When a fire breaks-out, most people just assume that it’s been caused by some inflammable substance. While that might be the case, it’s important to keep in mind that fires can also be caused by electricity. The one thing to keep in mind is that an electrical fire can’t be doused by water. Faulty or old electrical installations can lead to a fire and cause untold damage to life and property.

There are times when the electrical equipment or appliances in an electrical system can be the cause of overheating & overload, which can end up causing a fire. So, exactly what is it that causes an electrical fire? There are three main reasons, let’s take a detailed look at what these are and what can be done to prevent this from occurring:

Some properties have wiring that is decades old and electrical wires do tend to deteriorate with age. In fact, if the wiring in your house is over 15 years old, the recommendation is that you should get the entire property rewired. Older wiring wasn’t designed to bear the electricity load that current-day appliances demand. At times the electrical contractor might have cut corners and installed wiring of poor quality and this can lead to a similar problem, both of which can result in fires.

Arcing is quite a common problem with electrical wiring. As mentioned earlier, most homes have a range of heavy-duty electrical appliances. When you run a number of these appliances simultaneously in your home, it results in overloading and overheating of the wires. If the wiring is old, it will get heated up which will cause the insulation around it to melt – this results in arcing and an electrical fire may erupt too.

There are times when electrical wires are just too close to an external heat source which causes the outer insulating sheath of the wiring to melt. If this goes unnoticed, it can result in an arcing and fire.

Regardless of what has caused the electrical fire, if you attempt to contain it by pouring water on it that will escalate the issue. Water doesn’t have any effect on electrical fires; in fact, if you try to use water to douse an electrical fire, you can get electrocuted. What you need to deal with an electrical fire is a Class C fire extinguisher.

This type of extinguisher has dry chemicals that help contain the fire. Depending on how severe the fire is, it might be possible to completely bring it under control using a Class C fire extinguisher. If you don’t have this extinguisher, baking soda might help to some extent.

In case there is a break-out of fire on your property, the first thing you should do is switch off the power-mains; this is effective in containing the fire. Ideally every home and commercial establishment should have a Class C fire extinguisher or two, based on the size of the property and that should be used in case of any fire in the electrical wiring. An electrical fire is an electrical emergency and it’s crucial that you keep the number of a local, reliable electrician handy.

Never try to fix any electrical issues on your own. That can only lead to more complications and will compromise the safety of your property. We at Allround Electrical can rectify all types of electrical faults and we provide a range of electrical services. For more information, contact our friendly team today at this number – 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

At times, building codes can seem like a hassle that only create more work. But the truth is that these codes are put into place to keep us safe. Just like how a poorly formed foundation can cause massive damage to your home, cutting corners in electrical wiring could cost you your entire house. Whether you’ve purchased a new home, are trying to sell your existing home, or you just don’t know, its a good idea to bring your home up to the electrical code.

The best way to start bringing your home up to code is to target critical areas. These are places that see heavy electrical usage and potentially hazardous situations. Areas such as bathrooms and kitchen are very important to have up to standards. In the bathroom moisture can eat corrode wires and outlets which can cause electrocution. The kitchen also uses the largest, energy using appliances in your home. These outlets should be safe and grounded; if they are not, it can cause fatal injury.

In addition to these locations, there are several other places that should be targeted:

The best way to ensure that your home is up to code is to have a home inspection by a professional. With the long list of potential problems, only a professional can identify the work that needs to be completed. Especially when buying and selling a home, it is important to bring it up to code.

New rules will soon be in place to govern fossil fuel usage and cut carbon pollution coming from America's power plants. The Environmental Protection Agency proposed the plan last year, and it is expected to be finalized this summer. Most of the rules have to do with the generation of electricity, so it might not be obvious that the plan would have implications for the average consumer. As it turns out, the EPA plan could make a big difference in homeowners' utility bills – hopefully a positive one.

Reduction in Energy Bills

While many people fear that new clean energy rules will cause the retail price of electricity to skyrocket, experts are predicting otherwise. According to an analysis by the National Resources Defense Council, low and fixed-income households should actually see their utility bills fall by an average of 8 percent. In total, the group suggests that consumers could save as much as $37.4 billion on their electricity bills by 2020.

Why such a rosy picture? As the nation switches to more sustainable energy sources like wind, the costs of production will fall. Furthermore, since the fuel price for wind and solar is zero, consumers will be shielded from volatile prices of coal and natural gas, which can make electricity bills vary widely. What's more, the Clean Power Plan will promote investment in household energy efficiency to encourage families to reduce their own consumption.

A Boost to the Economy

Some think tanks are also predicting a boost to the economy as we transition to a cleaner energy grid, with jobs available to build and maintain the emerging infrastructure. People will be needed to work on windmills and solar installations, for example.

"The most important takeaway from our analysis is that, after accounting for the various ways in which the Clean Power Plan puts upward and downward pressure on employment, we find a net increase in jobs,” Industrial Economics Principal Jason Price said to UtilityDrive.com, forecasting a net gain of 74,000 jobs in 2020 and as many as 273,000 jobs by 2040.

Health and Climate Concerns

There should also be ancillary benefits to the EPA plan. Cutting down on fossil fuel emissions means less pollution in the air near ground level, too, so people should suffer from fewer related health problems. NRDC predicts that the change will prevent up to 6,600 premature deaths, 150,000 asthma attacks in children and 3,300 heart attacks.

In addition, the less carbon the nation burns, the less we accelerate climate change, which is poised to cause unpredictable but inevitably expensive disruptions in familiar weather patterns.

All in all, nobody knows for sure what will happen with the new EPA rules, since they haven't been finalized yet. However, if the experts' predictions are anywhere close to reality, Americans will be able to celebrate cheaper and more environmentally-friendly energy in the not-too-distant future.