Landscape lighting can add beauty to your home as well as provide increased safety on your property.  Lighting design can be used to light pathways, highlight your homes architecture, and deter intruders.  When considering adding lighting to your landscaping, it is important to find the right balance of lighting.  Focus on adding lighting to main activity areas like driveways, entrances, pathways, dark areas around windows, and stairs and main focal points such as fountains, trees, or statues.  The following landscape lighting basics can help make the most of your lighting.

Up-lighting: Up-lighting is placing a light facing upward toward an object to illuminate it.  This works well for highlighting the focal points of your landscape or home.  Use it sparingly to highlight objects around your yard like statues, trees, flag poles, and fountains.

Down-lighting: Down-lighting is used to illuminate large areas.  It works well for illuminating entertainment areas such as a patio or a deck.  It also helps to deter intruders.

Accent Lighting: Accent lighting is an excellent choice for lighting paths and stairs by placing lights along both edges of a path or a staircase.  This looks beautiful and has the added safety feature of helping prevent people from tripping and falling.  Accent lighting can also add focus to low-lying flowers, shrubs, and ponds.

Click To Tweet

This issue almost exclusively applies to instructions on how to safely repair it.

The average rated life of a light bulb represents how long it took for half of the bulbs to fail during testing (given perfect conditions). If your bulb lasted 12,315 hours (you counted!) but the label touted an average rated of life of 20,000 hours, you’re actually still within range of an acceptable life span.

We measure LED bulbs a bit differently since they never technically burn out, but rather fade over time. Instead, the Lighting FactsTM label indicates LED lumen maintenance (LM), which is an estimate of the bulb’s lumen depreciation over a given time.

Solution: Understand that the expected lifespan of your light bulb is simply an estimate based on testing that was performed in a controlled environment. When a bulb burns out earlier than that estimate, it doesn’t always mean something is wrong with it.

We all like using lights that we have collected over the years, but along with this also comes a great deal of responsibility. Please check any Christmas lights or decorations, such as wreaths, that light up for before they are used. The plastic or glass that surrounds the light should be intact, and should not contain any cracks or breaks. Please inspect the wires for tears fraying or damage.

If lights are being plugged in outside on the trees, roof top, doors, or driveway make sure you have enough electrical outlets. Do not overload your outlets and use only ground fault outlets as this will help to keep your lights and yourself safe, as they will most likely be exposed to wetness and moisture. Also make sure your extension cords do not become a tripping hazard.

When choosing a real tree, make sure it’s not too dry and not close to any candles. Christmas lights can be used to decorate real and synthetic Christmas trees. Lights should be in their best condition before being placed on the tree. Turn all Christmas lights and decorations off when you leave the house or go to bed to avoid electrical fire. Don’t use electrically powered ornaments or lights on metal decorative trees or decorations as the sharp edges may cut the cord and cause a shock and fire hazard. Due to heat danger keep your tree 3-4 feet away from fireplaces, electric heaters and floor registers.

4. Christmas “bubble” lights were popular in the 1950’s and contain coloured liquid. These should be kept away from children, as the covering of the lights can be broken, and children may attempt to drink the liquid inside. Strings of lights should be kept tucked away or taped to walls so that children cannot easily pull the cords and injure themselves or damage furniture.

5. LED’s are much more energy efficient and give off almost no heat. LED lights help protect from overloading outlets they are much safer and you can use more of them with the same available power source so your home will look like a Christmas wonderland!

If you’re building a new house, getting the wiring installed correctly is essential to its long-term health and to ensuring proper operation—so it’s important to hire the best electrician for the job. Enlisting a quality electrical construction service will ensure that everything is installed properly and safely so that your home will run smoothly for many years.

A new construction electrician is a certified electrician who has taken courses and training on new building codes and new technology as it relates to circuits and wiring. Setting up your circuits correctly for the first time is much more complicated than simply adding a new receptacle or circuit. It’s important no one circuit carries too much of the home’s electrical load.

An experienced new construction electrician will consider all sources of major energy usage, such as the location of your refrigerator and washing machine, to ensure circuits are well spaced out and installed in the best locations.

To make sure that you get the right electrician for your new construction project, look for the following:

At Kolb Electric, we know how important it is that your home be wired correctly from the very beginning. That’s why we hire only the most skilled licensed electricians to work on our clients’ homes. Whether you’re a builder or contractor looking for an electrical partner in the DC area or a homeowner handling the project themselves, we can help with any new home wiring project, no matter how complex.

To learn more about hiring a new construction electrician for your Maryland, Northern Virginia, or Washington, DC project, call us at 877 287-1179. We’ve been helping Mid-Atlantic builders and homeowners with their electrical needs since 1925.