In case there is a flash flood or storm in your area or if there is a severe plumbing leak or pipe burst, that can result in flooding of water in different areas of your home. Water can cause a lot of damage to the installations and features on your property, and you would have to start the clean-up and repairs without delay. This is also when you start evaluating what can be salvaged and what would have to be replaced – and this includes your home’s wiring.

The wiring inside the walls can become dysfunctional and dangerous if it’s exposed to or submerged in water. If there is a severe flood, it becomes important to completely replace the wiring in your home. Not too many builders actually use wiring that’s rated for water exposure of this kind. Of course, not much can be done till the time all the flood water recedes and all the water has been cleared out from your home.

Even when all the water is pumped out from the indoor spaces, it’s best to shut down the electricity supply at the circuit box mains before continuing with anything. Call in your local electrician to test the wiring in your home. Even if it is still in a working condition, it’s never a good idea to use it.

The insulation can get degraded and that can raise the chances of an electrical fire in the future. In addition, when there are traces of moisture in the wiring, that leads to mould & mildew growth and the metal parts in the system can corrode. This is especially the case when the property has become flooded with salty water.

When it comes to rewiring jobs, you also have to factor in the cost of opening up the wall panels and fixing them. In instances of a flood, the walls are generally torn down right up to the framework. If you take this opportunity to upgrade the wiring in your home, you can save a significant amount of money.

Floodwater is never clean and that proves to be an additional hazard to the wiring and other installations in your home. Chemicals, oil, sewage and a number of other contaminants that come with the floodwater work their way into the smallest spaces, and this is why it’s best to just start afresh with the installation. In comparison, if your home’s wiring has been impacted by water from a burst pipe, you might be able to save these features; this is because it may not be fully-submerged in water.

However, it’s never a good idea to test the condition of the wiring yourself and you should call in a skilled and licensed electrician to thoroughly check and evaluate the installation and give their opinion. Regardless of whether the wiring in your home has got impacted by flood water or water from a damaged plumbing installation, it’s important to get it checked without delay. The professionals will provide suitable solutions based on the condition and location of the wiring.

We are a company that has been operating in this space for a number of years and have the skill, knowledge as well as the resources to handle this job in an expert manner. We can install and maintain all type of electrical installations on your residential or commercial premises. For more information, contact the Allround Electrical team at this number – 1300 169 263. Alternatively, you can write to us at our email address.

Thanks for reading,1300 169 263

Do you or does someone that you know have a Federal Pacific Electrical panel in their business or home? There are a number of reasons that these panels are unsafe, which means that they should be replaced as quickly as possible. One of the first reasons is simply because they are so old. Federal Pacific panels have not been installed in many years. The main reason that they should be replaced by your electrician in Los Angeles is because the circuit breakers in the panel may not always trip whenever they should. This can lead to some very serious issues with your home’s electrical system.

An Example

A couple years ago, one of our technicians were called out to inspect a circuit wire that appeared to have bubbled up. Whenever he arrived at the location, he discovered that this particular circuit had been overloaded so far that the sheath covering on the cable started to boil. Upon further inspection, he found out that the power for this particular cable came from a Federal Pacific electrical panel. What happened, was that the homeowner’s air conditioning unit was experiencing issues that caused it to seize up, continuously pulling more and more power from the panel. Rather than tripping like it should have, the circuit breaker remained on, leading to the boiling cable sheathe.

Although we were able to correct this problem relatively quickly, it could very easily have turned out much worse. This overloaded wire could have caught fire, or remained unnoticed and poorly insulated until it came into contact with a person or with another item that led to serious electrical shock or other injury.

The moral of the story is to have your home regularly inspected by a Los Angeles electrician for proper safety. For more safety tips or information about unsafe electrical panels, visit The Electric Connection at www.theelectricconnection.com.

For those of you with little ones running around the house, you know how difficult it can be to try to keep an eye on them at all times. Sometimes they can put themselves in the most peculiar situations that you just can’t control. To keep them safe you need to implement security measures, this is especially true when it comes to electricity. Here are some steps you can take to child proof your home from electrical hazards.

This is one of the number one ways to keep your child safe in the home. Their little fingers can fit just about anywhere and electrical outlets always seem to be the most enticing place to put them! Electrical covers fit over top of the outlet so nothing can be put into them. Place electrical covers around your home in all the electrical outlets that are low to the ground and places where children can reach. There are number of different covers you can put on electrical outlets. Make sure you purchase electrical covers that are tamper-resistant so you don’t have to worry about your child removing the cover.

When giving your child a bath it can definitely get messy. When the splashing starts water begins to fly and if it hits an electronic this can be dangerous. As we know, water and electricity do not go well together. Even appliances and devices that are turned off or unplugged can still cause electrical shocks if water contact is made. When you are about to bathe your child, make sure you clear the bathroom of any electronics that are near by. This goes for the sink to. If you bathe your child in the sink you can sometimes forget about the hairdryer or shaver that was left near by. Make sure you clear the countertop before you start running the water.

All our homes are full of electronics which each require their own cord. Especially behind the television and entertainment area there can be many extensions cords and power bars. Make sure that you keep these out of your child’s reach. If they start to pull on the cords and get access to the outlets and cables there are a number of dangers. Put barriers around these areas or tie up the cables out of your child’s reach.

These are just a few ways that you can protect your child from electricity in the home. Spend some time today to review your home and the potential hazards. Electrical hazards can be a hidden danger, if you need help protecting your children, have an expert electrician review your home. We can help to identify dangers and protect against them.