/foot)

Strips with more LEDs per foot will consume more power.

In short, if maximum energy efficiency is what’s most important to you, choose a light strip with smaller LEDs and fewer LEDs.

In order to ensure your LED power supply doesn’t overheat and fail prematurely, we use this general rule of thumb:

Make sure the total wattage of your LED strip lighting is at least 20 percent less than the power supply’s rated wattage.

For example, if you have an LED strip light that requires 80 watts of power to run, you’ll need a power supply that’s rated for at least 96 watts.

The vast majority of our strips include wattage per foot right on their product pages.

power supplies range from six watts to 1,500 watts for compatibility with a wide variety of LED strip lights.

Let’s take a look at an example:

It’s important to verify that the voltage of the power supply you choose is compatible with the voltage of your LED strip lighting. Also, be sure that the power supply’s input voltage matches that of the location it will be installed in. If you have an LED strip with 12-volt DC operation that you wish to use in a 120-volt AC home wiring system, you’ll need a power supply that includes 120 volts in its input range and has 12-volt DC output.

Another factor to take into account for longer runs is voltage drop. A significant voltage drop is present after a certain distance of LED strip. After this distance, there will not be enough voltage present to light the next length of strip. This varies depending on the type of strip and length being used. Usually, a single-density strip (nine or less LEDs per foot) will need to run back to a power source every 32 13/16 feet (10 meters). A high-density strip (18 or more LEDs per foot) will need to run back to a power source every 16 3/8 feet (5 meters). Please refer to “Max Run” in the specifications table of the strip light to determine how many can be run continuously without a parallel run back to power.

3) the 4) if you want your strip to be dimmable

power supply calculator on the product pages of all of our LED strip lights!

There are a few steps involved:

Step 1: Select your strip and the length you need.

Step 3: Click the green “Power Supply Calculator” tab, and select your product by choosing it from the list OR by pasting the exact part number in the search bar.

Step 4: Enter the number of strips at the desired length you’ve selected and voila! You’ll see a list of all compatible power supplies with the best match at the top of the list!

When dealing with electronics, safety is paramount, and you want everything to work like it’s supposed to. So if you’re still not sure which power supply to use for your LED strip lighting project, just reach out to our technical support team or customer service department at 866-590-3533. Our teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Do me a favor and imagine that you are in need of suggestions for a Fourth of July party. You head to via Wikipedia

Of course, I’m not talking about snap pops, black cats, m-80s, or even those cool little paper cars that gush sparks, travel four feet, and then burn to death in a microblaze reminiscent of a 1970s action film.

I am talking about the ones that explode up there, the ones you have to tilt your head back to see. That the fireworks explode in the night sky is important because the very act of looking up immediately takes you out of the mundanity that the rest of the holiday will surely deliver – the planning, the decorating, the complications. No more overflowing trashcan with wing sauce-smeared cocktail napkins. No more ordinary stuff.

At the heart of the Fourth of July is a spirit of independence that is, actually, a big deal. When your eyes are on what’s going on at ground level, it can be hard to realize how big a deal ideas like independence and sacrifice are. Once your attention is arrested by the spectacle of fireworks happening up there in the sky, you’re taken out of the everyday and able to reflect on these things, which is important, I think.

2. They are glorious.

“And the rockets’ red glare/ The bombs bursting in air,” goes the song. Did you know that the word “rocket,” in the sense of the combustion-fueled projectile, dates all the way back to 1566? The Oxford English Dictionary notes that rockets have historically been “used for signalling, in maritime rescue, for entertainment, and as a weapon.” Fireworks symbolize communication, violence, and entertainment: A strangely fitting mix for the complex human heart.

The red glare of the rockets in “The Star-Spangled Banner” refers to the bombardment of Fort McHenry in the War of 1812. That the fort was not taken during the battle is indeed glorious, and fireworks are a reminder of the fortitude of the people who fought and suffered to keep America independent in 1776 and again in 1812. Boom. (Literally: boom!)

3. They are beautiful.

So, those are my three reasons that fireworks are the most important part of any holiday festivity: They happen above you; they are glorious; and they are beautiful. I think these are pretty good reasons for making sure you see some fireworks this Fourth of July.

Take a moment out of the hectic festivities to reflect on the spirit of rebellion, creativity, and inspiration that is involved in claiming and defending independence from parties eager to exploit the vulnerable. This is about more than just us. This unites us across time and space. Fireworks reflect the beauty of standing together for what is right, even when it hurts.

When a fire breaks-out, most people just assume that it’s been caused by some inflammable substance. While that might be the case, it’s important to keep in mind that fires can also be caused by electricity. The one thing to keep in mind is that an electrical fire can’t be doused by water. Faulty or old electrical installations can lead to a fire and cause untold damage to life and property.

There are times when the electrical equipment or appliances in an electrical system can be the cause of overheating & overload, which can end up causing a fire. So, exactly what is it that causes an electrical fire? There are three main reasons, let’s take a detailed look at what these are and what can be done to prevent this from occurring:

Some properties have wiring that is decades old and electrical wires do tend to deteriorate with age. In fact, if the wiring in your house is over 15 years old, the recommendation is that you should get the entire property rewired. Older wiring wasn’t designed to bear the electricity load that current-day appliances demand. At times the electrical contractor might have cut corners and installed wiring of poor quality and this can lead to a similar problem, both of which can result in fires.

Arcing is quite a common problem with electrical wiring. As mentioned earlier, most homes have a range of heavy-duty electrical appliances. When you run a number of these appliances simultaneously in your home, it results in overloading and overheating of the wires. If the wiring is old, it will get heated up which will cause the insulation around it to melt – this results in arcing and an electrical fire may erupt too.

There are times when electrical wires are just too close to an external heat source which causes the outer insulating sheath of the wiring to melt. If this goes unnoticed, it can result in an arcing and fire.

Regardless of what has caused the electrical fire, if you attempt to contain it by pouring water on it that will escalate the issue. Water doesn’t have any effect on electrical fires; in fact, if you try to use water to douse an electrical fire, you can get electrocuted. What you need to deal with an electrical fire is a Class C fire extinguisher.

This type of extinguisher has dry chemicals that help contain the fire. Depending on how severe the fire is, it might be possible to completely bring it under control using a Class C fire extinguisher. If you don’t have this extinguisher, baking soda might help to some extent.

In case there is a break-out of fire on your property, the first thing you should do is switch off the power-mains; this is effective in containing the fire. Ideally every home and commercial establishment should have a Class C fire extinguisher or two, based on the size of the property and that should be used in case of any fire in the electrical wiring. An electrical fire is an electrical emergency and it’s crucial that you keep the number of a local, reliable electrician handy.

Never try to fix any electrical issues on your own. That can only lead to more complications and will compromise the safety of your property. We at Allround Electrical can rectify all types of electrical faults and we provide a range of electrical services. For more information, contact our friendly team today at this number – 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

Question:

I’m an electrical contractor in Toronto, Ontario, Canada. In one of the earlier posts I’ve noticed that you offer a lifetime workmanship warranty. Could you explain to me how it works? As I am planning to implement something similar here. If you can share a copy of you warranty agreement – that would be ideal, but if you cannot I understand that. Any information would be greatly appreciated.

Best, Fred Samson

Answer:

For over 30 years I have offered a Lifetime Guarantee on all my company’s work. Over the years, this has generated a lot of extra sales for our Los Angeles electrical contractor customers. The way our guarantee has been so successful for us is that we have a Lifetime Guarantee on all my company’s [B]work[/B], not the materials used.

We tell customers that we guarantee our own work for LIFE, but we can’t be responsible for materials that we didn’t build ourselves (light fixtures, smoke detectors, dimmers, circuit breakers, etc.). On materials, we back-up whatever the manufacturer’s warrantee is.

I’ll be happy to talk about this with you in more detail if you want. Feel free to call me during business hours M-F.

Good luck with your business.

Visit our company profile.