In our previous blog, the professionals at Electrical Gurus gave out some ways tips for increasing the safety of holiday decorations throughout the holiday season. Today, we’ll share even more ways to safely and effectively decorate your home this holiday season.

Even if the lights are unplugged when you’re hanging them (which is advised), be sure to never use nails, screws, or tacks to hang your Christmas lights; instead, opt for clips for interior and exterior applications. This will keep your wires from accidentally becoming nicked or frayed during or after the hanging process, which can get dangerous quickly.

Never use extension cords that don’t feature ground or are not rated for outdoor usage outdoors to avoid electrocution risk. Furthermore, it is especially advisable to only plug lights into GFCI outlets, especially if they are plugged into the exterior of your home. These outlets will essentially shut themselves off in the event of a short, which is crucial to avoiding safety concerns.

Always use timers for decorations and lights to prevent yourself from forgetting to turn them on or off. Lights should never be left on when nobody is home, which is why it is advisable to turn them off during daytime hours when the family is out-and-about. Timers keep your home safe by preventing power from flowing through the lights during the day, automatically activating them in the evening hours.

Large decorations, cords, and lights should all be kept well away from tripping hazards. Of special note is extension cords, which should never be allowed to cross walkways without proper coverage. Ideally, extension cords shouldn’t be run along open space in any way. If someone trips over one decoration, then odds are all attached decorations are at risk for getting dislodged or damaged.

If your home has the proper circuit breakers, there is little risk of a fire starting from overloading an outlet; that doesn’t mean it is wise to plug in numerous strands of lights into a single outlet. Spread the burden of lights and decorations across numerous breakers whenever possible to avoid taxing your electrical panel too much in certain areas. If your home is not equipped with a circuit breaker and still uses outdated fuses, please give us a call right away to talk about upgrading your panel.

We hope you’re safe this holiday season, but if you happen to overload your circuit breakers or have a concern about the lighting of your holiday decorations, be sure to give us a call right away. The electricians at Electrical Gurus want to help to keep every Des Moines family happy and healthy throughout the holiday season.

Anyone who has ever tried to plug in an appliance only to find that it wouldn’t turn on is familiar with how frustrating electrical outlet wiring problems can be. The whole purpose of having outlets is the convenience, but that goes right out the window when they stop working without warning. Although a dead outlet might automatically seem like a big problem, sometimes it can be due to a simple issue. This isn’t always the case, of course — sometimes there will be electrical outlet wiring problems that can only be addressed by a professional, particularly when the issue is with your outlet’s wiring.

You might be able to save yourself a call to an electrician if your outlet problem is something easily fixed. You can even resolve some minor issues without the use of tools! If you know what steps to take, you may be able to figure out if the dead outlet is something you can remedy yourself. If you discover the problem is something that should be handled by a professional, don’t take any chances. Messing around with wiring can put you in danger and damage your electrical system instead of making the problem go away.

A simple issue can quickly turn into a very expensive one if you aren’t careful. Here are some easy things to try that won’t put you in any danger:

When a light switch or electrical outlet doesn’t function correctly, a professional electrician can trace this back to a variety of causes. First, it’s possible this non-functioning device was never connected to the wiring in your building. Secondly, the circuit affected by a switch or outlet may not be completed because of another component. For example, a switch may control an outlet which is unoccupied by a lamp or any other electrical device. Also, an outlet may be connected to a switch which is in the off position. A third cause might be related to a defective breaker, or a breaker which was tripped or turned off, but never switched back on. However, a fourth possibility may relate to a much larger problem.

Sometimes, a switch or outlet fails when it is damaged by arcing. If the arcing was caused by a connection to aluminum wiring, great potential hazards exist. If your home or building was constructed or renovated before 1972, or during the late sixties, it may contain aluminum wiring. Aluminum wiring was used legally during those years, but outlawed for installation in new homes, commercial buildings, remodels and renovations after it was identified with conditions which could lead to electrical fires.

Although aluminum wiring itself is generally no more hazardous than copper, its splices and connections with other metals present a real hazard because they can become corroded and begin arcing. Because arcing in these connections can lead to a fire within surrounding materials, aluminum wire was discontinued. However, many homes still contain aluminum wiring, and research conducted by the Consumer Product Safety Commission (CPSC) reveals that buildings with aluminum wiring pose a fire risk which is 55 times greater than the risks with similar structures wired with copper. So, if you discover an electrical outlet or switch which doesn’t appear to be functioning correctly, it’s possible this outlet or switch was damaged by a connection with aluminum wiring.

If you have safety questions about this type of problem, or any electrical concerns regarding your residence or commercial building, please contact Bryant Electric Service at 512-402-8587. Our licensed electricians are trained and equipped to perform professional safety inspections, and they can repair any type of electrical problem.