There are many “laws” or rules when it comes to electricity. While most people will still need to call an electrician Pasadena for major electrical problems, it is still nice to understand the basics so you know what is happening with your electrical devices when you plug them in or flip the switch to the on position. One of these so-called laws is “Ohm’s Law.” Learn more about how it works with your appliances.

First, you must understand that for electricity to work, it must complete a circuit (loop). Generally, these circuits are controlled by copper wire because it has a very low resistance and carries the current with ease. The amount of current flow is decided by the amount of resistance in the circuit. If the resistance is high, then the current will be low. For the current to be high, the resistance must be low (such as it is with copper wire.) This is the basis for Ohm’s Law.

While it may seem like having a higher current would be better, this is not always true. Too much current can be dangerous. For household circuits, it is normally best to keep the current under 20 amperes. More than that will pop the circuit breaker. When your circuit breaker pops, that is keeping you and your family safe from having too much current flow through the devices in your home.

Ohm’s Law may not be something that you need to understand in depth, but having this basic knowledge will make it easier to know what is going on behind the scenes of your electronics. If you have questions about the electricity in your home, or you need help figuring out your circuits and circuit breakers, call Electric Connect, your number one choice for an electrician in Pasadena. The experts at Electric Connection are here to help you every step of the way.

Appliances can make for exciting and valuable additions to your home; however, they use a lot of electricity and can ultimately take a toll on your electrical system. As a Plano TX electrician, I have seen it time and again—homeowners buy new appliances that, even when they have an “Energy Star” label, use a significant amount of electricity. These homeowners are unaware, however, that the more important problem lies in the installation of these devices, taking for granted the safety precautions that were addressed (or not) during the installation process.

The old “set it and forget it” mentality that a lot of people seem to have when it comes to their new appliances is that, whether or not a Plano TX electrician is called to help install the appliance, the importance of appliance installation safety is ignored and the awareness of potential dangers and mistakes in installation is minimized. As a result, things that at the time of installation seemed trivial in the long run can cause significant problems.

Ideally, with the help of a Plano electrician, you should have no problems installing your new electrical equipment. Here are some tips that might help you prevent safety concerns with the installation of your brand new appliances:

Chances are, you don’t need to call your Plano TX electrician to help you with every new appliance installation. However, if you have any doubts or questions about how to install your appliance safely, don’t hesitate to call us at Electric Man so we can make sure that your installation goes off without a hitch.

Give us a call today at 972-792-7270 and connect with us through our website, www.electricmaninc.com. Also, feel free to ask your questions in the comments section of our blog and we will get back to you soon.

Without electricity, we would have an extremely difficult time getting through our day. We rely on it for everything from making our first cup of coffee in the morning to charging our cell phones as we sleep at night. All of the appliances we use on a daily basis must be plugged into an outlet. When those outlets are not working properly or pose a threat to the safety of your home, you need to call an electrician in Burbank. You can count on the team at The Electric Connection to send out a knowledgeable electrician to take care of the problem.

There are a number of different reasons why an outlet may be giving you problems. You may not even realize an outlet is faulty and assume an appliance is on the fritz or an incident was just a fluke. The following signs indicate there is a problem that needs attention.

• Sporadically working • A crackling noise or smell of burning wires

Any of these symptoms can suggest a serious problem is lurking behind the walls that you cannot see. Electrical fires are one of the leading causes of home fires. It is imperative you hire somebody who has the proper training take care of your Burbank electrical needs.

While the electrician is investigating the problem, the wiring will be inspected to determine if it is outdated or unsafe. If the outlet that is causing the problem is in the kitchen or a bathroom, it would be a good time to have the outlets in those areas upgraded to GFCI outlets. If you would like to make your appointment to have your outlets inspected, replaced or upgraded, give The Electric Connection a call today.

Every home has a fire detection system. This vital safety feature should be well understood. Smoke detectors, carbon monoxide detectors and security systems give homeowners peace-of-mind. Furthermore, when combined with a security system, these devices work together to form a complete home protection plan.

The second type of detector is an ionization detector. It uses a small amount of radioactive material to ionize the air in an internal chamber. This in turn, generates a voltage that can be measured. By-products of combustion will change the voltage that is generated and trigger the alarm. This type of detector is better at identifying active combustion with little to no smoke.

While both types of smoke detectors will safely alert a homeowner to a fire, combination alarms exist that employ both methods. Consequently, the responsiveness of the whole system increases. Hard-wired detectors are also available which can be wired to trigger all the alarms in a home if anyone detects a problem.

In any appliance that uses combustion, such as a furnace or stove top, a potential exists for hazardous carbon monoxide buildup. This by-product is tasteless, odorless, colorless, and highly toxic in large concentrations. Therefore, a carbon monoxide detector is highly recommended. It will monitor the levels of CO in the air and alert inhabitants before they become dangerous. They are available as stand-alone units that can be plugged in to standard wall outlets or as combination roof-mounted CO and smoke detectors.

Home security systems have been around for decades and make use of a combination of sensors including door, window, glass-break, and motion sensors. Historically, these devices were hard-wired and fed back to a central control panel. Many modern systems make use of wireless sensors that allow for easy retrofitting of existing homes. Door and window sensors utilize a small magnet and magnetic strip held open when the door or window closes. If the magnet is moved away, the magnetic strip springs closed and triggers the alarm.

Glass-break sensors are placed near windows and use a microphone to listen for the distinctive frequencies associated with glass breaking. Motion detectors take advantage of a variety of technologies, such as passive infrared, microwave, or ultrasonic. This technology detects something moving within its range. These can be part of exterior security lights or interior motion sensors. Security cameras can also play a role in home security. Install them indoors or outdoors.

When installed and used properly, a home security system can easily increase home safety while reducing the chances of burglary or fire. Most insurance companies offer discounts for home security systems. Because of this, the entire cost of the system may be offset or eliminated altogether. Be sure to ask your insurance company about discounts to homeowner’s insurance for improving or installing a new security system.