Many would argue that Christmas lights and decorations are one of the most enjoyable aspects of the holiday season; one can’t help but “ooh” and “aah” at all the dazzling lights and angelic sceneries.  In fact, a testament to this is the popular tradition of driving around neighborhoods at night just to see all the different displays homeowners have put up.

When it comes to Christmas lighting and decorations, the possibilities are nearly endless. Whether you decide to go with blown-up animated cartoons such as Frosty and Rudolph, lighted Santa sculptures, pathway lights, or hanging lights such as icicle or snowflake, we guarantee your home will be a beautiful masterpiece by the end of it.

While lighting and decorations are a great way to illuminate your holiday spirit, it’s important to follow safety guidelines to ensure your family and home remain safe.  Homeowners use exponentially more electricity this time of year, which can make way for electrical hazards. Make sure to follow these Christmas tips from the Electrical Safety Foundation International (ESFI).

Once you have decided on using prefabs, the best approach starts with an honest assessment of available skills, facilities and tools. In addition, the contractor will have to decide on whether to carry out the prefab work in-house. Other options include a third party’s workshop.

If lacking in the required skills or other requirements, the contractor will have to either train or hire the right staff and acquire all the tools for implementing the project to completion. All these costs will affect profitability and should be considered.

Clear communication before and during the construction phase is essential for the success of prefabrication. The contractor should coordinate with building owner, suppliers, partners and contractors in other fields.  This ensures a smooth project flow. It should be simple to make adjustments as needed.

For the prefab process to succeed, the contractor should pay attention to the following:

Many modern American homes were constructed significantly before many modern Americans were born. We have homes that have been around since the Victorian Era and before, with all that that implies. Many houses are rife with out of date, unsafe electrical wiring, insufficient or toxic insulation, or other structural problems best corrected for the health and safety of anyone currently living there. Flicking on and off the light switches is nowhere near sufficient as a way to test the efficacy of any home’s electrical wiring. The intricacies of electricity extend further than simple functionality.

Before the 1940s, electricity was often done in a knob and tube wiring style that is currently vastly out of date. People should not assume that previous tenants or homeowners updated their electricity systems without inspections, since repairing knob and tube wiring was very expensive years ago. Knob and tube wiring is unsafe and prone to problems, but it is also highly inconvenient. Home inspections and getting your home wiring checked can save families significant time, money, and heartache in the long run. People that live in houses constructed around or before the 1940s, and especially between 1880 and 1940, are strongly encouraged to get their homes inspected. Licensed electricians can tell you if the wiring in your home poses an increased risk of fire or electrocution on a large scale, or inefficiency and proneness to blackouts on a small scale.

Knob and tubing wiring was never fitted with a grounding conductor for safety back in the pre-War period. Knob and tubing wiring used to have advantages in terms of cost, but today, the price of labor tends to outstrip the cost of material. Many knob and tubing wiring systems do not have enough branch circuits to suit the needs of a typical modern household, and will strain to supply the necessary electrical load. The amount and intensity of electrical equipment required by an Information Age resident substantially outstrips anything the people of the 1940s could have expected. Knob and tubing wiring left over from decades previously may well have been damaged further by renovations over the years, wear and tear, and various household pests, which only increases the risk of problems.

There are very few situations where a knob and tubing wiring system is legally installed today, according to building codes. Insurance companies are increasingly denying coverage to homes that have not upgraded their wiring from knob and tube wiring to a more modern power cables system. Updating your home’s wiring can add a substantial amount of money to your resale value, so families will increase the value and safety of their homes by updating them to meet modern electricity specifications.

As a California homeowner, you know that this is not the best time to put your house on the market, which may be why so many people are opting to upgrade their existing homes instead of seeking a replacement. One of the improvements you should consider is an electrical make over.

Electrical wiring can suffer wear and tear, and older homes were simply not built to meet today’s electrical needs, but these deficiencies can be overcome by hiring an experienced electrician. Santa Monica, CA building codes have changed over the years as well, and companies like The Electric Connection that specialize in rewiring older homes can bring your house into compliance with the latest regulations.

If your home was built during the 1960s and 1970s, you may be living in a fire trap. During that time approximately 2 million homes were built or remodeled using aluminum wiring before it was discovered that this type of wiring poses a significant fire hazard. The problem occurs at the electrical connection points where the wiring is spliced to connect to a switch, outlet or circuit breaker. Aluminum expands and shrinks in response to temperature changes, a process which can cause breaks and frays over time. The US Consumer Product and Safety Commission (CPSC) has expressed grave concern over this issue stating that homes with aluminum wiring are up to 50 times more likely to have a fire than homes with copper wiring.

How will you know if you need to have all of the electrical wiring in your house replaced? Fortunately, you may not necessary need a complete rewire in your home or business. A licensed electrician in Santa Monica can evaluate this for you, and tell you to what extent you’ll need to go in order to make your home safe. The Electric Connection, which specializes in house rewires explains that depending on the situation, there might be a fairly inexpensive solution. For example, you may simply need to replace the connection points in your home or business with copper electrical connectors. Not every Santa Monica electrician is trained in this type of retrofit, so you when you’re searching for electrician Santa Monica, it’s important to find a highly trained and fully licensed electrician to perform aluminum-to-copper retrofits.

Older homes, those built prior to 1950, may have a different electrical safety issue. During this time many homes used cloth insulated wiring, something which can appear similar to the insulated wiring used today. The danger builds over time; as the cloth ages it dries and can begin to flake off. Once portions of the wire are exposed, they pose a serious shock and fire danger.

Another challenge presented in older homes or buildings with cloth insulated wiring is that this wiring was frequently not grounded. At the time there were a limited number of electrical appliances and no home computers, so grounding was not considered a serious issue. Today all new homes are grounded so that excess electrical charges caused by electric surges are routed out of the house and into the ground, protecting electronic devices, computers and appliances. An electrician from Santa Monica can replace cloth insulated wiring with a grounded system, making your home and belongings safe from electrical fire and damage caused by power surges.

Another problem with older homes is the lack of three-prong outlets, something that is necessary for most modern appliances. Many homeowners mistakenly think they can simply purchase the three-prong version at the hardware store and swap out their existing two-prong outlets, but doing so can create additional fire risks. Properly swapping out these outlets requires some rewiring so that the three-prong version is grounded. Your Santa Monica electrician can do these quickly and inexpensively for you, and can make certain that any existing three-prong versions have been installed properly.

So how do you determine what type of electrical wiring is in your Santa Monica CA home? The first step is to check the build date. If your home was built before 1950, you can call the Electric Connection for a free electrical estimate by a licensed Santa Monica Electrician. They will be able to quickly evaluate any electrical safety issues that you might have in your home or business electrical system.