As we venture further into the era of climate change, humans are constantly searching for ways to decrease energy consumption and increase efficiency. Unfortunately, there's no silver bullet. Truly reducing our impact on the global climate requires a combination of an increase in renewable power generation, behavioral changes to decrease consumption and increasing the efficiency of our homes and appliances. Even as we strive for improvement, sometimes we fall short. According to a new study from the University of California, Berkeley, for example, a federal Weatherization Assistance Program is not bringing in the expected efficiency benefits.

Looking for the Win-Win

Investments in home efficiency are usually considered win-win scenarios. Reductions in energy consumption lessen the impact on the environment and reduce energy bills at the same time. Many upgrades, like replacing an outdated refrigerator with a new Energy Star-certified model, will eventually pay for themselves in energy savings.

However, not every savings promise comes through. The Berkeley study looked at 30,000 households in Michigan that upgraded their home systems with new insulation, weather stripping, HVAC equipment and more. The federal government paid up to $5,000 per house for the improvements, but the average household only realized $2,400 in savings during the lifespan of their new efficiency features. That's not a great return on investment.

Ancillary Benefits

The households saved 10 to 20 percent on their energy costs, on average, which is only about 40 percent of what they were projected to save. The results are discouraging for consumers who are striving to implement any cost-saving measures they can find. Electricians and home service technicians can help you upgrade your home systems, but the changes will only go so far.

There were other benefits to the weatherization program outside the raw financial data, of course. The investments were aimed at low income households, so the money saved helped reduce poverty in the area. Plus, the reduction of carbon in the atmosphere from the program has additional economic benefits. Nevertheless, the disappointing result could be a blow to the willingness of the government to make similar investments in the future.

Let the Buyer Beware

The big lesson for the consumer? Don't believe just any claim about energy efficiency, and do your due diligence before investing in a big-ticket upgrade. You can and should make efforts to reduce your energy consumption, but be careful not to blow your investment dollars on items that don't give you a good return.

"This underscores the value of field-testing," paper author Michael Greenstone said to Vox. "Particularly in a world where economy-wide carbon pricing does not look feasible, we should be redoubling our efforts to find those CO2 reduction measures that have the biggest bang for the buck."

If you need advice on how to get the best return when it comes to energy efficiency, find an experienced electrician who can help you invest your dollars wisely and steer you away from less effective purchases.

Explosion proof fixtures are a necessity for environments which output potentially explosive or flammable fumes, produce dust of dirt in the air, or similar situations in which a gas could enter the fixture and cause damage to the light or well-being of the facility.

If you are currently running or working with a facility which requires these explosion proof light fixtures, the list of 3 must-haves below will clear the air and hopefully set you on the right track to ensuring you have the proper setup and design.

First on the list, we are going to talk about the actual technology within the fixture and why it is so important.

While a big part of vapor proof lights is the actual fixture and its design, we think the luminaire within the fixture is equally as important.

We simply can’t recommend any other technology other than LED because we truly believe in it. To give you a little bit of insight on industrial LEDs, here are some of the reasons why companies of all sorts are converting to LED:

As you can see, just from these three main benefits that all sorts of facilities are realizing can really be game changing in terms of savings.

For these reasons (and more), we thought it was a must to have it first on the list.

Interested in learning more? Find Class 1 Div 2. For this reason, we suggest you always inquire with a reputable and knowledgeable company that offers and deals with explosion proof lighting when inquiring about your lighting project.

If you can’t find a reputable company to ask your questions, just LED explosion proofs offer the long-term solution is clear.

Especially when you consider in rebates, your initial upfront investment can be reduced greatly. While these rebates do vary from place to place, they are most often available when you buy DLC qualified fixtures. Not only are DLC qualified fixtures going to make you more eligible for rebates through your utility company, but they also provide other benefits. The biggest benefit of buying DLC qualified lights is they have ben tried and tested and, in most cases, do what they claim. In a busy world of lighting, not all products do exactly what they say. This is most common when a light is not qualified by something like the DLC.

Our main advice is this; to get the best value buy only DLC qualified fixtures. If you don’t, you may actually end up spending more upfront (by not getting any rebates) as well as more energy usage overtime, due to a less efficient build.

Another major cost saver can come through retrofitting. The only time you can retrofit is if your fixture is still functional and can fit a LED retrofit in it. If you do not match these requirements, then a full replacement will (typically) be required.

If you can, we suggest you retrofit. It saves money in two ways: retrofit kits are cheaper than full fixture replacements and the cost to retrofit is typically less time consuming and thus, less expensive.

In Summary

We know that a sensitive environment can be stressful to deal with, especially when it comes to the lighting system and the safety of the facility.

The above 3 must-haves are just the beginning, and each situation can vary greatly. As always, we suggest you consult with some lighting professionals to truly discover what you may require for your facility and operations.

Lights are one of the greatest things about the holidays. You’ll find them in trees, colorfully decorating home exteriors; you’ll even find them on vehicles. And honestly, we love it. Lighting is one of the keys to the spirit of the season and an integral part to this time of the year. But, as we’re all well aware, they aren’t exactly the easiest thing in the world on your energy bills.

Looking for ways to keep your holiday lighting costs at a minimum this year? With more than 25 years of experience and knowledge, we can give you a hand! Sit back, relax, and let the certified electricians at Hoffman Electrical show you some quick and simple ways to lower holiday lighting costs!

One Hour Heating & Air Conditioning®, Benjamin Franklin Plumbing® and Mister Sparky® are North America’s most trusted home services brands thanks to the skilled, hardworking tradespeople who proudly wear our uniforms. That’s why we’re equally proud to announce a partnership with Mike Rowe, creator and executive producer of CNN’s “Somebody’s Gotta Do It” and Discovery Channel’s “Dirty Jobs.”

In addition to his TV work, Rowe is the founder of the mikeroweWORKS Foundation, which is dedicated to promoting honest work and reinvigorating the skilled trades. Our home services brands have committed to donating $100,000 in scholarships to mikeroweWORKS over the next 12 months, and will work alongside Rowe to promote the skilled trades industry and empower future and potential trade professionals.

The partnership, announced yesterday at our annual convention in Las Vegas, features Rowe in television, radio and print advertisements, where he will appear alongside real technicians from each of our brands. Rowe will also work with the companies to highlight the benefits of careers in the plumbing, electrical and HVAC industries. No other home services provider has embarked on a partnership of this kind to promote skilled trades and the professionals who’re carrying those industries forward.

“We are pleased to join forces with Mike and appreciate his commitment to the trades,” said Mark Baker, president of franchise for the three brands. “The men and women with careers in this field power all three of our brands. We are excited to support them and share the message of how our trusted technicians, plumbers and electricians are like superheroes to our customers, often saving the day when they encounter a problem and helping to protect their homes and families.”

Rowe became a household name by working alongside tradespeople in essential but often unglamorous fields in his two television programs. Since establishing mikeroweWORKS in 2008, he has written and spoken extensively about the value of hard work, the widening skills gap, offshore manufacturing, infrastructure decline and related topics. To date, his foundation has awarded more than $3 million in education “work ethic” scholarships for schools around the country.

“The goal of mikeroweWORKS is pretty simple - help close the skills gap by encouraging men and women to get the training they need to pursue good jobs that actually exist,” said Rowe. “One Hour Heating & Air Conditioning, Benjamin Franklin Plumbing and Mister Sparky are perfect partners because, collectively, they offer thousands of jobs waiting to be filled. And they know first-hand what a "good job" really is. I'm flattered for the chance to speak on their behalf and grateful for their generous donation to my foundation."

Join us in welcoming Mike Rowe to our home services family, and watch for him in new advertisements for our brands coming soon!