Our dependence on electricity is truly astonishing. In every room of your home you’ll find multiple ways electricity is used that we often take for granted. If not handled with care, electricity can pose serious threats of electric shock and burn. One way that these types of accidents can occur is when babies and children are able to roam freely and get their hands on electrical devices. Consider ways of childproofing your house from potential electrical hazards before a serious accident occurs. Our well-trained team at Expert Electric has compiled a list of measures so that you can get started.

To identify any electrical hazards in your home, start by going room by room. For a more thorough approach, get down on your hands and knees to view the potential hazards from a child’s perspective. At this lower vantage point you are looking at all the electrical outlets, power strip bars and power cords. Be sure to look behind furniture and up on any side tables, dressers or counter tops. Make a list of electrical hazards that you have identified and get to work addressing those issues.

Childproofing your electrical outlets will be one of the most basic and simplest solutions. There are usually multiple outlets in each room and they seem to be attracted to them. Outlets are very tempting little spots on the wall for children to stick random objects into. To prevent this dangerous behavior from happening, install electrical outlet caps or safety plates over the top of unused outlets. This will block children from sticking their fingers and other items into the holes, which can cause the electrical current from flowing to the child. All unused outlets that are accessible to children should be covered.

Power bars are commonly used around the home to power numerous electrical devices located in the same room, such as a television system or computer setup. In these areas, multiple cords are often found tangled up in a pile and are all plugged into one power strip on the floor or in a cabinet. Childproofing a power strip can easily be done to protect your child from dangerous electrical shock or burn. Purchase and install power strip covers on child-accessible power bars. These covers wrap around the power bar and have a hole for the cords to exit. This helps to prevent children from tampering with and pulling out cords. At times gaps may occur in the covers hole, duct tape these areas to prevent little fingers from entering into the cover.

Securing electrical cords will be an important safety measure. If a child can pull on an electrical cord to dislodge the prongs it can create an opportunity for electrical shock. Alternatively, the connected electrical device could fall down due to the tugging and cause an injury to the child’s head. Secure these types of hazards by tucking electrical cables safely out of reach or plugging them in different areas of the room not accessible to children. If the cords are too long, shorten them by rolling up the cord into your hand and tying with a zip tie. Any cords that run along the floor can be a tripping hazard and should be secured with strong tape or a rubber cord cover that can be purchased in any length.

We want to help you have piece of mind about your home and rest easy knowing you’re safe from electrical accidents. For more ideas or questions that you have regarding childproofing your home for electrical hazards, contact our trained and courteous technicians at Expert Electric. Call us today at 604-681-8338.

Home automation is the latest trend in electrical installations; it allows you the functionality to control various devices in your home, via a mobile device from any location (in your city or even from across the world). It’s true that the term home automation could be used for various programmable devices such as sprinkler systems and thermostats.

However, home automation is much more than that, and it encompasses a number of things in a home including:

All of these are connected to a network that can be remotely controlled. From the perspective of home security, this includes fixtures such as the alarm system in your home, as well as the windows, doors, smoke detectors, locks, the CCTV cameras as well as the other sensors that are connected to it.

Even up until the recent past, it was only commercial systems and high-end homes that had automated centrally-controlled systems. Typically, these included only the heating & cooling systems, lighting systems and they hardly ever provided anything more than just the standard controls, monitoring functions as well as scheduling actions. In addition, these were accessible only from certain control points from within the very same building.

While this was a definite convenience and advantage, home automation takes this concept and technology one step further; and is popularly called the – ‘ Internet of Things’. In this type of system, everything has a specific IP address that can be accessed and monitored remotely.

Smart devices and various smart appliances are the most obvious things that get connected to the LAN via Wi-Fi or Ethernet. However, it’s possible to incorporate electrical outlets and light switches into your home automation network.

In addition to the convenience factor, the energy efficiency factor is what makes home automation such an attractive option. While modern appliances provide convenience and comfort, many of them are also power guzzlers; home automation systems also address this issue. Thermostats help monitor the heating and cooling system in your home; similarly the lighting systems can also be programmed and set for various target temperatures.

This helps keep energy usage at the minimum levels during the times when you aren’t really going to be using them. In fact this scheduling can be broken down at a more micro level to distinguish between the seasons of the year and the weekends etc., in some instances. If required, ‘macros’ can also be programmed into the system and these can be controlled remotely as required.

In fact, you can add settings – like “coming home” etc. that can activate various appliances, equipment and installations at the tap of your smartphone and you can have the opposite set as a “leaving home’ event. This ensures you use only as much energy as required, which adds to the overall energy efficiency of your home.

If you are considering getting smart automation solutions for your home, it’s important that you get experienced and credible electricians to handle the job for you. We at Allround Electricals are a company that has been operating in this space for a number of years and know what it takes to provide our customers with the kind of solutions they need.

For any more information about home automation or simply speak with the experts at our company. You can take our advice on various aspects of electrical and wiring installations. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

Since electrical work isn’t for amateurs, many homeowners don’t know much about the electrical systems in their homes. With all the wiring hidden behind the walls, it may be that all you know is what you learned in your pre-sale inspection -- if you remember, that is.

When it comes to electrical infrastructure, one attribute that sets homes apart is the type of wiring in the walls. And for several decades’ worth of older homes, that type is old-fashioned knob and tube wiring.

What Is Knob and Tube?

Knob and tube wiring dates all the way back to the 1880s, but it was still in widespread use as recently as the 1950s. For most of its heyday, it was the most economical choice for wiring a new home, both in terms of installation and cost of materials. But by the 50s, mass production of modern electrical cables offered a cheaper, safer alternative.

This type of wiring consists of two wires -- a hot wire and a neutral wire -- strung within walls and above ceilings using porcelain knobs and tubes. The tubes provided a safe place to run wires through studs and joists, and the knobs supported the wires and made it easy to wrap them around corners.

The wires are protected with sheaths. In the early days, these were made of treated cloth, but electricians eventually switched to rubber. Neither material was designed to last forever.

Is it Safe?

Electrical code prohibits the use of knob and tube wiring in most new construction, and homeowners insurance companies often won’t insure homes until they’ve replaced these systems. While it’s true that it’s not the safest choice, knob and tube wiring can still be used safely, but with limitations and special precautions.

One thing knob and tube wiring still does well is release heat. Because the wires are spread out and suspended in air, there’s lots of room for electrical heat to dissipate, which is good for energy efficiency and the wiring itself. But that also means knob and tube wiring can endanger flammable materials like insulation.

To safely use this wiring in any structure, you must be certain that all wiring is clear of flammable materials and that the system is well maintained.

What About Limitations?

Another risk with knob and tube wiring is that there’s no ground wire, which increases the possibility of electrical shock. It also means you can’t use any electronics or appliances with a three-prong plug, as the third prong connects to the ground wire. This inconvenience is often what motivates homeowners to upgrade.

But even where knob and tube can be made to work, homeowners may want to expand that system to other areas of the home. This often means splicing new wiring and fixtures into the existing system, which can lead to overloaded fuses.

A dangerous mistake is to simply upgrade the fuses when this happens. This will get the juice flowing again, but the wiring can get dangerously hot, and the protective sheaths may have deteriorated over their decades of service. It’s a fire waiting to ignite.

Stay Safe

If your home still has knob and tube, it’s important to have it periodically inspected. Even if it’s deemed safe, there’s no substitute for the safety and convenience of modern wiring. And if you’re not sure what kind of wiring you have, just reach out to your local, licensed electricians for a quick inspection!

It can be extremely frustrating to rearrange your home based on where your outlets are. Trying to strategically place furniture so you don’t block outlets is futile. This applies to your kitchen as well. Maybe you have to unplug the toaster to plug in the coffee maker. There never seems to be enough outlets. It isn’t safe to run electrical cords all over your home and it is certainly not attractive. So what can you do?

Well, you can move, which is probably not really feasible nor is it a very good idea to put your home on the market because you don’t have anywhere to plug in your coffeemaker. Before you make any rash decisions, call an electrician. Glendale homeowners do not despair! Call The Electric Connection to help solve your outlet shortage.

You will likely need an electrical inspection to determine whether your home can support more outlets or if you will need a panel upgrade. Don’t worry about trying to determine this yourself. This is what your electrician is there for. If an upgrade is needed, this is a task a qualified professional can handle for you.

In some cases, you may want to upgrade your outlets. This is a really good option for people who own older homes and the wiring may be fraying or outdated. You can have an inspection to determine whether or not you need a whole-home upgrade completed by an electrician. Glendale homeowners will want to ensure their home is safe and this is one way to do that. During the assessment, you can talk with the electrician about adding outlets.

We all rely on power, and we want it where we can get to it safely and easily. Because of the safety hazards associated with electricity, you will want to leave this job to the professionals at The Electric Connection. We’re ready to serve you!

While it can be nice cuddle up once in a while in front of a roaring fire, any warm-and-fuzzy feelings quickly dissipate when your electric bill arrives. While your chimney lets smoke out, it also lets cold air in. So if you do want to use your fireplace, try and do so sparingly, and take the time to turn down the thermostat first.

It’s easy, affordable and a no-brainer – air leaks in windows, doors, plumbing and wiring let warm air out, but most of these problems can be easily fixed with a few minutes of time and a few dollars’ worth of materials. Apply caulking or weather-stripping material to windows and consider investing in a backdoor sweep if drafty doors are sucking the warmth from your home.