathway lights are perfect for illuminating the path between the door and driveway and can be set up on a timer to come on when you need them. Another option is the mounted security light. This can be put up to illuminate a driveway, the pathway to the door or a dark area in your landscaping. This particular type of light is much brighter and can spread light over a large area.

These will need to be installed by an electrician. Burbank homeowners can choose to have these lights on a timer, a manual switch or the common motion-detector system. The timers and motion-detection systems are a little more energy efficient and prevent the light remaining on when it isn’t needed. If you would like to learn more about your options for security lighting, give The Electric Connection a call today.

Perhaps you've always wondered what's in the mysterious metal box on the basement wall. It's a circuit breaker box, and without it your whole home electric system would be unsafe, leaving you in danger.

Circuit box repairs or upgrades require an expert, but you don't need to be a master electrician to understand the basics of how it functions. The most common problem is a tripped circuit, and you can usually reset it yourself.

What's in the Box?

The circuit box is frequently found in the basement, although it could also be in a garage, closet, utility room or even outside. All the electricity coming into your house flows through the box.

If you open the metal door, you see a bank of switches. Each one corresponds roughly to a room in the house, while certain outlets for major appliances like the washer or furnace probably have their own switch. They should be labeled.

There also may be a main disconnect breaker, usually at the top of the box, which allows you to cut off power to the entire house. In many newer homes the main disconnect may be outside near the electric meter. Some homes do not even have one. This is useful if you are doing electrical work in your house, or in the circuit box itself. The switch should be labeled “main” or something similar.

How It Works

Why do you need a circuit box? When an electrical device malfunctions, such as the motor in your freezer overheating, wires can get crossed, creating a huge spike in electric charge. That puts you at risk of overloading your electrical system, and unchecked overloads can cause lead excess heat stress on wires, or worse.

Fortunately, your circuit breakers are on the job. There is an electromagnet or bimetallic strip inside each breaker. If the current moving through the circuit gets too high the device flips a switch, disconnecting the circuit. No more electricity can flow to the part of your home where the problem is, so the danger is averted.

So if the power goes off in one part of your house but still works in the rest, a tripped circuit breaker is the most likely culprit. The switches in your electrical panel should be labeled; if not you can still tell which one got tripped, because it will be flipped part way toward the off position. Some switches also show red when they've been tripped.

How Do I Fix It?

All you have to do to restore power is flip the switch all the way to the off position, then back to on. If flipping the circuit back on doesn't solve the problem, it might be something more serious. In that case, it's time to call a licensed electrician.

Some newer circuit breakers have advanced features, such as the ability to detect when a person makes contact with a live wire and automatically cut off the current, potentially preventing injury or death by electrocution.

If you live in an older home you may still have a fuse box. It operates on the same principle as a circuit box, with one major difference -- the wire inside the fuse actually burns up if too much current passes through it, so if the fuse blows, you need to replace it. Most fuse-style panel are maxed out, so if you have one it would be a good idea to consult your electrician and see if it’s time to consider a replacement.

Need Some Professional Guidance?

Your local Mister Sparky® electricians are always here to help. If you're having problems with your circuit breakers or fuse box, give us a call.

If you own a computer, then keeping it protected is one of your foremost concerns. There are a number of ways that you can achieve this, though electric can be rather vindictive when it puts its mind to it. As with anything, safety should be a priority, and a surge protector is a good first step to take in keeping your computer intact. The question you need to ask however, is what type of surge protection you would like to have for your computer. A UPS, or Uninterruptible Power Supply would be a great choice, and it has a number of benefits:

As the world becomes more and more reliant on computers, it becomes necessary to ensure our electronic lives are not tabled due to an outage. A UPS is not going to last forever, no doubt about that, but it will serve to get you through the worst of times. One of the most popular brands out there is APC, and you can find several others on the market to meet your growing needs.