If you are renovating or updating your kitchen, one common kitchen addition you might be interested is a garbage disposal unit. This little unit sits in your sink and allows you to shred food that you would not normally fit down the drain. This can be a handy appliance, however it may introduce the threat of electrocution into the environment, as water and electricity don’t mix well. If you are looking at having a garbage disposal unit installed in your sink, have one installed safely.

The garbage disposal unit is installed into your existing sink pipe. In order to power the unit, you will require a 120-volt GCFI (ground-fault circuit interrupter). This means that you will need an outlet under your sink to plugin into. If one is not available you will need to have it installed. Often, other appliances may already heavily load kitchen circuits, it is important to check the load on that circuit before installing a new electrical outlet. If you are not careful, every time you run your garbage disposal you could cause the breaker to trip and lose power to your toaster, microwave, or refrigerator.

At times disposal units may need maintenance, become clogged, or break down for some other reason. To identify the problem you may need to open up the sink or motor to get to the part that you need access to. Before you begin any work, shut down the circuit that the garbage disposal is on and unplug the unit. This will not only keep your fingers safe from the motor activating unexpectedly, but it will also help you avoid an electrical related accident. If you start to take apart the pipes and water begins leaking there is a big risk of electrical shock. If you are not familiar with the plumbing or electrical work of the garbage disposal, leave it to a professional. You may think it is a simple job, but one mistake can be costly.

Before having a new garbage disposal installed, inspect your sink and pipes for any leaks. If these leaks make contact with exposed electrical wires or outlets there is risk of electrical shock. If you are not familiar with the plumbing or electrical work involved in installing a garbage disposal unit, call an expert. Our licenced electricians can ensure that your kitchen circuit can handle the unit and install a new electrical outlet.

I have a great deal of interest in digital photography, but my life is as crazy as anyone else’s. My son, family, and work keep me busy from dawn to midnight every day. I’ve never had time to cultivate any photography skills, even though I’ve always been very interested, sitting on the edge of my seat, if you will, for a chance to take some digital photos in order to learn a little about how capturing light can create astonishing works of art.

My interview with Matthew Danser had given me my long sought “excuse” to try out some photography techniques. But it also required that I put in an honest effort. The thought in the back of my head: These photos are going to suck. Probably a lot. And they will most likely be seen by the thousands of people who visit this blog monthly. Second gulp.

But I’m the kind of person so riddled with ADHD that even my paranoia about being judged on a mass scale can only last about three minutes before the audacity to try anything resurfaces and action is taken. So here’s what happens when a total amateur who has no idea what he is doing tries to “Paint with Light.”

A one-dollar flashlight from – you guessed it – the Dollar General. One dollar. Even. Gotta love it. Especially since it’s all I could afford, seeing as how I’m still paying off the aforementioned Nikon that I bought to take photos of our baby son. (True, a million pictures have been taken of him during his first year-and-a-half on Earth. However, 999,999 of those photos were taken with an iPhone. Go figya.)

THE PLAN, STAN:

The plan was to wait until it was dark in the apartment and do some light painting. I knew that I could use the Shutter mode on my camera to set it to take exposures of up to thirty seconds. I saw that my camera also had an option for bulb release, so, invoking Danser, who recalls how his girlfriend had to hold down the button on his camera for a full thirteen minutes, I determined that if I asked really nicely, I might be able to persuade my wife to hold down the trigger to get exposures longer than thirty seconds. Otherwise, thirty seconds was my window of time to do all the light painting I could.

I started off pretty timidly. I had seen photos online in which people used long exposures to create squiggly lines. The most popular examples are pictures of traffic at night, headlights and tail lights streaming, giving you a sense of the fluid motion of busy intersections. You’ve also seen those nature pics in which streams and rivers and clouds and stars become gauzy with movement because of long exposures.

But what I really like about Danser’s work is the use of color. The effect of running inside the hut and popping off red-gelled flashes shown at the beginning of this blog post (Matthew Danser! And happy lightpainting, everyone!

Many Pittsburgh natives fondly recall the weather beacon atop the Gulf Tower with its flashing neon lights that indicated the weather forecast. The security guard in the building’s lobby would read the weather report in the local paper and switch the lights to red or blue, solid or blinking.

However, this six story pyramid’s neon display used as much energy as 24 homes, and during the energy crisis in the ‘70s, Gulf Oil decided to turn off the lights. When the crisis was over, the lights no longer worked.

Fast-forward a few decades: the building’s owners, inspired by the Empire State Building’s LED displays, decided to reignite the much adored landmark. With new LED technology, the award-winning lighting duo Chris Popowich and Cindy Limauro have enhanced the tower’s former glory with 730 foot-long strips of LEDs that can dazzle in a rainbow of colors.

The newly named KDKA-TV Weather Beacon usually provides a detailed weather display of Pittsburgh’s current conditions including temperature, precipitation, humidity, and wind speed:

Now that you have the holes for lamp sockets, we need to start wiring the lamp sockets.

Kevy, an eCommerce Marketing Automation ​company that specializes in automating and personalizing the shopping experience. ​ ​​Kevy gives online retailers the tools they need to help visitors find the products they care about most. When she is not at Kevy, Brooke and her husband Ryan love creating new projects and are always looking for a new DIY opportunity around the house.