The good news is that heating systems in modern homes are safer than they’ve ever been before. But while many people never experience any major risk to their safety due to a furnace or boiler, it’s still a possibility. Any heating system that uses combustion to work, like a natural gas furnace, could potentially leak a dangerous gas called carbon monoxide (CO, for short) into the home.

The heat exchanger is where combustion produces a flame as natural gas ignites. This heat is contained within a heat exchanger made of aluminum or steel. It is essentially a curved tube, and the smoke and carbon monoxide byproducts vent through the other end and out of the house. Air blows over the heat exchanger to heat up and is sent to the ducts running throughout the home.

Unfortunately, over time, the heat exchanger can become damaged. This is especially true if you have anyone but a professional technician work on your furnace, but it can also happen with time. You should have HVAC technicians inspect your heating system each and every year to check for leaks and cracks.

Carbon monoxide is an odorless, colorless gas. That means you wouldn’t have many ways to notice if it were in your home. It is poisonous, and sometimes people don’t know about it until people in the house start to get sick.

Carbon monoxide detectors save lives. A CO detector near each room where people sleep (and throughout your living spaces) should be tested each month and replaced every 5-10 years. You should also replace the batteries for your CO and smoke alarms every 6 months (even if the test works).

The storage of renewable energy for business and homes, and it’s applicability as a renewable energy solution is often seen as a daunting prospect, but solutions are now available that truly bring this “next generation” technology to a level that can be easily implemented and understood.

Renewable power needs to be broken down into individual applications and needs. Not everyone cares about promoting technology and advancements, but by taking steps one at a time, we accomplish two things. One is education on possibilities, and two is further development on technology. Here is my idea on awakening society at a level most people can comprehend until other options become refined and perfected.

Storage of renewable energy with Wind and Solar for daily use:

Photovoltaic and Wind technology together make this really cool. When you add power storage with renewable energies, these automatic transferred units can be programmed to “sell back” electricity when electrical demand and storage capacities are satisfied. All of this is programmable in any order/sequence desired. By putting the units side by side, these systems can produce 240 volt single phase or three phase power with a pure sign wave.

Here is a great example of a real world solution that we call the Power Cart. This example utilizes solar panels, yet wind power could be added to the system very easily. This Power Cart system provides 20,000 watts of usable power, rechargeable through 4 solar panels, offering any home or business the ability to create, store, and use their own renewable electricity on a daily basis, and maintain power in the event of an outage.

Power Cart

Power Cart will have a Continuous Output of 3.6KW with a 9KW Surge start. This 48 volt grid interactive Outback power plant has 60 amp input/ output, and a UPS 60 amp transfer switch. It works from batteries, generator, or grid and can be charged by sun, wind or any type of generator or from the utility grid. Recharge can be programmed to take advantage of these in any order or percentage you desire. It is internet programmable and monitorable taking over 400 screens in excess of 10,000 commands – including the most important one ‘Let me work on automatic and don’t bother me.’ Also included is complete DC protection from the array to the charger, and from the batteries to power plant& AC protection via 60 amp breaker outlets (wired per country – as per order) also available in any output voltage ex. 100-150 volt, in 50 or 60 cycle.

Power Cart is a 4 wheel trailer – Ready to Work. No assembly required

These can be daisy chained for more production, more voltage, more storage.

Wi-Fi capable.

With summer coming to an end, it is an excellent time to take advantage of the cooler weather to get some things down around the house. It is time to prepare for winter and the weather that accompanies the season. While you are taking care of putting away the outdoor furniture and blowing out the sprinklers, it is a good time to call an electrician in Beverly Hills to have an electric safety inspection completed. The team at The Electric Connection is here to help you discover any electric safety problems you may not be aware of. We tend to use more electricity during the winter plugging in Holiday lights, space heaters and spending more time indoors in general. It is important you make sure your home’s electric system is in good, working condition.

During the inspection, the electrician will evaluate your outlets, light switches and the electric panel to see if there are any issues. If you have been experiencing problems with flickering lights, an outlet that doesn’t work all the time or a tripping breaker, you need to let your electrician know. These are subtle warning signs of a bigger problem. You will want to get any Beverly Hills electrical repair work completed sooner rather than later.

You will rest easy knowing your home’s electrical system is up to code and doesn’t pose a serious risk to your family. During the inspection, the electrician will give you recommendations of things you can do yourself or have done by a professional to add another layer of safety to your home. These are optional and you will have the ability to decide if you want to go ahead and have it all taken care of or wait until it is a better time. Don’t delay, call The Electric Connection and schedule your electric inspection today.