A safety switch is essentially a device that very quickly switches-off the electricity in case any electrical fault is detected. In effect, it reduces the risk of injury & death caused by contact with electricity. Current day safety switches are very different from the ones used even up until a decade ago. Today, it’s mandatory to have these installed in buildings where any kind of electrical addition or upgrade has taken place.

Apart from this, safety switches are also needed for power outlets that that supply electricity to mobile homes like caravans etc. It’s not mandatory to have these safety switches in older homes; however, the recommendation is that you should consider getting them installed. It is one of the most effective ways to protect your family & yourself from electric shock.

ELCBs or Earth-leakage circuit breakers are safety devices used to prevent shock in electrical fixtures which have high Earth impedance. The current installations use the circuit breakers that directly detect leakage in current. Here are some features of an ELCB:

RCDs or RCCBs are essentially modern electrical wiring devices which quickly disconnect a circuit if they detect that there is an imbalance in the current between the energized conductor/s & the return conductor. They are designed to immediately switch-off the electricity supply when the electricity leaking to earth is detected to be at harmful levels. These devices offer very high levels of protection from electric shock.

Voltage Earth-leakage circuit breakers were first introduced around 60 years ago, while the current ELCBs were launched only around 40 years ago. For a very long time, voltage-operated ELCBs & differential current-operated ELCBs were both called ELCBs; this was because it was a far easier term to remember. However, as expected, this common name caused a significant amount of confusion within the electrical industry.

If someone accidently used the wrong one in a particular application, the installations may not get the kind of protection it needed. It was to eliminate this confusion that the International Electrotechnical Commission decided that the differential current-operated ELCBs will be termed as RCD (residual current devices). Any current that’s over & above the load current is referred to as the residual current.

ELCBs have a number of disadvantages such as:

Today the RCD is preferred means of providing effective shock protection. The term is also most widely used across the globe.

For more information about RCDs and the best electrical solutions, call Allround Electrical at 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

The electrical field is one that has seen a number of remarkable discoveries over the decades. One very important lesson has been the aspect of grounding of electrical currents. It’s true that we need electricity for almost everything in our daily lives and can’t even imagine a world without it. However, it continues to be one of the most dangerous elements on earth. If you haven’t already properly grounded your home’s electrical systems, you are taking a significant risk by not doing so.

Every electrical circuit has an active wire which supplies power; there is also a neutral wire which is responsible for carrying the power back. There is a third wire (grounding wire) that can be attached to the power outlets & the electrical appliances and devices; this wire is connected securely to the ground in your breaker box.

This third wire is the additional path that the electrical current can pass through to be safely returned to the ground, in case there is a short circuit; this prevents any harm being caused to anyone. In the event that a short circuit occurs, the current flows through into this grounding wire and it’s when you notice a tripped circuit breaker or a blown fuse in the electrical main board on your property. If this wire hadn’t been grounded, it would have resulted in a fatal shock.

This is one of the most important reasons to ground electrical currents. It’s the best way to protect your family members from electrical surges when they are operating any electrical appliances in the house. In case a lightning strike causes an electrical surge on your property it can result in extremely high electrical voltages in your system. When the wiring has the proper grounding, all the excess electricity gets diverted into the earth, rather than burning everything that’s connected to your electrical system.

When your installation is grounded, it becomes very easy for the power to get directed exactly to where you need it; this allows the electrical currents to efficiently & safely travel across your home’s electrical system.

A properly grounded system makes it much easier for the power to be distributed in the right amount to the right places. This plays a significant role in ensuring that there is no overload in the circuits. The earth becomes the common reference point for all the different sources of voltage in an electrical system.

One of the primary reasons why grounding is extremely effective in keeping you safe is because the earth is an excellent conductor, and electricity always takes the path that has the least resistance. When you ground your electrical system, you are giving it a path that it can easily take, rather than into you; this can potentially save your life.

If your home’s electrical system isn’t properly grounded, you are just risking the appliances and equipment that are connected to your system, being burnt beyond repair. If the situation gets out of control that can also result in a fire risking your property and causing physical injury, sometimes even death.

If you aren’t sure about whether your electrical system has the right grounding, its best to call in a reliable local electrician to get it checked thoroughly. We at AllRound Electrical will check the system carefully and check it for any other potential faults as well. For more information, contact our friendly team at this number – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

The importance of properly functioning electrical panels can’t be understated; if you haven’t recently, then the time to get your home’s electrical panels checked out is now. With fall just around the corner, energy usage in Des Moines’ homes will begin to rise exponentially as homeowners spend more time indoors and rely more heavily upon heating systems. The last thing you want in the middle of fall or winter is an electrical panel acting up, failing you, or even possibly endangering your family.

These days, our homes are only a small step away from being a large computer. Like any computer, the motherboard and power supply serve a vital purpose in powering and joining all systems; our homes aren’t much different, but the electrical panel represents both of these vital components. This means that if your electrical panel is broken or old, the various electrical systems you enjoy throughout your home will fail to work or become unsafe. By keeping your electrical panel in properly working order, you secure your home’s ability to grow with your family.

Your home cannot unendingly add electrical applications, as nice as that would be; instead, your home’s maximum output is determined and limited by your electrical panel. This means, if you’re planning on extending your home or adding large electrical appliances, you should absolutely consult with a licensed electrician to find out how eligible your panel is for accommodating the new output. Even if your system is under its maximum potential output, it may be advisable to upgrade your panel to enjoy uninterrupted service; always be sure to contact an electrician for any output questions or concerns.

While having an older electrical panel isn’t necessarily bad, there are a few things to watch for; older panels can carry innate risks that can be easily avoided by upgrading your electrical panel. If your home’s panel still uses fuses (not flippable circuit breakers), then you should definitely get it upgraded right away. Likewise, if your panel is from a proven-to-be unreliable brand such as Federal Pacific of FPE, be sure to give us a call at 515-446-7040 right away for assistance. Even semi-modern panels feature flippable circuit breakers, which reliably protect your home and appliances from dangerous surges. Keeping your home safe is our electrician’s primary concern, and ensuring your electrical panel is within a safe parameter is certainly part of that.

If you’re looking to grow your home’s living space, add electrical improvements inside or out, or are worried about the safety and security of your current electrical panel, then be sure to contact our licensed, bonded, and insured Des Moines electricians today. We have the skills and expertise necessary to safely and effectively upgrade your home’s electrical panel or advise against it if an upgrade is unnecessary. Electrical Gurus is proud to provide local service you can trust, get in touch with us today for details!

Bulbrite Lightbulbs – from LEDs and CFLs to halogens and colorful novelty lamps – Capitol Lighting’s 1-800lighting.com is proud to present quality lamps from Bulbrite Industries.  Bulbrite is a leading manufacturer and supplier of innovative, energy-efficient light source solutions. Founded nearly 40 years ago, Bulbrite is a family owned business renowned for its commitment to innovation, education and new technology. The company has introduced and designed award-winning products, including its exclusive KX-2000®, Halogen R111 GU10 and LED MR16.

Capitol Lighting Provides Top Quality Lamps and The Best Light Bulbs…. and We’re not Screwing Around!

Compact Fluorescent Lights (CFL) and Light Emitting Diode (LED) bulbs have revolutionized energy-efficient lighting.

CFLs are simply miniature versions of full-sized fluorescents. Newer CFL bulbs provide a warmer illumination similar to that of common incandescent and they provide an attractive alternative adaptable to most standard lamp sockets.

LEDs are small, solid light bulbs, which are extremely energy-efficient and durable. New LED bulbs, grouped in clusters with diffuser lenses, have broadened the applications for LED use in the residential home environment.

You may never have to change a lightbulb again, with the unsurpassed quality, energy-efficiency and long-lasting illumination from Bulbrite. Celebrate superb new lamping options from Capitol Lighting and enjoy the best illumination for years to come.

Capitol’s Guide to Lamping Options for Best Illumination:

For more information on the latest lighting applications and the best light bulbs, visit with the lighting experts at Capitol Lighting.  Take advantage of outstanding service and value on the finest in home lighting and accessories at 1800lighting.com.

Enjoy Capitol Lighting’s “Oktobulbfest” with grand promotional values on the best light bulbs from Bulbrite Industries.  Stock up and save on select bulbs for a lifetime of illumination.

At Capitol Lighting’s 1-800lighting.com you will find over 1,000 different lightbulbs from your average incandescent A Lamp, to your color corrected compact fluorescent. Capitol Lighting offers the best in quality and service to satisfy all your lighting needs!

What’s Working Today:  It’s All about Compatibility.

With the lightbulb market and technology boom, it may be overwhelming to choose the correct lamps to illuminate your home for maximum efficiency and according to your style.  However, with a little bit of wisdom, you may see the light and choose the best light bulbs to satisfy your decorative and functional needs.

Know the lighting lingo:

Know the lightbulb basics:

Light Emitting Diode (LED) bulbs are the most recent addition to the residential bulb market. These lamps use 80% less energy than incandescent and last up to 50 times longer.  Excellent for task lighting, night-lights, and outdoor applications, they are more expensive than most lamps, but their durability, long life, and energy-efficiency will save you money in the long run.