Adequate surge protection does not begin and end with point-of-use power strips. Multiple layers of protection are necessary to safeguard your sensitive appliances and electronic devices. You’ve invested a great deal of money in them - now you need to protect them.

Whole house surge protection, installed between street power lines and your home, or between your meter and breaker box, offer your appliances the protection they need against today’s common but unexpected spikes and surges. Diverting excess power to ground, these devices protect both your electronics and your wallet from the dangers of spikes and surges that could leave you with smoking gear and a hefty replacement bill.

Because a whole house surge protector cannot handle 100 percent of surges, you need backup. That’s where point-of-use surge protection devices with power conditioners come in. Installed at individual outlets in your home, these devices also shed excess voltage through ground in the event a spike or surge overcomes your whole house surge protector. They also have the added benefit of noise filtering. There are two types: less expensive models that are destroyed internally – but preserve your gear – in the event of a surge, and more expensive models that can handle all but the most extreme surges without destruction.

Have you ever been watching TV or listening to the radio when someone in an adjacent room operates a blender or vacuum? Oftentimes the result will be static on your TV or an annoying buzz emitting from speakers courtesy of “noise” transmitted through the electrical lines in your home. That’s where a power conditioner comes in.

Those cheap $20 power strips from your local retail store are not the same as a surge protector with a power conditioner. While cheaper, this is definitely an instance where you get what you pay for - a couple extra outlets and some minor surge protection. In the event of a major event, however, they can fail your appliances and sometimes catch fire. Premium, point-of-use surge protection with power conditioning not only adequately protects your appliances from surges, but also:

Protect your gear and run at peak performance with help from the perfect team. Have surge protection and power conditioning equipment installed in your home with the help of Mr. Electric® today.

Home fires devastate hundreds of thousands of families each year. In 2015 alone, there were 1,345,000 fires reported in the United States, resulting in over 3,000 deaths and 15,000 injuries. Among the most common causes of fires are kitchen stoves, faulty wiring, lighting, clothes dryers, and candles. Monday marked the beginning of National Fire Prevention Week, and because we’re committed to ensuring the safety and peace of mind of home homeowners, we’re going to spend this week helping you safeguard your home against a possible fire.

It’s essential to note that you can’t prevent 100 percent of fires; however, there are certain measures you can take to significantly reduce the possibility of one. The most important thing you can do as a homeowner is always be proactive and vigilant. We’ve put together what we believe to be the most important tips you can follow for fire prevention.

Electricity is something we can’t manage without, but it’s crucial to take due care while using it. When it comes to electrical safety, you can never be too careful, and it’s important to ensure that the electrical systems, wiring, fixtures and fittings in your home have been installed by a licensed and insured electrician.

The same level of care has to be maintained when you are using any electrical appliance and you must ensure that you don’t overload the system while operating any of them. It’s very common for people to use extension cords in their homes and not many property owners feel these electrical accessories should be included in their safety checklist.

If an extension cord is used continuously under the wrong conditions, it can potentially lead to electrical shock or even an electrical fire. We have put together a few extension cord safety tips:

The other important thing you should keep in mind is that you should never join two or more extension cords together. This can be very dangerous because that can cause a drop in the voltage in the cords; this reduces the effectiveness of the circuit breakers and safety switches in your home; in turn, this can result in an overload.

If this occurs, the strength of the actual current that’s flowing in the cords can damage appliances which can create a fire hazard & potentially cause electrocution. While an extension cord can be quite helpful in effectively delivering power to points where you need it; never forget that using an extension cord is just a temporary measure and shouldn’t be used to provide permanent power.

Some would argue and say that they have been using extension cords for years without any trouble; however, that doesn’t really mean it won’t compromise the electrical safety in your home, when you plug it in the next time. If you find you are using too many extension cords around your home, it’s an indication that there aren’t enough power outlets in your home, to cover your needs.

It’s best to call in an electrician, discuss your electrical requirements and get them to assess whether the existing installations meet them. For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of CBUS installations. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

hazardous location lighting.

The National Fire Protection Association (NFPA), National Electric Code (NEC) 70, defines hazardous locations through a system of classes, divisions or zones, and groups that products must be labeled as to be used in those areas. Hazardous area classifications are based on the general type of substance or material that is present in the area, the likelihood that it exists, and more detailed specifics, such as ignition temperatures and combustible properties.

Class I:

A Class I hazardous location contains flammable gas, liquid-produced vapors, or combustible liquid-produced vapors that can be present in quantities large enough to create an explosion.

Typical locations include airplane hangars, vehicle paint shops, commercial laundromats, and gas plants.

Class III:

This type of location contains easily ignitable fibers or flyings in the air but that aren’t likely to be in suspension in amounts large enough to cause an explosion.

Typical locations include textile mills, cotton mills, and sawmill facilities.

explosion-proof LED lights that are safe for use in a variety of hazardous locations. Click each photo to see details, including a complete list of classifications and certifications.

If you have any questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.