A modern convenience often taken for granted, electric power, can be found everywhere. To route electricity from the power station to your wall outlet requires many steps. Residential house wiring includes a variety of wiring and control devices to ensure safe and reliable service.

Electricity in the home is distributed by means of branch circuits. Furthermore, each branch circuit is supplied via a circuit breaker sized per the expected load on the circuit. A typical lighting and receptacle circuit will be rated at 15A. Because of their size, larger loads like ovens, clothes dryers, and air conditioning units are given dedicated circuit breakers.

A typical home can have dozens of 15A circuits, and several 20A, 30A, or even 50A circuits. Yet the total of all these breakers is much more than the size of the main breaker. However, this is intentional. It’s highly unlikely that every circuit will be fully loaded at any one time, so a demand factor is taken into account to keep the main breaker at a reasonable size.

A wood-framed home will typically use solid copper non-metallic sheathed cable for the majority of wiring applications. Solid conductors are easy to terminate and cheaper than equivalent stranded wire. The AWG size of the wire is determined by the expected load on the circuit and by the size of the breaker protecting it. You should never connect a wire to a breaker that is too large to protect it, as an overloaded wire can easily catch fire.

Regardless of bends, twists, or turns, Example of a cut line on LED strip lights

2. You will now have two LED strip lights. Carefully peel back the end portion of the paper strip covering the strip’s adhesive backing, and then remove the 3M VHB adhesive from the solder pads on the bottom side of one of the strips. The strip with its adhesive peeled back will be the top strip when soldered.

5. Align the non-tinned strip segment (strip with adhesive removed) directly over the newly tinned pads, and apply heat. Hold the soldering iron in place until the solder remelts and begins to flow. To strengthen the bond and improve visual appeal, a small portion of solder can be added to the top pad.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split and solder a run of non-weatherproof two-conductor or connecting wires. Peel away the blue wire so that only the positive (red), negative (black), and control (green) wires are left.

*No wires should be peeled away if you’re joining single-color or standard RGB light strips.

3. Properly heat your soldering iron. For best results, clean and tin the tip of the iron immediately before soldering. To tin the iron, touch solder to both sides of the iron’s tip.

4. Next you will need to tin the solder pads on both ends of the split strip light. When soldering, always apply heat to the target area on the strip and not directly to the solder. Once sufficient heat has been applied to the area, start introducing solder.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split, solder, and reseal a

3. Follow steps two through five located at the top of this post for soldering a standard RGB strip light.

4. To reseal the strip light, apply

The LED strip lights are now connected, and power should flow through the entire length of the weatherproof strip.

 A properly sized and decoratively coordinated entryway foyer fixture provides an opulent and brilliant introduction with just the right lighting effects.

 Even if your home is not made of glass, fine lighting shines through more than any other home accessory or decorative feature.  An attractive foyer fixture creates a welcoming atmosphere, while emitting generous ambient light for greeting guests safely into your home.

It is important to size and install your foyer lantern properly to make the most of your lighting composition.

To determine how big your foyer lantern should be, you must know your ceiling height. The overall height of a foyer fixture should allow for a clearance of at least 7 feet from the floor.

In a two-story foyer, if there is a picture window above the front door, center the foyer lantern so it can be seen from outside. If the foyer is extra-large, wall sconces make a nice accompaniment to add depth and supply additional illumination.

The latest lighting trends feature oversized fixtures.  Make a grand statement with a large foyer lantern for superb upscale illumination.  Foyer lanterns from Savoy House Lighting are captivating and superbly crafted, featuring original style, timeless elegance, and designer authenticity.

With an elite team of designers, Savoy House continues to create sophisticated award-winning light fixtures. Artistic innovations include works by Karyl Pierce Paxton, Raymond Waites and Brian Thomas—artists who command attention and brilliantly define the next generation in home illumination and décor.

The design team at Savoy House has propelled home lighting and décor to new heights by creating and defining light fixture fashions and novel lighting compositions for over 46 years.

Check out the latest collections to revamp your home entryway and welcome the Summer Season.

Trends may come and go, but fine quality and classic finishes endure throughout the ages. Keep in fashion with the latest in home lighting and accessories.  Look to Savoy House when renovating or updating your home lighting design for light fixtures, lamps and decorative accessories that are steadfast, strong and enduringly beautiful.

It’s beginning to get dark earlier and earlier; depending on the month, after the autumnal equinox (September 22nd), we’re losing between 1-2.5 minutes of daylight each day leading to the winter solstice just before Christmas. This means that letting the dog out each night is going to require more and more squinting, taking out the trash becomes perilous, and dealing with evening snows becomes even more annoying. We at Electrical Gurus recommend you consider investing in exterior house wiring and backyard illumination now, while the temperature is still relatively warm and it isn’t yet dark before dinnertime.

By investing in backyard lighting, you stand to gain a large measure of safety for your family and guests alike. Motion-sensing backyard lighting can save you a sprained ankle, a fall on the ice, or even just a stubbed toe as you navigate your backyard space throughout the winter months. Year round, however, motion sensing light increases the safety of your home as a whole, as it can help to ward off intruders and invasive critters, such as raccoons, from nearing your home. While you will likely get the most use out of your exterior lights during the winter months, they are a great thing to have year round.

Its nice to watch the snow falling just outside the windows, as your family enjoys hot chocolate inside. By having lights for your outdoor space, you make the spectacle even better. It doesn’t always snow in Des Moines, surprisingly, and warmer winter days aren’t uncommon; these warm winter days should be taken advantage of, which is hard to do if it is dark at 5pm. With easily accessible outdoor lighting, your family can enjoy outdoor living areas, you can dust off the grill for a winter burger, and open up possibilities for a nice fire on a brisk night.

Investing in pleasant-looking lighting is a great way to add value to your home, especially in winter months. Nothing takes a home from looking plain to extraordinary in the evening hours quicker than some well-placed lighting. Whether you utilize uplighting to illuminate trees or your home’s exterior or landscaping lights to illuminate the lawn, these lights provide utility and bring value to your home. Exterior lighting can take your home to the next level of visual appeal, but does require help from a skilled electrician to do well. Get in touch with us today to learn what it will take to get your home’s exterior looking great at all hours.

Regardless of what you’re looking to gain by lighting up your home’s exterior, be sure to call Electrical Gurus for help with your electrical installation. Our highly-qualified electricians are happy to offer their experience in helping Des Moines homeowners with with internal and exterior electrical services. If you partner with our expert electricians, adding some lighting to your home’s exterior can increase its safety, usability, and give you a large boost to curb appeal.

Get in touch with our Des Moines electricians today!