Lighting is a critical aspect in a number of industries such as manufacturing, mining, marine, packaging, and even sports. Electrical fixtures for such industries are designed for heavy duty performance and can last even in the most adverse conditions such as extreme temperatures and climate.

Apart from ensuring proper lightening and enhancing the output, electrical lighting also helps in maintaining safety in your workplace. If you have a well-lit work space, then your workers can avoid unwarranted accidents like stepping on sharp tools, bumping into equipment, etc. You can use a wide range of electrical light fixtures such as LED, magnification lights, fluorescent lamps, halogen machine lighting, etc.

You must choose the right light fixtures based on the environment you work in and the lighting demands of the space where you need to install them. Let us look at some industrial lighting fixtures that are available.

5 Types of Industrial Lighting Fixtures

In industries like mining, transportation, steel, marine, etc., there are high risks of explosions which you cannot overlook at any cost. You have to make sure that the lighting fixtures have the ability to withstand the heat and pressures that are generated by an explosion. Explosion proof fixtures meet some of the most stringent quality standards of the National Electric Code.

Indoor fixtures can be installed in a number of indoor work areas like workshops, workstations, bays, etc. As different work environments have different requirements for lighting systems, it would be ideal to contact a supplier who can offer you customized lighting requirements. Ensure that the lighting systems are capable of withstanding harsh working conditions as well as extreme temperatures.

Roadway fixtures are ideal for places where you need high mast lighting. Safety is extremely important on the roads and is of major concern for the protection of all those present on the road, which is why you need a brightly lit road. You can control the amount of light generated by these roadway fixtures to make them brighter or dimmer, based on the time of the day they are being switched on.

Every sports ground requires proper lighting. It isn’t a pleasant experience for the spectators when they can’t clearly see what’s going on in the ground/field and it would equally hinder the players from performing well if the lighting is compromised. Regardless of which sport it is, be it tennis, football, cricket, basketball or rugby, flood lights are an indispensable part.

Places like nuclear plants, mining fields, oil rigs and underwater operations require high quality and failure-free lighting solutions. It is important that there are various kinds of light sources as well as lights so that the work doesn’t halt due to lighting failure of any kind. Ideally, you must not use regular industrial lighting fixtures in such places. Make sure the lighting you use are reliable, have a long life and have low maintenance costs.

The energy consumed by a single building or business can prove to be a huge overhead cost, especially for those buildings of a much larger size.

Starting the initiative to reduce energy consumption is becoming more and more common as the benefits become more and more clear. The benefits of reducing energy consumption is often times for one major reason, and that is to reduce overhead costs. By making switches (such as those listed here), you could realize a 50% or more reduction in overall energy usage in your facility.

Sound interesting? Learn how you can do that with the tips below…

Whatever lighting technology you have right now, if it isn’t LED, then you are probably consuming more energy than you have to be when it comes to your lighting system.

By converting to LED from a technology like fluorescent, you will easily realize a 30% reduction (on average) in energy consumption from your lights. Now, if you have lights such as metal halide or HPS (often used outside or in high ceiling lights), then you could realize even greater savings (by up to 75%)! This, in and of itself, can prove to be a major way to reduce energy usage in your buildings.

facility manager is, but it’s just a fact. Think, who knows more; someone who works with all the equipment everyday or someone who overlooks said worker? Probably the former, and that’s okay! But, just remember to ask them to be on the lookout for things and get them on-board with your efforts to reducing energy in your building. It will help a lot with your efforts!

Planting save energy in your building, but they are definitely the huge players that eat up a lot of energy. By changing just these 9 things, you will be able to put your efforts to the highest reward type initiatives.

Once you’ve switched these major energy consumers, you can then work on smaller areas of your building that are inefficient, just not as much as these 9 things.

What is one thing not listed here that you find to be a huge energy consumer? Comment it down below so we are all aware of it!

There are instances where NEC and other regulators recommend dedicated circuits for certain loads. Typical loads to put on individual branch circuits include sensitive electronic equipment such as computers. In addition, water heating systems, large appliances, and other high capacity loads that zap power require a dedicated circuit.

Run cables all the way to the main service panel and avoid connecting to other existing circuits. The same conductor size should be used throughout the branch circuit.

Electric water heaters, HVAC equipment, hot tubs and other appliances should each have a nearby disconnect that is easily visible and accessible. The power disconnect can be provided by the main or sub panel breaker, a dedicated switch, or a power cord that can be unplugged.

The branch circuits should have adequate current carrying capacity, adequate and grounding.

Typical branch currents include:

Having a hot tub or spa at home is a wonderful amenity. But before you have the ability to sit back and relax, there can be a lot of headaches. Proper preparation is required before you position the hot tub and plug it in. Here are a few things to keep in mind when planning your hot tub or spa installation.

You probably have an idea of where you would like to place your hot tub. If you are planning to build a place for it outdoors, ensure that you have:

Keep in mind the warranty of your hot tub. Some bases can void the warranty and the material of surrounding walkway, such as gravel, can track more debris into the hot tub.

For an indoor spa, ensure that the room you have chosen is suitable for the conditions. You will require a strong foundation as well as suitable ventilation for the steam and moisture.

Before starting a deck, support structure, or upgrades to a room in your home, check with your municipality that you are able to complete the improvements. You may require permits and there may be codes that your new structure must meet in addition to the manufactures’ warranty. Building illegally can cost you more in the long run.

This is where a certified electrician is important. Most hot tubs require approximately 240 volts. A hot tub does not plug directly into a standard outlet like other appliances; you will be required to add an additional circuit breaker into your main service panel. This can be a complex job and should be done correctly to keep your family and home safe. Improper electrical wiring can cause electrical surges and fires.

Recently, the Obama administration adopted a new gas mileage standard for cars made in America — 54.5 mpg by 2030. That’s a big jump. The most recent figures — 2009 — show that average gas mileage for American cars manufactured in that year was 33 mpg.

Well, the new standard is good for reducing dependence on foreign oil and good for our pocket books — it’s supposed to save us $45 billion annually at the gas pumps. It’s probably also good for American competitiveness in export sales — people in other countries seem even more concerned about gas mileage than we have become. The 2009 cars we imported got 35 mpg, 2 miles better than American-made.

Most Americans support the idea of upping gas mileage. Consumer Reports found in a recent survey that 77% of Americans feel that Detroit should produce more fuel-efficient cars and the government should increase mileage standards. So, everything’s good….

BUT wouldn’t it be better to run our cars on ZERO gasoline? Wouldn’t it be better to go electric? I’m not talking about the government telling Detroit to manufacture only electric vehicles (EVs). But when we buy our next car, if we made it electric or hybrid, we would be asking Detroit to manufacture the kind of cars that emit zero pollution and don’t eat any Middle Eastern oil.

You might be thinking — yes, but where does the electricity come from? That’s a good point, but here’s the neat thing about electricity — it can come from clean sources. In Los Angeles, 40% of the electricity supplied by the Department of Water and Power is generated from coal — not clean. But that means that 60% is generated from cleaner sources like natural gas, hydropower, nuclear, geothermal, wind, and solar. DWP expects that by 2020, 0% will be generated from coal and 40% will be generated from renewables. Those are the facts about electricity in L.A. — and, I assure you, my being an electrician doesn’t give me any bias on the subject!

My next car will be an EV. In the meantime I’m lending my support to the cause by installing EV chargers for those in L.A. who are beating me to it and have already bought their electric cars.

Click here to read more.