If you are upgrading your home’s electrical work for a renovation or remodel, then there are some truly simple ways you can elevate your new lighting to “wow” status, and now is the time to do so!

If your home is a bit on the older side, the best way to modernize is with new LED recessed lighting cans. The reason for this is simply due to the smaller nature of modern cans, which allow for a much higher ceiling than you may have. Areas like kitchens, for instance, very often have lowered ceilings to account for the room that antiquated fluorescent or recessed lighting needs to have. Today’s recessed lighting cans can fit in the space between the floor joists and the future drywall, allowing for the absolute maximum ceiling height, which immediately improves the feel of most rooms.

Do you have a dedicated entry to your home, such as a mudroom or enclosed patio? Nothing modernizes and simplifies these areas as easily as a motion-activated switch. In fact, these upgrades can be done after-market if your switch is positioned correctly using inexpensive switch replacements found at your local hardware store. The key here is that your switch has to be positioned correctly, often on the adjacent wall, which is often not the case. Otherwise, you will need to enter the room before the switch can sense your movement, which defeats the purpose in most applications. Planning for motion switches during the remodel can open up this possibility with ease.

Here is where we really get to go wild; a pressure switch may seem like a frivolity, but actually adds a great amount of value when used correctly. For instance, if there will be space between your upper kitchen cabinets and the ceiling, then adding in over-cabinet lighting creates an incredible effect; better still, piggybacking off of the circuit used for under- or over- cabinet lighting to create an interior cabinet lighting system is really not difficult to do at all. From there, simply add a pressure switch to your cabinet doors and voila, you’ve achieved a million-dollar home look for almost no extra cost if done when your other cabinet lighting circuitry is being installed. Similarly, if you’re able to reimagine your pantry with a closing door, simply put a pressure switch in the door frame that compresses when closed, turning off the light immediately, and depresses when opened to instantly turn on the light. It may not sound like much, but anyone visiting your home will be amazed by your ingenuity; plus, it takes almost no extra work to install, only requiring the switch box to be located on the corresponding portion of the wall and a small wire to snake through a drilled hole in the door frame.

The best way to achieve these and other inexpensive tricks for added value and usability is to partner with inspired electricians that are willing to make these types of suggestions. At Electrical Gurus, you’ll find the most skilled and dedicated electricians in Des Moines.

The lighting industry has been busy as ever this month, from the slow-climbing successes of LED adoption to the discovery of new galaxies. Have you kept up? Allow us to offer a taste…

It’s only a matter of time before LEDs make serious headway into the retrofit market. Forbes predicts that by 2021, LEDs will make up approximately half of all retrofits in a market where they currently only make up about 5%. Read more…

Cree and Home Depot recently partnered to offer more affordable LED light bulbs to consumers. Nasdaq predicts that Wal-Mart will soon follow, based on a recent announcement from GE about lowering the price of their Great Value LEDs (sold at Wal-Mart). Image via houzz.com

There is an art to proper bathroom lighting, and it involves a lot more strategy than you’d think! For one, this author adamantly believes you should not light a mirror from above because it casts unsightly shadows on your face. Read more…

1.  Size and install smartly:  Whether you are installing a crystal chandelier over your dining room table or as a central design feature in your master bedroom, the diameter and height of your fixture must be in proportion to other items in the room.  The diameter of a dining table fixture should be 12 inches less than the diameter of the dining table.  The height of the chandelier should allow for a clearance of 30 inches from table top to the bottom of the fixture.

Quoizel’s “Tricia” chandelier adds elegance to this contemporary dining room.  * Interior design by Sandra D’Amata International, Inc.

If your crystal chandelier will be a central focal point in your foyer, living room or master bedroom, take into account your ceiling height and choose a chandelier that may be installed to leave at least a 7-foot clearance from the floor to the bottom of the chandelier.

2.  Reflect Resplendence:  The true beauty in a crystal chandelier extends far past the light source, decorative finishing and crystal configuration.  Crystal facets reflect and refract a brilliant array of colors and illuminating effects, especially when combined with sunlight and/or electric light sources.  Matte finishes on furniture and surrounding walls work well with crystal illumination.  Avoid creating glare and unflattering shadows off metallic or shiny surfaces.

3.  Choose the Right Bulb: Most chandelier bulbs will be candelabra-based, yet what type of candelabra bulb you choose will make a tremendous difference in both the total presentation of your chandelier and the overall illumination in your room.

Crystorama’s “Mercer” chandelier–installed with dimmable LED candelabra bulbs–provides magnificent illumination in this master bathroom.*

Frosted bulbs provide a more subdued illumination. They are recommended for most traditional dining room chandeliers.  Clear bulbs work well with chrome finished retro-modern chandeliers and may add to the radiant sparkle of modern crystal chandeliers.

For a more traditional look, flame tip bulbs are the right choice.  Flame tip bulbs also look best in chandeliers with faux drip-candle holders.  Torpedo bulbs are less tapered and present a contemporary look.  Round bulbs add an eclectic vibe to a traditional chandelier.  Uniquely-shaped and/or textured candelabra bulbs may add a custom-designed artistry to your chandelier.