Gas prices are fabulous—right now. We all know it is only a matter of time before the gas prices creep back up and we will once again be forced to pull from other areas of our monthly budget to afford to drive our vehicles. Many people have already made the switch to electric cars in an attempt to save money on their gas bills while reducing the strain on natural resources. There are plenty of different models of electric cars available that are sure to suit your needs. When you make an electric car purchase, you will likely also buy a charging station for you car. An electrician in Pasadena has some vital information for you. The team at The Electric Connection can also help answer questions about the electrical requirements of your electric car charging station.

When you buy your car, you will have the choice to buy a Level I or a Level II charging station. A Level I station is essentially a trickle charger. It sends a small charge to your car and can take upwards of 24 hours to fully charge the car. This charging station can be plugged into a standard outlet. However, it will need to be the only item plugged into that outlet and should be on its own breaker. If you need additional outlets or breakers, your electrician can take care of that for you.

A Level II charger is a fast charging system that typically fully charges a car in about 8 hours. This charging station requires a 240-volt outlet, which is not standard in your garage. It is a special outlet that will require installation by an electrician experienced with Pasadena electrical requirements. An inspection of your breaker panel will need to be conducted to make sure you have room for an additional breaker dedicated to your fast charging station. These are all things your electrician will evaluate on the first call. Give The Electric Connection a call today and schedule your consultation.

When working in an industrial environment you may have a variety of equipment pieces that are plugged into a standard electrical outlet. If this equipment vibrates, you may find that the cord eventually unplugs itself. In other situations, if the equipment is critical to operations and you find that it is being disconnected frequently it can interrupt the workflow. For these situations, a twist lock receptacle would be the ideal solution.

A normal three-prong outlet can simply be pushed or pulled to connect with a standard wall outlet. To add a layer of protection to this process, a twist lock receptacle requires that it be twisted in order to connect properly. The male connector usually has curved prongs that plug into the receptacle and then are twisted to lock into place. To unplug, the plug must be twisted the opposite direction. Without this process the electrical device cannot be disconnected from the wall.

A twist lock is beneficial in those environments where the electrical equipment is critical to operations, is semi-permanent, and should not be easily unplugged. This should not be used as a solution to prevent foot traffic disconnections. Others may continue to trip over the cord, which can damage the cord and create stress. This will expose the wires and create an electrical hazard. If the cord is a tripping hazard it should be rerouted or secured to the ground to prevent this from happening.

If a weather-resistant twist lock is chosen it can be useful when the receptacle is exposed to the elements. It can prevent water from entering the connection and causing electrical surges. The twist lock creates a tight connection and seal. The plug will not become loose and create exposure of the prongs and receptacle holes.

If you can think of a device in your home or workplace which is semi-permanent, will not or should not be unplugged easily, then a twist lock receptacle could be beneficial. This will require the male plug to be replaced on the electrical device and also the wall receptacle to be replaced. We highly recommend that a licenced electrician complete this replacement. A mistake in this task can cause damage to the device and constant electrical shortages or surges.

If you are interested in twist lock receptacles, contact Expert Electric at 604-681-8338. We can help you to determine if a twist lock is the ideal solution and help complete the installation properly and up to code.

We, of course, love lighting. Layers of light help to brighten any space, highlight certain aspects of a room, and help set the mood. Justin Krutz, a blogger for Palatin Remodeling, sent us this guest post with interior design decorating tips to help you brighten your home beyond just lighting. Thanks Justin!

We can always find ways to save a few extra dollars, but sometimes it can be little difficult to pinpoint exactly where those savings are to be had. You may look at the budget over and over and still keep coming up with the same bottom line. An electrician in Santa Monica can help you discover a few ways you could cut your electric bill without dramatically changing your lifestyle. If you ever have any questions or concerns about these tips, you can call The Electric Connection to ask more questions.

1-Get rid of any of those remaining incandescent light bulbs. They are costing you money. You can shave 20 percent off your electric bill simply by relying on CFL and LED bulbs that are much more energy efficient. They tend to be a bit brighter as well.

2-Have a ceiling fan installed in a central room of your house. This will help circulate hot and cold air produced by your furnace or air conditioner. Ceiling fans run on a fraction of the electricity of a heating or air conditioning unit. It is a good idea to have the fan installed by someone familiar with Santa Monica electrical codes.

3-Ask every member of the household to shave off 2 minutes from their average shower time. This can save a lot of money on your electric bill by reducing the demand put on the hot water heater. You could also turn down the thermostat of the water heater by about 5 to 10 degrees and save even more money.

4-Unplug any appliances, computers and electronics when they are not in use. When you leave for the day or go to bed at night, unplugging your electronics can save you money on wasted phantom power.

Give The Electric Connection a call today to have your ceiling fan installed or to learn more about energy savings.