Ceiling fans are becoming the new standard instead of the old globe lighting fixtures available in every room of every home. Fans offer an advantage of cutting energy costs by circulating air in the room and reducing the workload of your heating and air conditioning unit. Although you may choose a particular ceiling fan according to your budget and design preferences, it needs to be properly installed in order to assure it functions as it is supposed to and is a safe device to have in your home.

Licensed Electrician

A beautiful deck is something that should be enjoyed long after the sun goes down—which is why it’s important to have the right kind of deck lighting! From a purely functional point of view, deck lighting serves three purposes:

But when it comes to the right type of lighting for your home, deck lighting can do so much more! The key is to design a lighting system that performs all three of the above tasks while enhancing the look and feel of your deck. Rather than flooding the deck with simulated sunlight, integrate accent lighting with posts, railings, stair risers, and other elements to create an inviting after-dark atmosphere.

Low-voltage deck lights – the most common types of deck lights, low-voltage lights are a safer alternative to line-voltage, posing almost no risk of electric shock. Electrical connections with low voltage lights are simpler, requiring neither a permit nor a license to install.

Disadvantages of low-voltage deck lights are that they require a transformer, and unless they are divided into more than one run of wiring, they share the same 12V of power—which, if you have a lot of lights, can reduce the brightness.

Line-voltage deck lights – line voltage deck lights are brighter, but their installation is more strictly enforced. All connections must be made in an approved electrical box, and any cables run in the open must be enclosed in a proper conduit. Line-voltage deck lighting must be installed by a licensed electrician.

Solar-powered deck lights – because solar deck lights require no electrical connections, timers, or switches, you won’t need to drill routing holes, run wires, or make connections to install them. What you will need, of course, is steady sunshine—usually six hours per day, according to manufacturers. Sunlight charges the lights’ batteries, which mean they are typically limited to post-cap features, although lanterns, string lights, and recessed solar lights are available.

The solar batteries will need to be replaced every 500 charges or so, but fortunately doing so is fairly easy.

Once you’ve decided which type of deck lighting you want, it’s time to choose how you want that lighting installed. An ideal deck lighting design makes use of all three styles of lights: post-cap, side-mount, and recessed lights.

The largest and most prominent fixtures in the accent deck lighting category, post-cap lights sit at the top of your deck posts, usually at the top and bottom of staircases and at intermediate posts along the perimeter of the deck. Post-cap lights are available in a variety of colors and styles to match your deck, and most manufacturers make dummy post-caps, which are unlit and allow for some space between light sources.

Side-mount deck lights can be installed on the side of posts instead of the top. Side-mount lights can be beneficial if your posts come to eye level when guests are sitting down, as post-cap lights could shine light directly into peoples’ eyes.

Recessed deck lights are the perfect example of how to accent a deck without overlighting it. Recessed deck lights are installed in holes drilled in the stairs or the floor of your deck to provide lighting while being almost perfectly hidden during the day.

Incandescent Deck Lighting – incandescent bulbs are widely available in several different shapes and wattages, and because they are relatively inexpensive, replacement is quick and easy. They cast a softer, warmer glow than LEDs, but consume more energy, making them less efficient and shortening their lives.

LED Deck Lighting – because of the complex housing and circuitry involved, LED lights tend to be more expensive than incandescent lights. They tend to be more than worth the cost however, with vastly improved lifespans (10,000 to 100,000 hours) and high efficiency with almost no heat production. The trade-off is that unless mirrors or reflective surfaces are used, the light output is focused narrowly in only one direction and can be harsh on the eyes in contrast with a dark backyard.

The right type of lighting can make all the difference for your deck. For outdoor lighting installation in Maryland, Virginia, or Washington, DC, call Kolb Electric today!

If you are renovating or updating your kitchen, one common kitchen addition you might be interested is a garbage disposal unit. This little unit sits in your sink and allows you to shred food that you would not normally fit down the drain. This can be a handy appliance, however it may introduce the threat of electrocution into the environment, as water and electricity don’t mix well. If you are looking at having a garbage disposal unit installed in your sink, have one installed safely.

The garbage disposal unit is installed into your existing sink pipe. In order to power the unit, you will require a 120-volt GCFI (ground-fault circuit interrupter). This means that you will need an outlet under your sink to plugin into. If one is not available you will need to have it installed. Often, other appliances may already heavily load kitchen circuits, it is important to check the load on that circuit before installing a new electrical outlet. If you are not careful, every time you run your garbage disposal you could cause the breaker to trip and lose power to your toaster, microwave, or refrigerator.

At times disposal units may need maintenance, become clogged, or break down for some other reason. To identify the problem you may need to open up the sink or motor to get to the part that you need access to. Before you begin any work, shut down the circuit that the garbage disposal is on and unplug the unit. This will not only keep your fingers safe from the motor activating unexpectedly, but it will also help you avoid an electrical related accident. If you start to take apart the pipes and water begins leaking there is a big risk of electrical shock. If you are not familiar with the plumbing or electrical work of the garbage disposal, leave it to a professional. You may think it is a simple job, but one mistake can be costly.

Before having a new garbage disposal installed, inspect your sink and pipes for any leaks. If these leaks make contact with exposed electrical wires or outlets there is risk of electrical shock. If you are not familiar with the plumbing or electrical work involved in installing a garbage disposal unit, call an expert. Our licenced electricians can ensure that your kitchen circuit can handle the unit and install a new electrical outlet.

Cities like Colorado Springs, Denver, and Pueblo are constantly expanding and urbanizing—you can always spot a new neighborhood development on your commute to work. New homes are sprouting up all the time, and people are buying. However, sometimes new isn’t always better (or cheaper). There are a lot of great, older homes throughout Colorado cities, and are often a better choice when it comes to real-estate investments. If you currently own an older home, or you are considering purchasing an older home, you’re going to want to check for these common electrical problems that could cause issues in the future in terms of both safety and money.

Generally, homes that were built after 1940 are in the clear—they are usually safe and the electrical systems were installed up to code. Homes built prior to the 1940s should be evaluated, however, as many of the electrical wiring could have deteriorated or may not be able to power a home in this era of modern day technology and appliances. Regardless of when your home was built, it might be a good idea to have an electrician come out and evaluate the wiring systems in your home and ensure that your family will be safe. Here are some things that you can look for yourself when it comes to old wiring in old homes:

Old Cables

Metal cased, fabric covered, or frayed wires are signs that your wiring is outdated and unsafe. Many times during the early 1900s, electrical wiring was “protected” by metal jackets or canvas-like cloth, which can cause problems if the insulation in your walls has been damaged or aged, or even if the metal electrical cords were placed on inadequate grounding. If the wires get exposed, or start to fray in these two locations (next to insulation or on top of a poor electrical foundation) this could be a serious fire hazard waiting to happen. You know you need to call an electrician and get your wiring replaced when you can see any scorch marks on switches or outlets, when you see torn, damaged, or missing insulation, or when you see exposed wires that could potentially cause a fire.

ZINSCO and FPE Panels

Zinsco Panels

While popular around the 1970s, Zinsco panels are almost obsolete today. However, older homes can still have these panels as a part of their home’s electrical system. Not every Zinsco panel needs to get replaced, but it would still be a good idea to get it inspected, as these panels have circuit breakers that have been known to melt into the main bus bar and cause a fire.

FPE Panels

Federal Pacific Electric panels were distributed throughout thousands of homes in the 1950s to the 1980s, and have an unfortunate reputation of being extremely hazardous to the safety of you and your home. These panels have been known for their inability to trip the circuit breaker when the circuit is overloaded or short. When the breaker doesn’t trip, it instantly puts your home at a fire risk because the circuit is taking on much more than it can handle and has no way to shut itself off.

If you recognize either two of these logos on your electric panels in your home, call an electrician immediately to get them inspected.

Old Fuse Boxes—Below 100 Amps of Power

Houses built before the late 1940s and early 1950s were not expected to handle the amount of electricity that we use in modern time. That being said, the homes were installed with a circuit box that can only power 60 amp service (four fuses), or sometimes even 30 amp service (two fuses). This means that your older home may not be able to power all of the appliances and electronics that you have in your house. If your breaker is tripping constantly, or your electric bill is through the roof, this may be a sign that your older home needs an electrical inspection to update the amp-service. Older electrical panels are also at risk of starting a fire. If you are unsure whether or not your home is experiencing this, call an electrician to be safe, and they will be able to give their expert opinion on whether or not you need to upgrade your electrical panel in your older house.

These are just a few signals of outdated electrical work in an older home, but each one is a serious risk to the safety of you and your family. If you have an older house, be sure to get it checked out and evaluated for safety. The same goes for those who are looking to buy an older home in the Colorado area, as the electrical work could be outdated and dangerous.