There has been a sea change in electrical safety systems for residential and commercial properties and these systems are significantly safer than the ones that existed even up until 5 years ago. Even if you have new installations on your property, you need to make some effort to prevent electrical accidents.

This means you have to ensure that the electrical infrastructure in your home is of a high-grade and that it’s well-maintained. It’s also important to make smart choices with reference to using various heat-producing appliances and extension cords. Here are some tips that will help make your home a safer space:

Electrical safety is about ensuring that every fixture, fitting and installation is updated and in a good condition. The power points are one of the most important electrical components on your property. Since these are the ones you come in contact with very regularly, they do become worn and damaged sooner than the other parts of the system.

Since they are the points of contact for various electrical appliances in your home, there is also the possibility of sparking. This is how they become a very common source of residential electrical fires. If you have noticed consistent sparking from these points or if any of the wires appear to be damaged or loose, it’s important that you call in a licensed and reliable electrician to get these fixed.

It’s a good idea to get a full electrical audit of your property. The electricians will quickly identify whether there is any damaged, deteriorated or faulty electrical system that has the potential to cause a fire. If you find the circuit breakers on your property tripping too often, it could mean that circuit is unable to bear the load of the appliances that are operating on it. If this is left unattended, it too could pose a fire risk.

If you find that you are using too many heavy duty appliances like gas stoves, dryers, microwaves and dishwashers on the same circuit, it’s important to spread them across different circuits. Your electrician will be able to handle this job expertly and will provide advice on what the best option would be.

While power strips and extension cords may seem like a convenient solution, they should never be used a permanent option. Long-term use might be required in areas like entertainment rooms or for computer systems; however these should be checked with regularity and replaced at the first indication of a defect/damage. It’s also very important that you don’t overload the extension cords and power strips.

These appliances can also become the cause of an electrical fire. These can’t be strictly categorized as electrical fires; however, if there is any kind of combustible material in the vicinity of these appliances, the heat that emanates from the latter can ignite the materials and cause a fire.

As a thumb rule, it’s important to keep combustible materials away from all heat and electrical sources. For instance, if you use space heaters it’s important to follow the safety instructions mentioned by the manufacturer. Newer model space heaters have more reliable fire prevention features and its best to consider buying a new one.

We at Allround Electricals are a reliable company with years of experience behind us. Our experts can come and conduct audits and provide preventive electrical maintenance services for your commercial and residential property. For more information, contact our friendly team at this number – 1300 169 263. Alternatively, you can also write to us at this email address.

Thanks for reading,1300 169 263

With the cool nights upon us, you have probably pulled out the space heater already. Maybe you get chilled when you are at your desk or sitting in your favorite chair. Sometimes, you just need a little concentrated heat blowing on you to take that chill off. Space heaters are an excellent option when you need extra heat in a room or don’t want to turn on the furnace for a little bit. However, there are some things you should know about space heater safety. Your electrician in Pasadena has some tips to make sure you are using your space heater safely. If you have any more questions about what you should be doing, give The Electric Connection a call today.

Before you plug your heater in, give it a quick inspection. Make sure mice didn’t chew the cord while you had it stored away over the summer. Any type of damage to the cord is a problem that should be looked at by an electrician. Pasadena residents can skip the electrical repair and buy a new one, which is often more cost effective. Wrapping a damaged cord with electrical tape is not always a good idea. It is better to be safe than take chances.

When you are placing your heater for usage, make sure you leave at least 3 feet between the heater and any furniture, the walls or drapes. Run the cord along a wall and out of direct foot traffic. If you don’t have an outlet near the area you need the heater, consider having one installed by a Pasadena electrician. You can use an extension cord, but you will want to make sure the cord is not run across a pathway either. You don’t want the cord becoming loose and it possibly sparking against the carpet. Give The Electric Connection a call today if you need an outlet installed or have any additional questions.

This weekend many people around the country set their clocks back to adhere to daylight savings time (DST).     How did this tradition start, and why do we follow daylight savings time?

Although daylight savings has only been used for about 100 years, ancient civilizations had been known to use a similar system.  Ancient people would adjust their daily schedules to the sun’s schedule.  Benjamin Franklin is often credited with bringing daylight savings time into the modern limelight.  He suggested, in a essay, although jokingly, that Parisians could economize candle usage by getting people out of bed earlier in the morning, making use of the natural morning light instead.

Both George Vernon Hudson and William Willett had also suggested a system similar to daylight savings.  Both men suggested setting clocks either forward or back to coincide with daylight hours.  Willet actually suggested eight time changes a year moving clocks in 20 minute increments.  This plan was introduced to the British House of Commons in February 1908, with the first bill drafted in 1909, however, the idea was never made into a law.

Daylight Savings in Europe

Germany was the first country to implement DST in 1916 in an effort to save fuel for the war.  The innovative idea caught on and countries around the world used DST during the war, but many reverted back to standard time after WWI.  U.S. President Franklin D. Roosevelt instituted year-round DST in the United States, called “War Time” during World War II from February 9, 1942 to September 30, 1945.

Modern DST in the U.S.

In the United States, DST caused widespread confusion from 1945 to because states and localities were free to choose when and if they would observe DST.  In 1966 Congress passed into law the Uniform Time Act which stated DST would begin on the last Sunday of April and end on the last Sunday of October. However, states still had the ability to be exempt from DST by passing a local ordinance.

Daylight Saving today

The media room is perhaps the most lived-in area of your home.  Whether you are watching TV or reading a book, the lighting should be comfortable, energy-efficient and beautifying.  Tune in to a picture-perfect setting with lighting tips from Capitol Lighting’s professional consultants.

1. Track and Recessed:  General or ambient lighting is a must in any room, but it is especially important in a multi-functional space such as a den or media room where there will be a wide range of activities that call for specific light settings.  Overhead lighting should be installed as part of the initial room design.   Oftentimes, a standard grid lighting pattern does not work well with your seating and furniture layout, so it is best to draw up your lighting design in the initial stages of planning.

NOTE:  In general, recessed cans should be installed 30 inches away from the wall and 4-5 feet apart.

Track heads, recessed and/or rail lights should be strategically located so as not to create glare or cast unflattering shadows upon individuals in the room.

Rail lighting from WAC Lighting highlights artwork;  hanging pendants provide soft ambient illumination and artistic accent light.  Rail and track lighting are highly versatile and allow for easy adjustments if you decide to change your decor.

2. Wall Lighting: Wall lights work well in a media room as they expand the space and provide an evenly distributed balanced illumination.

Image from HGTV.com “Must-see Media Rooms”

“Jaxon” wall lighting from Troy Lighting, available in a variety of color options

3.  Portables:  From sturdy reading lamps to decorative table lamps, portables are a useful addition to the multifunctional media room.  They provide individualized task light, as well as general illumination throughout the room.

Room design by Sandra D’Amata International

Ambience table lamp (shown above), Frederick Cooper “Script Reader” floor lamp and Minka-Aire’s “Great Room” fan from Capitol Lighting

4. Control Systems:  Dimming and automated control systems are a must for the media room.  Even if you have programmed your lighting controls into your Smart phone, wall switches with a variety of room settings and dimming capabilities are a good idea and are available in a choice of colors to complement your rooms’s decor.

Dimmer switch from Kichler Lighting

5. Special Considerations:  LED bulbs and LED light fixtures are suitable for media room lighting designs, just be careful to choose all your light sources with the correct color rendering, color temperature and shielding. Look for LED light sources that are dimmable and in warm (2700K)  color temperatures. *

LED torchiere floor lamp from Holtkotter

* Solid State Lighting and LED light sources are being refined so that predictable color rendering and color temperature will be more visually accurate.  A new metric to measure LED illumination is in the works:  The Color Quality Scale (CQS) will help to identify the visual characteristics of LED light sources more clearly, but right now–a bit of trial and error may help you find LED light sources that are complementary to your media room’s decor.

3 Keys to Remember:

*  Avoid having sharp areas of contrast between dark and light–illumination should be evenly dispersed with slight variations that allow your eyes to transition from reading a book, conversing with friends or watching  TV.

* Make sure lighting/fan controls are easily accessible–opt for a remote control system in addition to wall switches.

* Go for the most energy-efficient light sources, but do not sacrifice the overall look of your room.   If you are not using fluorescent or LED light sources, opt for eco-halogen or top quality incandescent bulbs in portable light sources.