There are plenty of reasons to install new indoor light fixtures in your home. Perhaps you want to update your interior aesthetic, or save energy by upgrading to efficient LED bulbs. Maybe you even want to bring your lighting into a smart home control system. Although wiring a new fixture is usually a simple job, complications can crop up if your home still uses an outdated wiring system. In order to comply with your local building code, you may have to perform some extra electrical work to ensure the safety of your new fixture. Read on to learn more.

Bringing Older Electrical Work Up to Code

If your home still uses knob-and-tube wiring, the law prohibits connecting new light fixtures to the old wiring. You don't have to replace the entire wiring system itself, although that’s not a bad idea, because it can reduce your risk of an electrical fire and lower your insurance rates. Even if you don't have the time or money for such extensive electrical work, though, you can remain in compliance with your local code by installing an electrical box between your wiring and the light fixture.

You can purchase an appropriate electrical box at most local hardware stores – but make sure you verify that it is designed to meet local code guidelines for installing new light fixtures. From there, after you turn off the power to the room, you have to cut a hole in the wall where you want the fixture to go, large enough for the box to fit. If you're lucky, the fixture will be near a stud or part of the frame so you can mount the box easily. Otherwise, you have to cut the wall extremely carefully to ensure you leave enough lath and plaster keys to support the box.

Wiring the New Light into Place

Next, once the box is ready to be installed, follow the manufacturer instructions to clamp in the home wiring to the back of the unit. You may have to add a ground wire as well, depending on the specific scenario. Anchor the box using metal supports, and when it's all in place, connect the light fixture. When everything is securely connected, you can turn the power back on and give your new light a trial run.

Remember, knob-and-tube wiring can be a fire hazard, and performing electrical work in general can be dangerous if you don't know what you're doing. If you have any doubts or questions about installing your new light fixture, the best route is to have a professional electrician give you a hand.

Expert Assistance with Your Electrical Work

For assistance with all your electrical work, including installing new light fixtures, contact a qualified residential electrician today.

Lights are one of the greatest things about the holidays. You’ll find them in trees, colorfully decorating home exteriors; you’ll even find them on vehicles. And honestly, we love it. Lighting is one of the keys to the spirit of the season and an integral part to this time of the year. But, as we’re all well aware, they aren’t exactly the easiest thing in the world on your energy bills.

Looking for ways to keep your holiday lighting costs at a minimum this year? With more than 25 years of experience and knowledge, we can give you a hand! Sit back, relax, and let the certified electricians at Hoffman Electrical show you some quick and simple ways to lower holiday lighting costs!

For you to be able to ensure that you get the best possible job done in your home, you should limit your options among contractors that will be able to take the best possible care of your home systems. Even if highly skilled professionals tend to ask for higher fees than their other counterparts, there is no doubt that spending your money on their services will be worth it. Here are some points that you should keep in mind as you go about looking for the contractor who you will hire, to ensure that you will receive high quality services in your home.

The first thing that you have to check out when you hire contractors to carry out electrical repairs in your home is the amount of experience the employees of the company can boast about. Obviously, you need to find a contractor company that hires mechanics that can carry out the repairs that you need. There are a lot of resources that you may use to find the best mechanics in your area, so you need to make sure that you go through as many of them as possible.

It will do you well to do a run over on the variety of electrical repairs that a certain contractor company offers as well, before you go on to negotiating their working terms. Obviously, you want to find a company that will be able to implement every single repair that you need in your home. Hiring contractors that can boast of a wide range of skills will be best for you, because there will be no doubt that they will know everything that is important in their field. Yes, they will tend to have higher professional fees, but rest assured that you will receive high quality services as well.

Finally, make sure that you hire contractors who will be willing to work within the kind of budget that you have set for the electrical repairs that you need for your home. While it may be a fact that high quality services tend to go for higher rates, this does not mean that you have to shell out an arm and a leg for them as well. Look for a company that will be willing to give you discounts, in exchange for you having all the services that you need carried out by its employees. This way, you will get your house in tip-top shape without breaking the bank.

Light switches are so common we rarely think twice about them. We walk into a room, flip the switch without looking and carry on. In the middle of the night or first thing in the morning, the light that comes on in an instant is a bit of a shock to eyes that have not quite adjusted. Lights are often a little too much for certain occasions and you are forced to choose between too much or too little. Or are you? Your California electrician has a better idea. The team at The Electric Connection can help you take control of the light in your life by installing a dimmer switch.

For a long time, dimmer switches were a common feature for chandeliers installed in the dining room area. This allows you to dictate just how much light you want to shed over the dinner table. Cheery breakfasts and lunches are best served with plenty of light. Evening meals that are meant to help you unwind or connect with your friends and loved ones over a delicious entree are best served with low light. It gives the space a more intimate feel.

You can have that same luxury of light control in every room in the house. There is some very minimal electrical wiring that will need to be done. It is a fairly easy switch to install a dimmer in place of your existing light switch. You can have one in the living room that allows you to turn down the lights while you are watching television. Another in the bathroom gives you the ability to have low light for those middle of the night visits instead of blinding light that wakes you up and interrupts a good night’s sleep. An electrician in southern California is ready to help. Just give The Electric Connection a call today and schedule your dimmer switch installation.