Millions of dollars can be saved every year in every major or little city in this country and those around the world. This sounds like a newspaper headline but it is the actual hard truth. The amount of energy necessary for street lighting is massive. For example, Britain needs about 1900 gigawatt hours for street lighting alone, which yields 3 million tons of carbon dioxide emissions which could all be avoided and greatly reduced. Imagine cutting that down to 20%. Can it be done? Of course it can, LED street lights have been proved to have that effect.

With the economic crises, cities have started to switch off lights to save up on the electricity bill. This is one of the many solution proposed. Unfortunately, LED street lights were not proposed and that is a major mistake.  There are installation costs you might say. Well, sometimes there are, but these are equal to zero based on savings achieved over time. It means not seeing the whole picture because the lighting systems now used on the streets needs extensive costly maintenance while LED street lights will need almost none.

This is not a small fact. Maintenance means dozens of monthly salaries and costs with equipment and cars. This is only for one city but imagine the positive effect of this at a country scale or even a global scale. It will actually make a difference. In addition, these LED lamps are retrofit so there are not additional costs on that. Simply when one light burns out it should be replaced with an LED which reduces your costs by not having to fully replace your lights entirely.

There have been cases when the LED obvious benefits are:

The list can surely go on. Most people get stuck on the price but at such a big number of Street Light LEDs needed any dealer will be more than happy to negotiate a solution for the whole city so the costs will be lower than normal. In addition, the provider will stick around with advice and consultation.

In the end, it is just a matter of putting ideas into practice. Only this way we will manage to create a better world.

You use it every day, but do you really understand electricity? It’s important, because, without understanding electricity, it’s hard to maintain electrical safety in your home. In order to understand electricity, you basically need to grasp five key concepts; we like to call them the five hidden mysteries of electricity.

One of the most affordable and effective components of any home security system is motion detecting outdoor lighting. Installed by a professional electrician, these lights can give you years of reliable service and peace of mind.

But like any part of your household electrical system, problems can arise from time to time. If your outdoor security lights are staying on all the time, not coming on at all or otherwise performing poorly, you can try these simple DIY fixes before calling an electrician.

Most motion detecting light fixtures allow the motion detector to be aimed at a specific area. If your lights are coming on too often, it could be that the sensor is aimed at a nearby street or an area where wildlife roam around at night. If the lights aren't coming on at all, the sensor might be aimed directly at the ground or into the side of the house. Experiment with different sensor positions after dark and walk around in the areas you want to secure to fine-tune your aim.

Motion detectors also typically come equipped with sensitivity settings. Too sensitive, and something as small as a fly could set it off. Not sensitive enough, and a prowler could come within a few feet of the fixture before it lights up. Locate this setting and fine-tune it to your liking.

Another common setting for motion detector lights is a light duration time. This can be as long as 30 minutes, and if your lights are unwittingly set this way, it could give the impression that they stay on all night. A good duration for most security light applications is one to two minutes.

A dirty sensor can’t detect movement properly. If dirt and dust have accumulated on your motion detector, use a wet rag to wipe it clean, then re-test your lights.

Security lights can get off-kilter if there are interruptions in the electrical supply, such as power outages, power surges and accidentally flipping light switches or breakers. Sometimes this can result in lights that stay on or off all the time. To reset most motion detecting lights, shut off the power supply at the switch for at least 30 seconds, making sure there’s no motion in front of the sensor during this time. Then turn the light back on and test it to ensure proper function. If there was motion in front of the sensor while the power was off, this may need to be repeated.

Not all motion detector problems can be fixed this easily. If you have persistent problems, storm damage or faulty installation, it’s important to call in your local licensed electricians for a professional evaluation and repair.

Smart technology is poised to take over the home appliance market. We already have smart thermostats, smart lighting and even smart refrigerators. If that's not enough for you, there are some new contenders on the market that allow you to turn any electrical device in the home into a smart item. The best part is that it's a simple DIY experience – no need to find an electrician to hook it up. It’s the smart plug, a small box that you plug into your home's outlets. From there, you can use your smart phone to control whatever light, television or other electronic appliance routed through the smart plug. Read on to learn more about these remarkable efficiency devices.

Control and Monitor Your Electronics

There are a variety of smart plug options on the market: The Satechi IQ Plug, the Belkin WeMo Insight Switch, the D-Link Wi-Fi Smart Plug and the Valta Starter Kit, among others. The cost and functionality of the different brands vary, but they all operate on a similar principle – allowing you to set schedules and remotely control whatever device you choose.

The smart plugs connect to your phone via Bluetooth or wireless Internet, so you can switch them on or off from anywhere in the home – or even from the other side of the country if you have an internet-optimized model. You can also program schedules so the plug automatically activates an appliance at appointed times – turning a coffee maker on first thing in the morning, for example, or switching on a space heater before you go to bed in a chilly part of the house.

Retro Meets Modern

The upshot is that there's no need to wait for cutting-edge smart devices to come out to keep your home on the cutting edge of technology. Imagine impressing your neighbor by demonstrating the new smart functionality of a retro 1950s television, or your old Victrola vinyl player.

Smart plugs also monitor how much electricity a given device uses and when, so you can make informed choices about increasing your energy efficiency though disaggregation, breaking it down appliance by appliance. You can also save energy by using the smart plug to turn off the power to devices when you aren't actively using them, preventing your electricity bills from skyrocketing due to always-on settings or “energy vampires.”

Savings and Control All at Once

If you have additional questions about smart plugs and how they work, find an electrician who can show you their utility and functionality. With surprisingly little effort, you can harness their power to save energy and control devices all throughout your home.