Generators make an important line of defense against natural disasters and power outages. With a generator, you don’t have to worry about keeping the food in your refrigerator cold, or powering your heating system when the temperatures drop. When installing a new generator, it’s important to select one that is the right size for your home. By size, we mean the power it’s capable of creating, not the physical size (though that can enter into the equation depending on where you plan to put it). In Lynnwood WA, electrical repair services can often advise you on how to size the right generator for your home, but it pays to know the basic before you give them a call.

The first step is to perform an energy audit for your home, determining how much power each appliance or electrical device uses, and then prioritizing them for use during an emergency. Medical devices usually come first on the list, followed by refrigerators and freezers which store your food. Next is your home HVAC system, followed by the lights in your home. Computers, radios and entertainment systems are usually on the bottom of the list: useful for keeping connected with the outside world, but otherwise non-essential in an emergency.

Once you have that list, you can determine two things: how much power is required to run your whole house and how much power is required to run the bare essentials during an emergency. The former number is preferable and if you can afford a generator of that size, then you should probably purchase it. The latter is less ideal but can do in a pinch if you’re on a budget and still want to keep your household running when the power goes out. In that case you need to carefully monitor which appliances are hooked up to the generator so you don’t overload it when the time comes.

Modern day living is highly reliant on the use of electricity and the different appliances, equipment and fixtures it powers. Industries are even more reliant on electricity and their profitability is closely knit with how seamlessly their systems operate. They rely on electricity to such an extent that they rarely give it a second thought; well, at least not until something goes wrong such as:

Most of these problems can be attributed to poor power factor. Let’s understand a little more about what that is.

Power factor is essentially a measure of how effectively the incoming power is being used by the electrical equipment on your premises. It is expressed in terms of a numerical value in the range of 0-1. A higher power factor indicates that the electrical equipment is being used more effectively.

For instance, if the power factor is 0.8, it indicates that 80% of the power supply to the equipment is being utilised effectively and that 20% is being wasted. Regardless of what this ratio of effective usage Vs wastage is, the latter is an unnecessary expense. Typically, your power factor should be closer to 1; it indicates that your site is using energy in an efficient manner.

A number of businesses are currently being charged a kVA tariff and not a kilowatt tariff. This means, your service provider is probably charging you for the power they supply to you, rather than that you actually use. Simply put, you are paying for power that is being supplied to you, but which is being wasted. If your business has a low power factor, it means you pay even more for this waste. There is another aspect you should keep in view. As mentioned at the start, poor power factor has the potential to cause power drops and power losses; in turn, these lead to motor failure and overheating and failure of other equipment too.

Installation of Power Factor Correction equipment might just help avoid prohibitively expensive infrastructure upgrades; it does this by reducing the current electrical demand on your system & improving the efficiency stability. Based on which tariff you are on, power correction might just prove to be an excellent way for your business to deescalate its electricity costs.

The power factor can be improved by installing Capacitor Banks. These are PFC (Power Factor Correction) equipment and help correct the inefficiencies in the energy supply. Apart from this, they also reduce the peak demand on the power network. This is an effective and cost-effective solution to reduce your power bill as it helps lower the monthly demand and the capacity charges. Generally, the payback periods for PFC are between 1 and 3 years. Taking the life span of the PFC equipment into consideration & the potential savings, this investment can prove to be very worthwhile for you.

If you feel that you are paying too much for electricity, we at Allround Electrical can conduct a survey of the equipment used on your site and map their electrical consumption against the power your plant is using and is being charged for. We will then provide you a report of what your power factor is; and if it is low, how it can be corrected. For more information, call us at 1300 169 263. You can also drop us a line via email.

Thanks for reading,1300 169 263

If you are big on decking your home out for the holidays, now is the time to start thinking about your holiday decorating needs. October through January is a big season for outdoor decorating. Going big with lots of lights, inflatable snowmen or a scary scene all require the services of an electrician in Pasadena. It can be a lot of fun to have the best decorated house on the block, but it requires a lot of electricity to run all of the lights, air machines and moving figures. The team at The Electric Connection is ready to help you get your home ready for the best holiday display on the block.

All of those lights require a lot of outlets. Running extension cords across the lawn can be a bit of an eyesore as well as a safety hazard. Extension cords can get damaged by heavy foot traffic or be tripped over. If you can avoid using a lot of extension cords, it is a good thing. Your Pasadena electrician can help you do just that by installing multiple outdoor outlets around the yard and the house. This will allow you to plug your lights and decorations directly into an outlet without worrying about an extension cord. It will look better and be safer.

For those who like to go big, you have probably run into tripping breakers when somebody in the house wanted to use the microwave or run the furnace. If you have to sit in the dark inside the house while your light display is running outside, you probably need to call an electrician. Pasadena homeowners who do elaborate light displays should consider having an additional panel or dedicated breaker to run the lights. This ensures your lights will always be on—inside and out. Give The Electric Connection a call today and schedule your holiday home lighting upgrade.

While it can be nice cuddle up once in a while in front of a roaring fire, any warm-and-fuzzy feelings quickly dissipate when your electric bill arrives. While your chimney lets smoke out, it also lets cold air in. So if you do want to use your fireplace, try and do so sparingly, and take the time to turn down the thermostat first.

It’s easy, affordable and a no-brainer – air leaks in windows, doors, plumbing and wiring let warm air out, but most of these problems can be easily fixed with a few minutes of time and a few dollars’ worth of materials. Apply caulking or weather-stripping material to windows and consider investing in a backdoor sweep if drafty doors are sucking the warmth from your home.

Halloween is a little over a week away, and whether you’re throwing or attending a party, taking your kids trick-or-treating, or getting your house ready for trick-or-treaters, it’s sure to be a night filled with endless fun – and scare. However, we want to help ensure that the kind of scare that may ensue is all in good fun, and not legitimate.  This is why we want to provide some helpful electrical safety tips to those planning on transporting party-goers or trick-or-treaters to another realm with their decorations.

Electrical cords in high-traffic areas can be dangerous as it can cause people walking over them to trip and get hurt. Furthermore, you should inspect your cords for exposed or frayed wiring. Wires that aren’t 100 percent intact increase the chances of electrocution and fire, so always err on the side of caution and replace cords that could pose a threat. While Halloween is intended to a night filled with surprises, but don’t let one of them be a trip to the emergency room.

To prevent guests from tripping over cords, consider purchasing cord covers or using duct tape. Your local hardware store should carry both of these.

Before hanging lights inside or outside, check the box to see that they are Underwriters Laboratory (UL) approved. This means they will have been tested and are completely safe to use. If lights are UL-approved and tested, you should easily be able to find the label on both the outside of the box as well as on the actual lights themselves.

Just like your electrical cords, you should always inspect your lights for frayed and exposed wiring as well as faulty plugs. If you do find that they’re not in good condition, the best thing to do is replace them. Continuing to use these lights will only increase the chance of electrocution and fire.

Don’t staple or nail electrical wires or cords because doing so could cause a malfunction in the system, sparks, or a fire. Furthermore, avoid attaching wires or cords to anything metal. Follow the directions closely to ensure safety.

Leaving for work? Going to bed? Don’t forget to unplug your lights and decorations! When you leave things plugged in for longer than they should be, you run the risk of having overworked bulbs and wiring, which could lead to a fire. By unplugging them, you can have peace of mind while you’re away, not to mention, you’ll save money on your utility bill!