The pool at your Tampa home is an excellent place to enjoy recreation, to relax, or even to host events and parties. But are you getting the most out of your pool design? The use of light can add not only dynamic appeal to your space, but provides a greater level of safety. Not to mention the fun of a nighttime pool party!

Are you sporting the latest in mobile technology? Smartphones, tablets, and various mobile devices are all the rage these days, going out of date faster than the milk souring in your fridge. And while you’re likely spending a lot of money keeping up with them, it’s a good bet you haven’t bothered keeping up with the outlets that keep them powered for your convenience.

Besides preventing you from plugging in 3-prong appliances, ungrounded 2-prong outlets present a substantial safety risk: a risk of electrical shock to you, and a risk of frying your expensive electronics.

Simply replacing that old 2-pronger for a 3-prong outlet will NOT solve the problem, but instead create an electrocution and appliance hazard. Rewiring the panel with a 3-wire circuit is crucial to providing the necessary ground. You may also consider upgrading to a GFCI , which is less expensive and prevents shock-related issues, but this solution will not provide the necessary ground to protect sensitive electronics.

Without properly grounded outlets, surge protection is a no-go. Whether you buy a $10 surge protector or a $200 one, it offers no protection whatsoever to your appliances without adequate ground.

GFCIs protect you from electrical shock in rooms with increased risks, such as those that could be exposed to water. GFCIs are identified by the “test” and “reset” buttons on receptacles. These devices save lives by immediately stopping the flow of current when it travels along an unintended path - such as into you. They are currently required for use with dishwashers, in baths, kitchens, laundries, garages/utility rooms, crawl spaces, unfinished basements, spa/pool areas, and home exteriors.

Upgrade to GFCI outlets. It’s not worth putting your family at risk to postpone this upgrade. Fear not if your home is older. GFCIs work with or without grounding, and are easy and inexpensive to install.

The CPSC (Consumer Product Safety Commission) estimates the installation of GFCIs in household branch circuits could prevent more than 200 electrocutions and thousands of electrical shocks and burns in and around the home annually.

It’s not the mess, the whining, or the drooling, it’s those childproof outlets your home is missing. In older outlets, all a child has to do is stick an object in a single prong to suffer electrical injury. Whether children live with you or only come for the occasional visit, childproof outlets offer inexpensive, effective protection against dangerous electrical shocks and burns resulting from tampering.

Adding childproof outlets is a simple and inexpensive child protection solution. Childproof outlets require the use of equal pressure in all prongs of the outlet simultaneously in order to allow for the flow of electricity. They are just as easy to use as traditional plugs for adults, yet still provide essential protection for children. Upgrading to childproof outlets is simple, permanent, and inexpensive, mere pennies more than traditional receptacles. They are so effective that they are now required in all newly built homes.

Of the over 2,400 electrical shocks and burns resulting from children toying with outlets annually, 70 percent occur in the presence of adults.

These outlet types are mandated in new homes today because unlike their predecessors, whose main function is merely to deliver electricity, these outlets save lives. Still not convinced? Consider the small cost of upgrading the outlets in your home to the enormous cost of dealing with any of the situations above. You might think your home safe, but is it?

Upgrade your outlets – not your smartphone. They’ve been patient long enough. Contact Mr. Electric® today.

If you are looking for a Garland electrician, be sure to find one who cares enough about safety to help determine if your home is up to par. Some older homes often lack basic precautionary features that are inexpensive, yet vital to the safety of the family. One of these features is the GFCI, and any Garland electrician should be able to determine if your home has one.

Recently in Texas, a family experienced a heartbreaking illustration of what can happen without a GFCI. The mother was bathing her two children, ages five and six, when a hairdryer that was plugged into a nearby outlet fell into the tub. Both children were killed by the electrical current passing into the bathwater.

One of the most horrifying things about this story is that this accident was preventable! Installing a Ground Fault Circuit Interrupter, or GFCI, could have saved these children’s lives, at a cost of less than $60. The circuit in their bathroom was not equipped with this simple piece of equipment, simply because their home was an older home.

When the electrical current is imbalanced, it indicates that the current is passing through something that it is not intended to pass through. A GFCI handles that situation by quickly interrupting the flow of current before it can do harm. Water is an especially dangerous conductor of current, so a GFCI should be installed everywhere that an electrical device might be plugged in near water. This means that GFCIs should be on outlets in not only kitchens and bathrooms, but also in garages, outside, near countertops, and near hot tubs and pools. While a layperson might not realize that, an electrician should. That is why, whether you are looking for a Dallas, Garland, or Rowlett electrician, you should make sure to find one with enough experience to spot potential hazards before they cause tragic results.

One of the best Garland electrical teams you will find is the crew at ElectricMan, Inc. Available twenty-four hours a day, seven days a week, ElectricMan’s team is made up of trained electricians who care about the safety of families. To learn more about finding an electrician Garland homeowners can trust, visit the website. For a deeper connection, join the online community on ElectricMan’s social sites, or call (972)792-7270.

Mechatronics, or mechatronic engineering combines mechanical and electrical engineering to design innovative products and systems. These systems must rely on mechanical and electrical components working together in harmony.

The list includes DVD disc drives, anti-lock braking systems, manufacturing, electric motors and clothes dryers, among others. These devices require electronic controls and feedback systems to interact seamlessly with their mechanical design.

Motor control systems operate by using a programmable logic controller or PLC. This system allows advanced programming and algorithms to dictate a motor’s behavior. Therefore, they can be programmed to control multiple motors or VFDs. A robotic arm or a large factory machine is a good example of this.

In addition, PLCs can accept inputs from a wide range of sensors and switches. This allows precise feedback from the machine it controls. Furthermore, it executes built-in software.

The smallest high-precision motors, DC motors, found in computer hard drives and DVD readers. Due to their miniaturization, they can be easily controlled by computer software to perform nearly any imaginable task. A battery powered quad-rotor drone offers us a prime example of DC motor control. Accelerometers and gyroscopes feeding data into a computer controller adjust the speed of each motor independently to keep the drone flying level.

A simple technology that combines electric motors with feedback control, known as servomechanisms, provides valuable information. They utilize a small electric motor, gearboxes, and a potentiometer to produce accurate position feedback to the motor itself. This ensures that the motor has moved to the correct position. Thus, precise movement control of a motor is possible. Applications of servos include RC car steering, fly-by-wire systems in aircraft, robotics, and industrial control valves.

Servos communicate with computer systems, allowing them to be part of larger mechatronic systems, so they can be controlled by PLCs and computer algorithms.

The field of mechatronics constantly evolves. Therefore, as it does, it incorporates cutting edge computer software and mechanical design, bringing to life new inventions. These breakthroughs make modern-day living much easier and more fun.

Interested in generator installation for your Annapolis home? It’s an excellent idea! In areas like ours, where the weather can get out of hand in a hurry, and electricity isn’t always guaranteed to be readily available, a backup plan is nearly necessary. But when you look into generators, suddenly you have options you didn’t know existed! Do you want a standby generator, a manual transfer generator; what size do you need? It can get pretty confusing!

Our Annapolis electricians have all of the necessary skill and expertise needed to ensure you get a generator installation that is sure to have you covered in your time of need!

When you have a generator that suits your home perfectly, you can expect:

There are essentially two types of generator: Manual transfer and standby. Which one you choose is partially up to personal taste, but there are some specific aspects of each you’ll want to consider before choosing:

Are you ready to prepare your Annapolis home for the worst? Contact Kolb today, for the best in peerless service and top quality installation!