Transforming a basement into livable space is a big deal. It requires a lot of planning, work and execution. If you have a basement, you have a lot of space down there that you could be using to entertain, as bedrooms or simply to add value to your home. When done correctly and up to code, your basement can count towards the total square footage of your home. Every additional square foot adds anywhere from $50 to $200 to your total value depending on where you live. An electrician in Glendale, like those at The Electric Connection, can help you get that remodel underway and up to code in no time.

Basements are generally already wired with electricity, but the lack of walls, ceiling and more than a cement floor are an issue. Once you add flooring and put in a ceiling, the ceiling height tends to be a bit smaller than the average. However, it is still functional and as long as it meets the building code, you can make it work. Now, basements tend to be dark, but you can change that with the installation of recessed lights by an electrician. Glendale homeowners will not have to worry about losing any head room with these lights because they are flush with the ceiling.

You can add several lights that will really brighten up the space. Whether you are transforming your basement into a den or the ultimate game room, you want to preserve as much ceiling space as possible while providing plenty of light. If you are dividing the area into separate rooms, your Glendale electrician can add the wiring needed for the outlets as well as the light switches needed to operate the lights in each space. A basement remodel is a fun project that is rewarding and will provide an excellent return on your investment. Give The Electric Connection a call today and schedule your lighting installation.

A safety switch is essentially a device that very quickly switches-off the electricity in case any electrical fault is detected. In effect, it reduces the risk of injury & death caused by contact with electricity. Current day safety switches are very different from the ones used even up until a decade ago. Today, it’s mandatory to have these installed in buildings where any kind of electrical addition or upgrade has taken place.

Apart from this, safety switches are also needed for power outlets that that supply electricity to mobile homes like caravans etc. It’s not mandatory to have these safety switches in older homes; however, the recommendation is that you should consider getting them installed. It is one of the most effective ways to protect your family & yourself from electric shock.

ELCBs or Earth-leakage circuit breakers are safety devices used to prevent shock in electrical fixtures which have high Earth impedance. The current installations use the circuit breakers that directly detect leakage in current. Here are some features of an ELCB:

RCDs or RCCBs are essentially modern electrical wiring devices which quickly disconnect a circuit if they detect that there is an imbalance in the current between the energized conductor/s & the return conductor. They are designed to immediately switch-off the electricity supply when the electricity leaking to earth is detected to be at harmful levels. These devices offer very high levels of protection from electric shock.

Voltage Earth-leakage circuit breakers were first introduced around 60 years ago, while the current ELCBs were launched only around 40 years ago. For a very long time, voltage-operated ELCBs & differential current-operated ELCBs were both called ELCBs; this was because it was a far easier term to remember. However, as expected, this common name caused a significant amount of confusion within the electrical industry.

If someone accidently used the wrong one in a particular application, the installations may not get the kind of protection it needed. It was to eliminate this confusion that the International Electrotechnical Commission decided that the differential current-operated ELCBs will be termed as RCD (residual current devices). Any current that’s over & above the load current is referred to as the residual current.

ELCBs have a number of disadvantages such as:

Today the RCD is preferred means of providing effective shock protection. The term is also most widely used across the globe.

For more information about RCDs and the best electrical solutions, call Allround Electrical at 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

Light dimmer switches are now common in most modern homes. Lighting affects the mood and comfort level of any given room. A bright halogen lamp just doesn’t help you wind down after a long day’s work, and a candle doesn’t work when you’re trying to make dinner. Dimmers can solve this problem.

If you use your dimmer often, however, you may notice it getting hot. Understandably, this can be disconcerting to a homeowner. If a dimmer gets too hot, it can actually melt the plastic plate or degrade  the electronic components.

Reasons for a Warm Dimmer

Basically, modern dimmers use a triac—a semiconductor—which works like a transistor. This allows the dimmer to control the amount of electricity going to your lights. This also means, however, that there will be a buildup of heat, which needs to be dissipated. A metal mounting plate is generally where the heat is distributed and then dissipated through the switch plate cover..

If your dimmer is running a single 100-watt bulb, you probably won’t notice any excess heat. However, if the wattage being controlled is in excess of  300 watts or more, you may start having issues. It’s not dangerous to run wattage that high (or higher), but you need to be using a system that is rated for that wattage, which is often not the case.

Dimmer ratings apply if the dimmer is mounted in a single gang box – meaning it is mounted alone.  If a dimmer is mounted in a box with other switches or dimmers, some of the heat fins must be removed resulting in a de- rating of its current carrying capability.

What You Can Do

First, you want to see if your dimmer switch is rated high enough for the amount of lighting it is running. You could also try using lower-wattage bulbs to reduce the overall amount of heat going through the switch.

In some cases, the actual casing and/or trim plate could be the culprit. Today, most electrical boxes are plastic, but metal is a much better conductor of heat. Changing from a plastic to a metal box will help, as well as replacing a plastic trim plate with a slightly larger metal one.

Dimmer Switch Help in Denver

Spirited lighting designs are trending toward the dark side, and that’s not just because it is Halloween.  Style spotters and top designers are embracing bold fashions and dramatic hues.  Take a look at the top three themes in the world of illumination…

1.  Deep, Dark Hues:  It is said to be a sign of the times that we are embracing rich, dark colors.  From politics to cultural rebirths, a positive vibe is in the air and we are changing it up with dramatic designs and darker hues.

“Momento De Mori” from Shannon Koszyk’s dramatic collection for Currey and Company features an Antique Nickel skull, black base and Inky Black parchment shade.

2.  A Cleaner Contemporary:   The ease of clean contemporary goes hand-in-hand with energy-efficiency and LED illumination.  From intricate geometric cutouts to textured Mercury glass compositions, the call for contemporary design has never been greater.

“Sovereign” table lamps from Dimond Lighting showcase Antique Mercury glass combined with energy-efficient LED illumination.

3.  Fearless Fashions and Surprise Twists:  Engaging new mediums run the gamut from natural palm leaf panels to a fusion of slate and metal.  Experimenting with hundreds of different textures, organic and synthetic materials, designers are coming up with new lamp shades, lamp bases and chandeliers that offer a magnificent blend of elements.  Novel lamp styles are making the A-list from designers who are not afraid to take a risk!

“Free Fall” from Kenroy Home introduces natural slate within a rugged iron lamp base for a statuesque presentation.

Lighting showrooms are abuzz with new lamps and chandeliers for the holiday season.  From High Point to Hong Kong, top lighting vendors are giving us plenty to celebrate.  Visit a Capitol Lighting showroom or 1800lighting.com to see the latest fixture fashions.