Showing some love to your sweetheart this Valentine’s Day is a beautiful thing. Are you also showing that love to the electronics that keep things running smoothly in your home year-round? Much like your honey, ignoring those electronics for any length of time without giving them a little much-needed TLC could leave you in the doghouse.

Or your 2-year-old… Or your morning coffee… Or your dog. Your electronic devices need to be protected. Are they properly cased and safely stored?

Cleaning your electronics immediately is essential after unwanted exposures to items of all sorts, from your daily cola, food crumbs, dirt and grime, to a hosing from an over-friendly pet, and more. Don’t just grab a wet paper towel. Make certain to use compatible cleaning solutions and rags by making a worthwhile investment in specialized cleaning sets available for each of your sensitive devices. Here are some tips for properly cleaning and maintaining your electronic devices:

Recycle unnecessary or extraneous cords and chargers. Properly organize wires leading to electronics like televisions and DVD players, which are dust bunny magnets courtesy of static electricity. Untangle wires and straighten them together with zip ties to allow for easier cleaning and vacuuming without dislodging connections.

Opt for additional insurance or available protection plans that cover the parts and labor necessary to resurrect expensive devices.

Remove batteries from items you don’t use often to prevent damage from corrosion. Keep batteries on hand for items like remotes (which should also be cleaned) and store chargers carefully. Consider the addition of a professionally designed and installed charging station for the safety of sensitive portable electronics and to drastically cut the clutter.

Today’s expensive electronics and appliances are more sensitive to power spikes and surges than their predecessors. Keep them protected with whole house and point-of-use surge protection. The cost of replacing a single item destroyed by a surge will often cover your investment. Losing a single large home appliance will cost you double the investment of professionally installed surge protection from Mr. Electric®.

Ready to show the love? Contact Mr. Electric today.

The type of in-wall wiring and cables you choose for your home will largely depend on what kind of signal you need to carry, where you’re going to route the wire, and how far the signal will have to travel between your various peripherals. Whatever type of wiring you choose to go with, you want to be sure you get one that’s rated for in-wall use by the Underwriters Laboratory (UL). This is usually going to be indicated with a CL2 or CL3 rating when it comes to speaker wire and audio/video cables. A good number of Ethernet cables are rated for in-wall use as well, usually indicated with a CM, CMR, or CMP rating. When choosing the right rating for each specific type of wiring, the UL looks at a range of different factors, including the heat being generated from current flowing through the wire, how quickly the cable will catch and spread fire when exposed to flame, and the wire’s vulnerability to damage from external stresses.

It is also important to look for a cable that’s rated for your specific needs. For instance, you are going to want cable that is rated as CL2P or CL3P if you are planning to run it in your heating ducts, or if you are looking to run your cable underground to connect to your outdoor speakers, you will want to make sure your cable is rated for direct burial. It should also be noted that when you are making the decision of what custom wiring you will need for your home, you need to be aware of your local fire codes and make your selections accordingly.

When you are looking for the right type of speaker wire for your home, there are two things you need to factor into your decision: the gauge and number of conductors. The gauge of wiring you choose should depend on how far the wire is going to have to travel from the receiver to the speaker. Significant power loss can occur over long runs of wiring, reducing your system’s performance. This might not be a significant issue in a single-room setup, but it is something to keep in mind if you are looking at a multi-room system. In terms of conductors, speaker cable comes with two or four. Two should be all you need for wiring a single speaker, but if you are looking at doing a multi-room setup, or a system with volume controls, you will mostly likely want four.

No home wiring setup would be complete without a solid Ethernet setup, but knowing which type of wiring to use can be a little confusing. When you are looking to create a wired computer network in your home, or carrying audio/video and control signals all across the home, CAT-5 cables have been the standard for a long time, but a better option these days might be to look at CAT-5e or CAT-6 cables. These newer cables are able to pass more data along the wire at a much faster rate than the older wires. The CAT-5e and CAT-6 wiring options are also backwards compatible with devices that were designed to work with the older CAT-5 wiring, meaning you won’t have to buy all new equipment. Ethernet cabling actually stands up to interference better than almost all audio/visual cables, which is a large reason it has become so popular in recent years for whole-house audio/video systems. It can also be a more cost-effective option to run long lengths of Ethernet cabling than it can be to run the same length in audio/video cable.

You have probably heard about standby generators for homes. The generators are meant to keep a home powered during a power outage and have become quite popular over the years. More and more homeowners are making the investment to have a backup source of power as it becomes more obvious the power grid is not able to keep up with the demands. A generator installed by a Glendale electrician is an ideal option for those who rely on electricity and are not okay going without. Is your business any different? The team at The Electric Connection can help you add a safety net to your business operations with the installation of a standby generator.

When the power goes out, your business instantly starts losing money. If you can’t sell your wares or use computers to access accounts and meet deadlines, your business cannot function. There is no reason your business has to be vulnerable to power outages whether they are brief or extended. An electrician in Glendale can help you determine what your electric needs are and what size of generator you would need to stay up and running. You may need to scale back your operation, but you would still be able to have your doors open.

Having a generator for your business keeps your employees working and you are able to continue to serve your customers and clients. There is no need to be completely dependent on a shaky power grid. With a hot summer being predicted, there is a strong chance there will be rolling blackouts. Call an electrician. Glendale business owners need to start thinking about how they will keep their doors open this summer no matter how many power outages they are faced with. Give The Electric Connection a call today and talk with one of our professionals about a generator for your business.