Add the perfect custom finish to the front of your home with outdoor hanging lanterns and wall lanterns.

When using two outdoor lanterns, they should measure about 1/4 the height of the front door(s). When you are using only one lanterns, 1/3 of your door height is appropriate.

Outdoor hanging lanterns should be centered over your front door(s), high enough so that the doors may open and close freely. If you have a picture window or archway above the front door, center the fixture so that it may be seen from inside your home.

Wall lanterns surrounding the front doors should be proportional to your home, when in doubt, size up! Remember, fixtures appear smaller from curbside viewing than most people would imagine.

Wall lanterns are also appropriate for rear and side entrances and by garage doors – same rule of thumb for sizing applies for these areas.

Path Lighting should be placed 6′ apart to ensure adequate beam spread.

Be sure to make your space functional! Task lighting is an important piece of the design; it will provide guidance and illumination in the necessary areas to ensure safety.

Focused illumination on key holes and security pads allows for easy access when you are entering and leaving your home at night. Outdoor LED wall lights or recessed spotlights work well in these areas.

Add path lighting to walkways every 6’ to provide adequate beam spread. This will create curb appeal ambiance and visibility when walking at night. Don’t forget to add light near the house numbers – this can help in emergency situations and for deliveries!

After the sun goes down be sure your home has the same curb appeal as it does during the daytime by adding outdoor and uplighting to the landscape.

Illuminating trees or other elements from below will create soft focal points in the landscaping after the sun goes down. Use a flashlight to test where you’d like the light to hit, then mount the fixtures accordingly. Be sure to mount fixtures out of grass for ease of mowing and other landscaping tasks.

Be sure to view your outdoor lighting after dark before signing off on a project; it’s easy to make necessary adjustments to refine your outdoor lighting design.

To avoid being “that neighbor”, be sure to eliminate glare and make sure your outdoor light fixtures do not create “light trespass” into your neighbor’s property.

2017 is here, technology is improving, and we’ve decided to put together of our 4 best warehouse lighting fixtures that we have here on MyLEDLightingGuide. This is not a comparative list, but rather a list of our best lighting technologies for warehouses that is up to date and current for the year 2017.

Although all the lights on this list might not apply to you, surely there will be a few on this list that apply to your needs (e.g warehouse aisle lighting). As we go through the list, keep in mind that these are all currently available and can be inquired about by

In warehouses, replacing old and outdated fixtures entirely can be a pain. Our easy to install LED high bay retrofits make it easy to replace metal halide warehouse bulbs with LED without the costs or hassle that comes with an entire fixture replacement. This is a highly popular option when warehouses look to LED to bring savings in their warehouse or factory.

Since there are so many options of these fixtures,

Maybe you are in need of entirely new fixtures, not just a retrofit kit. Our extensive listings of LED high bay fixtures gives you a great option to fully replace existing fixtures or even an entire lighting redesign.

If you are in an industry which requires explosion proof lighting, our high and low powered options are great to fit in warehouses (factories more often). You have the required explosion proof light that you need with the benefits of LED technology which is going to save you money. learn more about LED warehouse lighting options here.

In my 27 years, I have heard these questions a lot: “Why is it so hard to find the top electrician for my electrical repairs? There are so many choices and my problem seems so easy, any electrician should be able to do it. Does it matter who I call? Aren’t all electricians the same? How do I find an expert electric man?” – Nick Shaeffer

The answer is no – not all Twitter, Google Plus.

Are you planning on having lots of family and friends over this holiday season? Maybe you are hosting a lavish party or a quaint dinner party. Whatever the case may be, wouldn’t it be nice if you had a little more space or if your kitchen was setup a little differently to make cooking for a large party easier? There is no better time to remodel your home. Consider it an early gift for yourself. A gift that will add value to your home while making it a little more enjoyable for you to live in. If you are ready to make that basement remodel or kitchen remodel happen, now is the time. Your electrician in Beverly Hills, like the team at The Electric Connection, is here to help.

You will likely need to hire a contractor to do the remodel. It makes it easier and you can keep up with your busy life. A remodel will involve some Beverly Hills electrical work. Whether you are tearing down walls, adding on a room or moving appliances around, you will need an experienced electrician to complete the wiring portion of the remodel. Meet with the electrician and discuss what it is you need. If you need extra outlets on one side of the room or would like data lines in a certain place, communicate that to your electrician.

It is important you choose an electrician who will work well with your contractor. Being licensed to perform the work is also an important factor. Remodels will require permits from your county building department. You want to make sure the wiring passes inspection the first time. By hiring a qualified electrician you can ensure the process will go smoothly and your remodel is finished in time for the holidays. Give The Electric Connection a call today and get started transforming your home.