One of the most devastating things that can happen to your business is an extended loss of power. Without power, you lose valuable business hours and revenue. Business interruptions of this nature are not necessary though, even if it’s the result of a strong snowstorm.

Being well-equipped with a quality commercial generator is essential to keeping your business running effectively and efficiently during a severe power outage. Understandably, you may have questions before purchasing such a system. We’ve tackled a couple of our most frequently asked below.

Every commercial property is different, and therefore your needs will be different as well. Your generator will be sized on the electrical load that it will be tasked with carrying. The actual square footage of your building does not play a factor in this, as it would for an HVAC system or commercial water heater.

Your new generator must meet your specific requirements so that it’s able to do its job without accumulating undue stress on the unit or damage to the devices connected to it. Accurate sizing involves a number of factors and considerations, which our service professionals are happy to assist you with.

If your commercial generator is well-maintained and used properly, then it will run as long as fuel is being supplied to it. How often it needs to be refueled will depend on what type of tank you have. Some commercial generators are supplied with a 24-hour fuel tank, although 48-72 hour fuel tanks are also available.

Additionally, unless your business or commercial space deals with food that could spoil, it’s recommended that you turn your generator off during non-business hours so that the engine can cool. This is particularly helpful during long power outages as it helps your system avoid unnecessary wear and tear.

Many homeowners are DIY enthusiasts and will happily fix a broken chair or repaint the living room wall if they feel it’s looking dull and drab. If you are one of those people, you may also be tempted to fix electrical issues when something goes wrong. However, it’s important to keep in view the fact that electrical jobs aren’t for the DIYer. In fact, any electrical job, big or small should be tackled only by a licensed and insured electrician.

When you are working with electricity, safety is something you should never compromise on. It’s a fact that you would be able to handle some simple electrical jobs on your own and they may seem like a breeze, but the truth is that most people aren’t aware of the precautions they should be taking while tackling anything related to electricity.

When it comes to electrical jobs, there is no alternative to hiring an experienced and skilled professional for the job. Take a look at the 6 biggest domestic electrical mistakes novices make:

This is a very common mistake that many inexperienced people make. Every installation needs a different gauge (thickness) of wire. Using the incorrect one in a particular application can result in an overload or overheating in the wire; in turn, this can cause the circuit breaker or fuse to trip. It’s crucial that the wires be rated for the actual amperage they are going to carry.

It’s crucial that you never try to make any electrical connections outside electrical boxes. The sole purpose of these boxes is to ensure that the wires should be protected from external elements. If you do have to make an extension, use a plastic/metal box. Do not shove too many wires into one electrical box- this can lead to a short circuit.

There are times when you may not fix the switches and outlets firmly in the wall. These can be dangerous. When you attempt to fit appliances into an outlet that’s loosely fitted, the wires can come out of their terminals and can get overheated.

All the connections inside a fuse box should be correctly and tightly placed. Loose connections can cause flickering in lights and appliances. At times, it can lead to overheating of circuits too. It’s never a good idea to try to fix these yourself

Circuit breakers and fuses are the safety mechanisms that protect the wire ampacity ratings; they also control the flow of electricity to all the connected appliances. Many people are under the false impression that if a fuse blows or a circuit trips, they can simply replace it; and that the problem will be solved. In actuality, when either of these things happen repeatedly, it’s an indication that there is something wrong in the wiring connected to them. Call in a licensed electrician without delay and get the problem fixed.

This is another common electrical mistake. While many people simply buy adaptors and use them to plug in multiple appliances in at a single point, this only increases the amperage that the circuit can handle. This danger is compounded if you use more than one heavy-duty appliance at a single outlet.

Never take chances when you are dealing with electrical installations or are faced with electrical issues. Always call in a certified electrician to handle the job. For any type domestic electrical installations, call Allround Electrical at 1300 169 263. You can also drop us a line via email.

Thanks for reading,1300 169 263

Although the weather is still not exactly perfect for spending time outdoors, there is not time like the present to start getting ready for those outdoor get-togethers. As you sit outside and enjoy your patio this summer, things tend to get a little too hot for comfort on some of those hottest days. A cool breeze is always a welcome addition when you are sitting in the heat. An electrician in Pasadena is here to offer you a solution to your outdoor heat issues. You can rely on The Electric Connection to provide you with an electrician who is professional and able to take on the job.

An outdoor ceiling fan is an excellent way to keep the outdoor heat from becoming stifling. The fans are specially designed to be suitable for the outdoors without shorting out. There are a couple of different kinds of fans for you to choose from. The type you choose will depend on where you live and where you want to have the fan hanging.

There are fans designed to withstand the harsh, salty air for those who live very close to the ocean. The other two types of fans are wet fans that are designed to tolerate rain. This is the fan you will want to have your Pasadena electrician install if you plan on having the fan hang in an area that is exposed to the elements. If your fan will be placed in a covered deck, you can get away with a less-protected fan. You will need to have an electrician complete the wiring portion of the outdoor ceiling fan installation. A switch to turn the fan off and on can be included during the installation process if you choose. Give The Electric Connection a call today and schedule your appointment to have your fan installed.

video in which Kathleen Packard, their Healthcare Market Development Manager, discusses how some innovations in lighting can positively affect the healing process (and save energy and money). Packard describes hospitals as being historically “institutional and very uncomfortable,” and her mission is to educate the public on the “importance of design” to patient health.

intrinsically photosensitive retinal ganglion cell in the human eye, which senses light and regulates the body’s systems, including melatonin levels, which are directly related to sleep. Visa’s Amber Night Light, she says, creates ambient light that won’t disturb the intrinsically photosensitive retinal ganglion cell. This allows nurses to check on patients without disturbing their sleep.

Of course, all this valuable information leads us to the problems solved by Visa Lighting’s healthcare light fixtures. Packard calls special attention to the benefits of using LED fixtures. She reminds us that LEDs are indeed a great option for hospitals because they are energy efficient and therefore save money, reducing the cost of healthcare; they render color well, which is necessary, so that doctors and nurses can accurately assess skin pallor; and, unlike fluorescent lamps, LEDs contain no mercury.