Museums have a hard line to walk, exhibiting items for public education and enjoyment while protecting those same collections from damage. Today’s museum also carry the additional weight of safeguarding the future of the environment – as well as their financial future – against the dangers of unnecessary energy consumption. What advancements have been made in preservation lighting technology to help accomplish these goals?

Light, including all three types: ultraviolet (UV), infrared, and visible light, causes permanent and irreversible damage to museum pieces. Cumulative and dependent on the intensity and duration of exposure, light affects chemical composition, physical structure, and, the appearance of a collection. There is no conservation treatment that can repair it. Light damage is forever.

Only complete darkness ensures conservation, since exposure to light in any form naturally breaks down items. However, keeping pieces locked away in the dark defeats the mission of the museum – sharing those works with the public. It is thus a museum’s dilemma to find a suitable solution that balances the best of both worlds, in addition to considering energy costs and the environmental impact of its lighting selection.  

In your search for preservation lighting, you will find that a great deal of lighting solutions involve UV (ultraviolet light), the most energetic and destructive form of light. These include natural light, fluorescents, HID, and tungsten halogen lighting. Fortunately, the effects of UV can be controlled with simple filters, offering a greater variety of lighting options. UV filters are hard plastic tubes or soft sleeves wrapped around bulbs/light sources, which filter and block up to 98 percent of UV light, preventing its damaging effects. NOTE: UV filters lose efficiency over time and must be replaced every eight-10 years.

Specific, detailed recommendations for preservation lighting levels based on your collection type can be found from various sources, including the Library of Congress, National Park Service, UNESCO, and more.

Part of my job as an electrician is not only to help fix an electrical system when something goes wrong, but also to help my customers make sure that the fixtures are correctly installed. Installation is the most important phase for an electrical fixture or appliance; following the proper procedures can help ensure the maximum life for the electrical device, minimize its upkeep, and save you from costly repairs.

One of the most popular fixtures I am called to install are chandeliers, and with good reason.  As beautiful and elegant as they can be, home chandelier installation can be extremely tricky, even for those with experience.  If you have recently purchased a chandelier, I strongly encourage you to call a skilled Richardson electrician to have it installed; a talented electrician knows how to best hang, wire, and secure your chandelier to the ceiling. With that in mind, here are some important electrical safety tips to ensure you get the most out of your new light fixture:

Motion sensor LED stair lights let you safely and effectively navigate your steps while eliminating the need for any action. And because they turn off automatically, they also save power! We’ve recently installed these handy little LED stair lights and wanted to share the process with you.

wire that will be needed. It is best to order more than you need so that there’s slack in the line and enough to extend to where your power supply will be mounted.

It’s important to choose the correct wire gauge for the length of wire you need and amount of current that will be flowing through it. The key is to avoid voltage drop, which happens when the supplied energy of a power source is reduced as electric current flows through wire (or any other pieces of equipment that do not supply voltage on a circuit). The longer the run of wire, the lower the gauge of wire needed.

*If you need help determining the correct wire gauge, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

3. Using wiring from the

4. Use a run of wire to join the PIR sensor at the top of your steps with the power supply. You can wire both PIR sensors to the power supply using electrical tape or with

5. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

7. Finally, connect to power.

LED stair lights and

4. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

6. Finally, plug the power supply into your wall outlet.

Power overloads are one of the many scenarios an emergency electrician can help a homeowner address and prevent. In the event of an electrical emergency like a power overload, which can be the result of faulty wiring, only a qualified emergency electrician will be thorough enough to find the problem, repair it and help you avoid it in the future.

Overloads, though seemingly minor issues, are, in fact,  one of the most overlooked and dangerous problems you can have with your electrical system. An overload can cause everything from electrical shorts to fires. What’s more, a power overload is one of the most avoidable electrical problems—you don’t have to let it get to the point of electrical emergency.

What is an Overload and What are the Causes?

During a power overload, the circuit gets overwhelmed and shuts itself off. It’s a common occurrence in many homes. For instance, you could have the microwave, a rice cooker and a stove running off the same circuit in your kitchen when you suddenly notice that your power goes out in the kitchen while it stays on in the rest of the house. Then you check the breakers and realize that the breaker wasn’t tripped.

Because they see things like this all the time, licensed electricians can easily identify the source of the trouble. There are generally three main causes of power overloads.

 Power overloads are preventable with a little thought and planning. When ignored, however, they can result in very costly repairs—or worse.

 Electric Man: Emergency Electrician to the Rescue

Are you experiencing a power overload or another issue that requires an electrical troubleshoot? Electric Man’s emergency electrician crew is available 24 hours a day, 7 days a week to respond to your electrical emergency. Give us a call today at 972-792-7270 to learn more about our emergency electrician services. You can also connect with us on any of our social networks!