Millions of dollars can be saved every year in every major or little city in this country and those around the world. This sounds like a newspaper headline but it is the actual hard truth. The amount of energy necessary for street lighting is massive. For example, Britain needs about 1900 gigawatt hours for street lighting alone, which yields 3 million tons of carbon dioxide emissions which could all be avoided and greatly reduced. Imagine cutting that down to 20%. Can it be done? Of course it can, LED street lights have been proved to have that effect.

With the economic crises, cities have started to switch off lights to save up on the electricity bill. This is one of the many solution proposed. Unfortunately, LED street lights were not proposed and that is a major mistake.  There are installation costs you might say. Well, sometimes there are, but these are equal to zero based on savings achieved over time. It means not seeing the whole picture because the lighting systems now used on the streets needs extensive costly maintenance while LED street lights will need almost none.

This is not a small fact. Maintenance means dozens of monthly salaries and costs with equipment and cars. This is only for one city but imagine the positive effect of this at a country scale or even a global scale. It will actually make a difference. In addition, these LED lamps are retrofit so there are not additional costs on that. Simply when one light burns out it should be replaced with an LED which reduces your costs by not having to fully replace your lights entirely.

There have been cases when the LED obvious benefits are:

The list can surely go on. Most people get stuck on the price but at such a big number of Street Light LEDs needed any dealer will be more than happy to negotiate a solution for the whole city so the costs will be lower than normal. In addition, the provider will stick around with advice and consultation.

In the end, it is just a matter of putting ideas into practice. Only this way we will manage to create a better world.

The concept of fuel cells as an energy source is credited to a chemist, William Grove. He demonstrated in 1839 that electric current could be produced by an electrochemical reaction between hydrogen and oxygen over a platinum catalyst. Thereafter, many alternate forms of the technology emerged for producing electricity from various materials and catalysts.

The main reason why fuel cell companies have not been profitable is due to startup and operational costs. Although fuel cells provide clean, inexpensive energy, it is much simpler to use coal or natural gas. These industries have been around for a long time, so their processes are now streamlined.  Unless legislative action requires the use of clean energy, the adoption of fuel cells will remain slow.

Fuel cells are attractive for energy production because they provide clean energy, with no harmful byproducts. Although commercial adoption of fuel cells remains slow, it is possible that the technology could become disruptive and make a significant impact on the energy industry. That could happen if environmental pollution due to the burning of fossil fuels becomes a global concern. So far, large countries that account for a great deal of pollution, such and China, have been indifferent about the pollution they cause.

Electrical ballast replacements are a common project in both residential homes and commercial buildings. An electrical ballast is a device used to regulate electrical currents so that they do not reach uncontrollable levels. A common application of electrical ballasts is those found in any type of light structure such as fluorescent or neon lighting systems. Depending on the size of the replacement project, a licensed electrician isn’t always necessary; however, if you don’t have the proper tools or experience, it is a good idea to consult with a licensed electrician before attempting the replacement. To simplify the procedure, here are the answers to three common questions about electrical ballast replacement.

Similar to replacing a light bulb, if you have any type of neon or fluorescent light, you will eventually need to replace the electrical ballast in the lighting structure. Replacing the electrical ballast is a more reasonable solution than replacing the entire neon or fluorescent light structure. You will know when it’s time to replace the electrical ballast because the light will begin flickering or will stop working entirely.

Yes, you can perform a ballast replacement yourself. While ballast replacement can be a simple procedure, if not done properly you can cause damage to your replacement bulb but also the fixture. Before performing the replacement yourself, make sure you are confident and understand all the steps involved or you could end up with expensive bills you were trying to avoid. If you require assistance or have any questions about electrical ballast replacement, contact our team of licensed electricians at Expert Electric. We would be happy to help.

Thankfully, an electrical ballast replacement does not require a fully stocked tool shed in order to be completed. For most electrical ballast replacements, a few simple tools will do the trick. Depending on the type and size of your replacement, your replacement may require a simple screwdriver, nut driver, drill, pliers and wire stripper. This is in addition to the new electrical ballast which you will be replacing.

For more information on electrical ballast replacement, please contact the licensed electricians at Expert Electric. You can reach us at 604-681-8338 or you can book an appointment online through our website. For 24/7 immediate response emergency service, please fill out a form on our website so that we can get in touch with you as soon as possible. We offer various types of electrician services including electric water heaters, surge protectors, ceiling fan installation and we service all throughout the Greater Vancouver area and Lower Mainland.

If you’re like us, you are proud of the artwork you’ve chosen to adorn the walls of your home or business. A framed movie poster, an original oil painting, or even a stylish wall hanging all serve to bring color, and life to a room. Make sure that the images that have been so carefully selected are seen in their full splendor with the right lighting.

Today’s modern floor plan is very open, which means your lighting should be cohesive throughout the home in both style and light quality. Do you prefer cool lighting or warm lighting? If you prefer one to the other, make sure the bulbs you select for your home lighting give the same light temperature.

The lights in the entry of your home should welcome guests as well as adequately illuminate the space. If your entrance has high ceilings, consider installing an elegant chandelier. If you have a single-story foyer, try adding a lighting fixture that sits flush or almost flush with the ceiling. Pair it with two wall sconces on either side of the front door.

Light adds visual interest to an area. When deciding on how you plan to light your space, consider these three lighting layers.

Dimmer switches add variety when lighting your room. Dimmer switches can be a great addition to your dining room, which can serve as a place for the kids to work on homework during the day and a gathering place for dinner parties in the evening. The dimmer switch allows you the versatility you need to have that bright light for the kids and a softer, subdued lighting for the grownups.

If you notice your kitchen is a bit dark, or you simply want to add more visual interest to your home, adding counter lighting is a great solution for this. Not only does it provide visual interest, but it also provides ample light for kitchen counter tasks.