We’ve recently added a new explosion-proof light for use in granaries, paint booths, mills, mines, oil refineries, auto shops, marine vessels, shipyards, and other hazardous locations.

This LED light is listed as UL1598 for wet locations and UL1598A for outdoor marine applications. It is classified as UL844 and meets National Electric Code—NFPA 70, article 500—requirements in the U.S. for Class 1 Division 1 (groups C and D), Class 1 Division 2 (groups A, B, C, and D), and Class 2 Division 2 (groups F and G) hazardous locations. The light fixture meets IECEx Zone 1, 2, 21, and 22 requirements for safe operation around combustible gas and dust.

Designed to replace 320-watt metal-halide (MH) fixtures with comparable output—the 100-watt LED explosion-proof light emits 13,000 lumens of natural white illumination. This weatherproof LED fixture operates within a 100-277V AC range and is built to last five times longer than MH lights.

The durably constructed light has a vibration-resistant anodized aluminum housing that prevents the release of sparks from internal components. The die cast housing is also powder coated for corrosion resistance and has a removable back plate for access to the constant-current driver, which is sealed with a silicone gasket. LEDs are protected by a tempered glass lens.

A conduit is required for installation, and the fixture has two openings for input and output connections. The LED explosion-proof light can be pole mounted or mounted to a wall, floor, or ceiling with its included bracket. A five-year warranty protects against any manufacturer defects or malfunctions.

The home electrical system consists of various components that enable the safe delivery of energy to different sections and appliances in the household. Even though the system may appear complex, it is important for the homeowner to understand a few basics.

This would help you when things do not work or there is an emergency that requires turning off circuits or the entire installation. In addition, an understanding of the home electrical system will help the owner respond to questions from prospective buyers.

All the electrical circuits in the house originate from the main breaker panel. The panel is usually inside the house and near to the power entry point. However, the panel can also be far, and especially when in a multi-family structure.

The rating of the panel determines the number of circuits and power that the home electrical system can support. Some older homes have been using the 100 Amp service, smaller installations use a 60 Amp service while newer and larger houses are built with 200 amps to accommodate the increased number of electrical and electronic equipment commonly used in a modern household.

Different loads require the correct size of cables and breakers that can handle the current without heating up. For example, an air conditioner requires a 30 amp circuit while a kitchen may use two 20 amp circuits.

If there is a fault, such as a short circuit or overload, the breaker trips and cuts off the power to the affected circuit, hence preventing further damage that could lead to fire. Before resetting the breaker, you should first ask an electrician to check and rectify the problem.

A home electrical system consists of different individual circuits originating from the main breaker panel. The wires from the panel run to the rooms to supply the outlets, lights, and hand wired appliances. In most cases, several rooms may share the same circuits such that all the lights in the house are on one breaker, outlets on another breaker, etc.

Some dedicated circuits from the main breaker may go directly to the hard-wired appliances and nowhere else. Equipment such as the electric water heaters, furnaces, and air conditioners are usually installed on their own. Other hard-wired devices include the smoke alarms, which may also have battery backups so they will work even when there is a power outage or a fire interrupts the home electrical system.

Grounding is an essential protective feature that must be installed in all home electrical systems. It provides a path for the electrical current arising from faults that make the exposed metallic parts to become live and dangerous.

The ground connects all the exposed metallic parts to the earth mass through a third wire in the power cord to the equipment. This provides a low electrical resistance path for the current, hence, making the parts safe to the touch even in the event of a malfunction.

maintenance and repairs.

Scams are nothing new in the Tampa area. For years and years, unscrupulous folks have been trying to cheat homeowners out of their money. And in the dead of summer, scamming is at its worst! All kinds of unsavory folks come out of the woodwork, offering false claims about electrical, lighting, and other contract work that they have no intention of actually doing.

The refrigerator may arguably be the most critical appliance in your home. We rely on them all day, every day to preserve foods and keep them fresh. And they aren’t exactly the quietest appliances out there, either, usually emitting a tonal drone when in operation. But occasionally that standard hum may become a rattle, or worse. Having trouble with a noisy fridge? If so, our electricians in Upper Marlboro might be able to help.

First thing first: is your refrigerator on a dedicated circuit? If not, noises are the least of your problems. Need help installing and wiring a new appliance for your home? Contact the team at Kolb Electric! We can bring you the service and quality care you deserve, and our electricians in Upper Marlboro are unmatched in skill and knowledge!

There are scant few things that can actually contribute to an unusually noisy refrigerator, which is technically a good thing, since troubleshooting the problem doesn’t tend to take too long. You could be dealing with:

Fun (Not Actually Fun) With Refrigerator Fans

The majority of undue fridge noise comes as a result of a dirty or damaged fan. There are a few fans that could be at fault here, somewhat depending on the type of refrigerator you have. If your issue is indeed a fan, it could be the:

Strange Sounds at the Base of Your Refrigerator

A consistent rattling noise coming from somewhere near the bottom outside of your refrigerator is almost certainly a loose drain pan. This is a really obnoxious noise, but actually a very simple fix, since it usually only needs a quick tightening using the appropriate tool (screwdriver, hex key).

A Troublesome Refrigerator Compressor

Your compressor can be found on the back of your refrigerator. It is almost always a big black metal fixture; looks sort of like a funky space helmet. But if the sound is your compressor, you’re in for some fairly bad news, since it’ll need to be replaced. In some situations, it’s a better idea to just replace the refrigerator in total.

Looking for an electrician in Upper Marlboro that can bring you superior service to meet your electrical appliance installation needs? If so, you can count on our electricians in Upper Marlboro! Our team has been proudly serving up the best in service for decades, and we’re just a quick click away!

Many modern American homes were constructed significantly before many modern Americans were born. We have homes that have been around since the Victorian Era and before, with all that that implies. Many houses are rife with out of date, unsafe electrical wiring, insufficient or toxic insulation, or other structural problems best corrected for the health and safety of anyone currently living there. Flicking on and off the light switches is nowhere near sufficient as a way to test the efficacy of any home’s electrical wiring. The intricacies of electricity extend further than simple functionality.

Before the 1940s, electricity was often done in a knob and tube wiring style that is currently vastly out of date. People should not assume that previous tenants or homeowners updated their electricity systems without inspections, since repairing knob and tube wiring was very expensive years ago. Knob and tube wiring is unsafe and prone to problems, but it is also highly inconvenient. Home inspections and getting your home wiring checked can save families significant time, money, and heartache in the long run. People that live in houses constructed around or before the 1940s, and especially between 1880 and 1940, are strongly encouraged to get their homes inspected. Licensed electricians can tell you if the wiring in your home poses an increased risk of fire or electrocution on a large scale, or inefficiency and proneness to blackouts on a small scale.

Knob and tubing wiring was never fitted with a grounding conductor for safety back in the pre-War period. Knob and tubing wiring used to have advantages in terms of cost, but today, the price of labor tends to outstrip the cost of material. Many knob and tubing wiring systems do not have enough branch circuits to suit the needs of a typical modern household, and will strain to supply the necessary electrical load. The amount and intensity of electrical equipment required by an Information Age resident substantially outstrips anything the people of the 1940s could have expected. Knob and tubing wiring left over from decades previously may well have been damaged further by renovations over the years, wear and tear, and various household pests, which only increases the risk of problems.

There are very few situations where a knob and tubing wiring system is legally installed today, according to building codes. Insurance companies are increasingly denying coverage to homes that have not upgraded their wiring from knob and tube wiring to a more modern power cables system. Updating your home’s wiring can add a substantial amount of money to your resale value, so families will increase the value and safety of their homes by updating them to meet modern electricity specifications.