Did you know roughly 1/4 of your electricity bill is used specifically for lighting? With recent changes in lighting technology, we now have the ability to control the costs of our electricity consumption more effectively. Choosing the right light bulbs for your home or business may be confusing with all the different options we have today, so we’ve listed the three most common types in hopes to shed some light on the issue.

Incandescent Bulbs

Incandescent bulbs, the oldest and most common bulbs on the market, are relatively inefficient compared to other bulbs. They work by connecting an electric current that travels through a wire filament, heating up the filament until it illuminates. Unfortunately, up to 90% of the actual energy it consumes produces heat. The cost of each bulb is the lowest compared to other bulb types, but their lifespan is also the shortest, as they only last up to 2 years (based off 3 hours of use / day). With the passing of the Energy Independence and Security Act of 2007, manufacturers are working to produce more efficient incandescent bulbs that produce up to 25% less energy.

Compact Fluorescent Lamps (CFLs)

Distinctive by their bold designs, Compact Fluorescent Lamps (CFLs) are the most energy and cost effective bulb type on the market today. An electric current is driven through a tube containing argon, and a small amount of mercury vapor that triggers the actual illumination. CFLs use up to 75% less energy than traditional incandescent bulbs, cutting overall electricity costs significantly without producing excess heat. Their lifespan can be pushed up to 9 years, and technically pay for themselves after just 9 months of use, costing less than half as incandesces bulbs for the same amount of light.

Note: research has shown that CFL’s work best when left on for long periods of time, but lose efficiency when turned on and off regularly.  Because of this, it may be best not to use CFL light bulbs in areas like closets where the lights are usually just flipped on then off.

Light Emitting Diodes (LED)

Making an appearance in electronics starting in 1962, Light-Emitting Diodes (LEDs), are rapidly taking the lighting industry by storm with its highly effective technology. By connecting a diode to an electrical current, electrodes are triggered within the diode, forcing them to release photons, which we see as light. The up-front costs of LEDs are higher compared to other bulb-types, but ultimately they last up to 25% longer than traditional incandescent bulbs. Manufacturing has increased drastically in recent years, and companies are expected to offer more affordability in the near future. By reducing energy consumption by up to 80%, LEDs pave a direct path to lower electricity bills.

There’s certainly a lot to be enjoyed about a Florida winter season. The mild weather, the festivities—it’s all quite nice. But just because the season brings some advantages doesn’t mean you have nothing to be concerned about regarding your home’s electrical! There are some challenges unique to this time of the year, and at Hoffman Electrical, our team is dedicated to ensuring you’re completely prepared.

As summer comes to an end, so do those long days and short nights. Now, when you head to work in the morning or the kids go off to school, there is a pretty good chance the sun is just barely breaking the horizon. Although we move are clocks back to make the best of the short winter days, it isn’t enough and we need extra security lighting to make sure we are coming and going with plenty of light brightening our paths. A Burbank electrician can help you enhance the safety of your family’s comings and goings by installing security lights. The Electric Connection has a team of qualified electricians to make this happen.

You have several choices when it comes to picking the right security lighting for your home. Solar lighting is really not an ideal option for the short winter days. While it works great for summer nights, you will want to have something a little more reliable. Electric pathway lights are perfect for illuminating the path between the door and driveway and can be set up on a timer to come on when you need them. Another option is the mounted security light. This can be put up to illuminate a driveway, the pathway to the door or a dark area in your landscaping. This particular type of light is much brighter and can spread light over a large area.

These will need to be installed by an electrician. Burbank homeowners can choose to have these lights on a timer, a manual switch or the common motion-detector system. The timers and motion-detection systems are a little more energy efficient and prevent the light remaining on when it isn’t needed. If you would like to learn more about your options for security lighting, give The Electric Connection a call today.

We realize there are a lot of different Des Moines electricians.  However, we want you to understand what sets us apart.  Our electricians can give you an upfront price right on the job site.  That way you know exactly what the job will cost before the work begins.  We give you a set price to work within your budget so you have peace of mind.  If the job takes longer than expected it will be no additional cost for you.  When our electricians arrive at your home they will greet you with a warm smile and friendly handshake.  They are professional and courteous every step of the way.  We always work to State and National Electrical Codes so you know the job will be completed to code. Our staff is familiar with the Des Moines electrical inspectors and have a quality relationship with them built on trust and professionalism.

Is your home or property not up to code?  Give us a call and we can help.  One of our professionals can perform a minimum code update or rewire your entire home.  We can add new circuits, dedicated circuits, GFCI installations, ground an outlet, and much much more.  Maybe you want something more aesthetic?  We install LED under cabinet lighting in a home virtual everyday.  This task is a highly requested item.  We also add recessed lighting.  Recessed lighting can add general illumination or accent a wall or nich.

Have a rental property in Des Moines?  Our company handles a lot of calls for landlords needing electrical items brought up to code or repaired.  Our certified electricians are on call offering 24 hour servicing for those unexpected emergencies. We can perform a code update, panel replacement, ground an outlet, or rewire your property.  No job is to big or to small.

When you’re purchasing LED strip lights, there are numerous details and specifications upon which to base your decision. Color, length, and intensity are some of the major deciding factors, but there are many unthought-of product aspects that further customize light strips and what they’ll require when it’s time to install them. For example, a decision between 24-volt strip lights could change the products needed for your project.

While it depends on a light strip’s current draw, LED type, and number of LEDs, 24-volt LED strip lights tend to have longer maximum runs than 12-volt strips. This is because higher voltage carries more power. All strips have a maximum run, which is the length of continuous strip that can be powered without experiencing voltage drop. Voltage drop happens when the supplied energy of a power source is reduced as electric current flows through wire (or any other pieces of equipment that do not supply voltage on a circuit). If a run of strip is too long, reduced energy across the strip will lessen its intensity near the end.

Because they can handle more power, many 24-volt LED strip lights tend to have brighter LEDs, dual-row LED configurations, or single-row configurations of more LEDs. In these instances, maximum run might be the same as a 12-volt strip. However, keep in mind that these are more powerful strips with more LEDs or higher LED intensities. An identical 12-volt LED strip light would have a shorter maximum run.

Make sure to check any light strip’s specifications or description for its maximum run.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.