As safe as we may feel in our own homes, it doesn’t hurt to add an extra layer of safety and security. Security lights can go a long way to making your home a little safer. Well-lit homes are deterrents against crime. Perpetrators are less likely to lurk in landscapes that are bright with no dark corners. Walking through your yard or from your car to the front door can also be dangerous if you can’t see well. An electrician in Glendale, like those at The Electric Connection, can help you make your home a little safer by adding security lighting.

You can opt to have the bright flood light variety or the kind that is a little dimmer, but just as effective. Security lights mounted above your driveway, your front door or your back door are all great places to place the lights. Motion detectors or timers are ideal and ensure you will never have to worry about stepping out of your car or your house into the darkness. An electrician will help you set the timer to meet your needs.

A Glendale electrician will need to wire the lights directly into your home’s main power. This is called hard-wiring and ensures the lights are always on. However, you can choose to have your security lights installed with a switch. This gives you the freedom to turn the light off and on whenever you need it. Part of your upgraded security lighting system can also include landscaping lighting. Lighting up darkened areas under bushes and in dark corners can help you keep other unwanted pests out of your yard. Nocturnal creatures will be less inclined to hide in an area bathed in light. If you would like to brighten up your outdoors, give The Electric Connection a call today.

Have you ever wondered about the difference between single-phase and three-phase circuits? If you currently reside in North America then you are likely accustomed to single-phase circuit power throughout your home. Although single-phase circuits are popular among residential homes and smaller commercial business buildings, some businesses may consider switching to three-phase circuits in order to reduce long-term electricity costs and improve the efficiency of their building’s electrical power supply. In order to provide you with a better understanding of the difference between single-phase and three-phase circuits, Expert Electric breaks down the difference, advantages and disadvantages of each below:

Single-phase circuits are generally used to power residential homes and smaller business buildings whereas three-phase circuits are common in large industrial buildings that require a more significant amount of electrical power. Not only does a single-phase circuit require a larger electrical current than a three-phase circuit, it is less efficient with its transferal of power. This is because its current only alternates between two wires; therefore, there is a point in the process where the electrical power in a single-phase circuit drops to zero. Since a three-phase circuit transfers the current between three wires, it is more efficient with the transferal of its electrical power and therefore never allows the power to drop to zero. This allows a three-phase circuit to provide electrical power to systems that demand more electricity.

The advantage of implementing a three-phase circuit is cost-savings. Three-phase circuits are more efficient with their transferal of electrical power; therefore, they are capable of powering much more at a lower cost. Office buildings and manufacturing plants can still operate with single-phase circuits although they would be more efficient with their power supply if they made the switch to three-phase circuits. The real difference between single-phase and three-phase circuits can be seen in large data centers and manufacturing buildings. These large facilities require more power to run their operations and will therefore witness greater efficiency and savings by making the switch.

As a California homeowner, you know that this is not the best time to put your house on the market, which may be why so many people are opting to upgrade their existing homes instead of seeking a replacement. One of the improvements you should consider is an electrical make over.

Electrical wiring can suffer wear and tear, and older homes were simply not built to meet today’s electrical needs, but these deficiencies can be overcome by hiring an experienced electrician. Santa Monica, CA building codes have changed over the years as well, and companies like The Electric Connection that specialize in rewiring older homes can bring your house into compliance with the latest regulations.

If your home was built during the 1960s and 1970s, you may be living in a fire trap. During that time approximately 2 million homes were built or remodeled using aluminum wiring before it was discovered that this type of wiring poses a significant fire hazard. The problem occurs at the electrical connection points where the wiring is spliced to connect to a switch, outlet or circuit breaker. Aluminum expands and shrinks in response to temperature changes, a process which can cause breaks and frays over time. The US Consumer Product and Safety Commission (CPSC) has expressed grave concern over this issue stating that homes with aluminum wiring are up to 50 times more likely to have a fire than homes with copper wiring.

How will you know if you need to have all of the electrical wiring in your house replaced? Fortunately, you may not necessary need a complete rewire in your home or business. A licensed electrician in Santa Monica can evaluate this for you, and tell you to what extent you’ll need to go in order to make your home safe. The Electric Connection, which specializes in house rewires explains that depending on the situation, there might be a fairly inexpensive solution. For example, you may simply need to replace the connection points in your home or business with copper electrical connectors. Not every Santa Monica electrician is trained in this type of retrofit, so you when you’re searching for electrician Santa Monica, it’s important to find a highly trained and fully licensed electrician to perform aluminum-to-copper retrofits.

Older homes, those built prior to 1950, may have a different electrical safety issue. During this time many homes used cloth insulated wiring, something which can appear similar to the insulated wiring used today. The danger builds over time; as the cloth ages it dries and can begin to flake off. Once portions of the wire are exposed, they pose a serious shock and fire danger.

Another challenge presented in older homes or buildings with cloth insulated wiring is that this wiring was frequently not grounded. At the time there were a limited number of electrical appliances and no home computers, so grounding was not considered a serious issue. Today all new homes are grounded so that excess electrical charges caused by electric surges are routed out of the house and into the ground, protecting electronic devices, computers and appliances. An electrician from Santa Monica can replace cloth insulated wiring with a grounded system, making your home and belongings safe from electrical fire and damage caused by power surges.

Another problem with older homes is the lack of three-prong outlets, something that is necessary for most modern appliances. Many homeowners mistakenly think they can simply purchase the three-prong version at the hardware store and swap out their existing two-prong outlets, but doing so can create additional fire risks. Properly swapping out these outlets requires some rewiring so that the three-prong version is grounded. Your Santa Monica electrician can do these quickly and inexpensively for you, and can make certain that any existing three-prong versions have been installed properly.

So how do you determine what type of electrical wiring is in your Santa Monica CA home? The first step is to check the build date. If your home was built before 1950, you can call the Electric Connection for a free electrical estimate by a licensed Santa Monica Electrician. They will be able to quickly evaluate any electrical safety issues that you might have in your home or business electrical system.

In this digital age, having a strong online presence is vital to attract new employees and clients. However, with a few simple tools, any residential or commercial electrical contractor can quickly and easily set up a website. They can also create advertisements and build an online brand. Digital marketing is now accessible to the masses.

Even with a proper website, social media profiles, and company listings, it can be difficult to be noticed online. This is where search engine optimization (SEO) comes in. This is a method of making your website appear in the top search results for a given search term. For example, if a user searches for “electrical companies in [your city]”, SEO will ensure that your website appears in the top results.

This can be a complicated process, so SEO experts exist that can handle this task for a fee. Otherwise, an active social media presence will boost your SEO, as Google and other search engines are able to gather and combine data from all over the internet. The larger your online presence, the more likely it is that your company will appear in the top results.

Digital marketing can be simultaneously simple and complex, but with these recommendations, any contractor can start building an online reputation. There are a variety of options to suit any size company. With the right ideas and good management, you can drive traffic, clients, and good employees to your business.