In our previous blog, the professionals at Electrical Gurus gave out some ways tips for increasing the safety of holiday decorations throughout the holiday season. Today, we’ll share even more ways to safely and effectively decorate your home this holiday season.

Even if the lights are unplugged when you’re hanging them (which is advised), be sure to never use nails, screws, or tacks to hang your Christmas lights; instead, opt for clips for interior and exterior applications. This will keep your wires from accidentally becoming nicked or frayed during or after the hanging process, which can get dangerous quickly.

Never use extension cords that don’t feature ground or are not rated for outdoor usage outdoors to avoid electrocution risk. Furthermore, it is especially advisable to only plug lights into GFCI outlets, especially if they are plugged into the exterior of your home. These outlets will essentially shut themselves off in the event of a short, which is crucial to avoiding safety concerns.

Always use timers for decorations and lights to prevent yourself from forgetting to turn them on or off. Lights should never be left on when nobody is home, which is why it is advisable to turn them off during daytime hours when the family is out-and-about. Timers keep your home safe by preventing power from flowing through the lights during the day, automatically activating them in the evening hours.

Large decorations, cords, and lights should all be kept well away from tripping hazards. Of special note is extension cords, which should never be allowed to cross walkways without proper coverage. Ideally, extension cords shouldn’t be run along open space in any way. If someone trips over one decoration, then odds are all attached decorations are at risk for getting dislodged or damaged.

If your home has the proper circuit breakers, there is little risk of a fire starting from overloading an outlet; that doesn’t mean it is wise to plug in numerous strands of lights into a single outlet. Spread the burden of lights and decorations across numerous breakers whenever possible to avoid taxing your electrical panel too much in certain areas. If your home is not equipped with a circuit breaker and still uses outdated fuses, please give us a call right away to talk about upgrading your panel.

We hope you’re safe this holiday season, but if you happen to overload your circuit breakers or have a concern about the lighting of your holiday decorations, be sure to give us a call right away. The electricians at Electrical Gurus want to help to keep every Des Moines family happy and healthy throughout the holiday season.

Every home has a fire detection system. This vital safety feature should be well understood. Smoke detectors, carbon monoxide detectors and security systems give homeowners peace-of-mind. Furthermore, when combined with a security system, these devices work together to form a complete home protection plan.

The second type of detector is an ionization detector. It uses a small amount of radioactive material to ionize the air in an internal chamber. This in turn, generates a voltage that can be measured. By-products of combustion will change the voltage that is generated and trigger the alarm. This type of detector is better at identifying active combustion with little to no smoke.

While both types of smoke detectors will safely alert a homeowner to a fire, combination alarms exist that employ both methods. Consequently, the responsiveness of the whole system increases. Hard-wired detectors are also available which can be wired to trigger all the alarms in a home if anyone detects a problem.

In any appliance that uses combustion, such as a furnace or stove top, a potential exists for hazardous carbon monoxide buildup. This by-product is tasteless, odorless, colorless, and highly toxic in large concentrations. Therefore, a carbon monoxide detector is highly recommended. It will monitor the levels of CO in the air and alert inhabitants before they become dangerous. They are available as stand-alone units that can be plugged in to standard wall outlets or as combination roof-mounted CO and smoke detectors.

Home security systems have been around for decades and make use of a combination of sensors including door, window, glass-break, and motion sensors. Historically, these devices were hard-wired and fed back to a central control panel. Many modern systems make use of wireless sensors that allow for easy retrofitting of existing homes. Door and window sensors utilize a small magnet and magnetic strip held open when the door or window closes. If the magnet is moved away, the magnetic strip springs closed and triggers the alarm.

Glass-break sensors are placed near windows and use a microphone to listen for the distinctive frequencies associated with glass breaking. Motion detectors take advantage of a variety of technologies, such as passive infrared, microwave, or ultrasonic. This technology detects something moving within its range. These can be part of exterior security lights or interior motion sensors. Security cameras can also play a role in home security. Install them indoors or outdoors.

When installed and used properly, a home security system can easily increase home safety while reducing the chances of burglary or fire. Most insurance companies offer discounts for home security systems. Because of this, the entire cost of the system may be offset or eliminated altogether. Be sure to ask your insurance company about discounts to homeowner’s insurance for improving or installing a new security system.

You may have heard the term GFCI from your electrician before. But what exactly does it mean? And is that type of outlet really necessary in your home or building?

We all know that water and electricity don’t mix. That’s what makes electrical outlets in kitchens, bathrooms, and other rooms where water is used so tricky. To reduce the chance of electrocutions, burns, and shocks, virtually all North American building codes require that ground fault circuit interrupter outlets (GFCIs) be installed where there is water nearby. GFCI outlets have a built-in circuit breaker that instantly stops the flow of electricity when it senses a surge.

A GFCI outlet not only helps keep you and your family or building occupants from getting shocks and burns, but it helps prevent electrical fires. In the even that there is an electrical fire, it can lessen the severity and any damage.

A GFCI outlet is important not only to meeting local building code requirements, but also to help prevent potentially-fatal accidents.

GFCI outlets are designed with a red button that activates the outlet after the built-in breaker is tripped, and a black button that tests the outlet to make sure that the breaker is working properly. The U.S. Consumer Product Safety Commission (CPSC) recommends that all ground-fault circuit interrupter outlets be tested in the following intervals:

To test your ground-fault circuit interrupter outlets, plug a lamp into the outlet. Turn the lamp on and push the black test button. If the lamp goes out, the outlet is working properly. If the lamp remains lit, contact a licensed electrician to evaluate the problem. Electrical and wiring issues make poor DIY projects and are best left to electricians who are trained to safely handle electrical current and wiring.

At Kolb Electric, we want to help you keep your home or building safe in the Maryland, Northern Virginia, and Washington, DC areas. We can save you time by inspecting and testing all of the ground-fault circuit interrupter outlets in your interior space and addressing any electrical issues we may discover during the tests. To learn more about electrical safety and GFCI outlets and/or to schedule a service appointment, call us at 877 287-1179. We’ve been helping Mid-Atlantic homeowners like you with their electrical needs since 1925.