Decorative LED path lights are the perfect gift for dads who want to add an upscale look to their yard. Shade styles include mushroom, frosted glass, offset cone, or hammered cone, and offset linear light heads are also available to direct illumination exactly where it’s needed. These LED path lights can be used for numerous applications, such as garden lights, patio lights, driveway lights, walkway lights, or sidewalk lights. The long-lasting fixtures emit up to 155 lumens of warm white illumination. They’re constructed of powder coated bronze or black aluminum and are weatherproof as well as rust resistant. Each path light comes with a screw-on ground stake.

This easy-to-install, low-profile light mounts directly to a junction box or in a can light housing. It’s perfect for low ceilings, basement, garage, hallway, closet, bathroom, workshop, and shed lighting. The long-lasting LED ceiling light consumes eight times less power than incandescent bulbs with equivalent output. It emits up to 1,100 lumens of natural white or warm white illumination and has a high color-rendering index (CRI) to show the true colors of objects and surroundings. A removable E26/E27 Edison screw base is included along with hardware for mounting to a junction box or in a can light housing.

Help him enhance the look of his boat while increasing nighttime visibility! LED underwater boat lights can be used as transom lights for colorful wakes, attracting fish, or for nighttime swimming and diving. Single-, double-, and triple-lens versions are available, and the underwater lights produce powerful red, green, blue, white, or RGB color-changing illumination. RGB underwater lights are capable of nine dynamic color-changing and single-color modes with an RGB controller and RF remote (sold separately). The LED lights are designed to last 42 times longer than underwater lights with incandescent bulbs.

As a homeowner, you might not be aware of all the features your home has, especially when it comes to your electrical system. It’s like another occupation trying to keep up with your home’s appliances and making sure everything works properly. One of the things, however, that is so important to take care of is your electrical system and the features that are involved or connected to it. Not only does it help to understand your electrical system and what it can do for you, but it will also help you become more efficient especially when you’re trying to save money on your utility bill. Keeping your family safe is also a necessity, so keep these electrical features in mind and know how to keep your home safe with your electrical system.

Once you understand your electrical system and know how it works, you’ll notice a host of beneficiaries. You’ll be increasing the safety of your home, especially when a small problem arises and you’ll know what to do in that place and time. Meanwhile, you will also know how to avoid any potential problems and end any lasting effects that can be damaging to your home. And on top of all these benefits, you will also decrease your monthly utility bills. What’s better than that? Knowing your electrical system allows you to understand what works efficiently and what doesn’t, which avoids the cost of wasted money in the long run. Lastly, you can make smarter energy consumption choices. You’ll be able to identify which habits work for you and your family and which ones are affecting your lifestyle and costing you more out of pocket expenses.

Regardless of bends, twists, or turns, Example of a cut line on LED strip lights

2. You will now have two LED strip lights. Carefully peel back the end portion of the paper strip covering the strip’s adhesive backing, and then remove the 3M VHB adhesive from the solder pads on the bottom side of one of the strips. The strip with its adhesive peeled back will be the top strip when soldered.

5. Align the non-tinned strip segment (strip with adhesive removed) directly over the newly tinned pads, and apply heat. Hold the soldering iron in place until the solder remelts and begins to flow. To strengthen the bond and improve visual appeal, a small portion of solder can be added to the top pad.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split and solder a run of non-weatherproof two-conductor or connecting wires. Peel away the blue wire so that only the positive (red), negative (black), and control (green) wires are left.

*No wires should be peeled away if you’re joining single-color or standard RGB light strips.

3. Properly heat your soldering iron. For best results, clean and tin the tip of the iron immediately before soldering. To tin the iron, touch solder to both sides of the iron’s tip.

4. Next you will need to tin the solder pads on both ends of the split strip light. When soldering, always apply heat to the target area on the strip and not directly to the solder. Once sufficient heat has been applied to the area, start introducing solder.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split, solder, and reseal a

3. Follow steps two through five located at the top of this post for soldering a standard RGB strip light.

4. To reseal the strip light, apply

The LED strip lights are now connected, and power should flow through the entire length of the weatherproof strip.

It may seem way too early to think about ice on your roof, but summer is coming to a close in less than a month, and the milder temperatures are the perfect time to think about servicing your HVAC system, doing preparedness tasks around the home, and yes, thinking about the possibility of ice and snow on your roof when winter comes around.

At FB Electrical, we’ve recently acquired a boom truck that allows us to effectively and efficiently perform many important electrical services—de-ice cable installation being one. There are many beneficial reasons to have these cables installed on your roof this fall. We’ve shared a few below.

As you are likely aware, when water gets into a space and then freezes, it expands. Then when it melts, it takes up less space. As a result, it can leave cracks and breaks on your roof. If your roof is kept warm all winter however, then this freeze-thaw cycle may never happen.

When water sticks around your home for too long—be it at your foundation, on your roof, or in your attic—then mold and mildew are encouraged to grow. Standing water can create additional property damage as well. De-ice cables allows ice to thaw and evaporate more quickly than it would otherwise.

There are potentially DIY tasks you can do to try to limit ice and water damage to your roof. However we don’t recommend them as they can be dangerous for the average homeowner. We have the tools and the expertise, in addition to the knowledge of water runoff patterns, to do the job right the first time.

Ice can easily crack or clog your gutters just as it can the shingles of your roof. Keep your gutters working effectively by helping them divert water away from your home as it melts due to the de-icing cables.