When a fire breaks-out, most people just assume that it’s been caused by some inflammable substance. While that might be the case, it’s important to keep in mind that fires can also be caused by electricity. The one thing to keep in mind is that an electrical fire can’t be doused by water. Faulty or old electrical installations can lead to a fire and cause untold damage to life and property.

There are times when the electrical equipment or appliances in an electrical system can be the cause of overheating & overload, which can end up causing a fire. So, exactly what is it that causes an electrical fire? There are three main reasons, let’s take a detailed look at what these are and what can be done to prevent this from occurring:

Some properties have wiring that is decades old and electrical wires do tend to deteriorate with age. In fact, if the wiring in your house is over 15 years old, the recommendation is that you should get the entire property rewired. Older wiring wasn’t designed to bear the electricity load that current-day appliances demand. At times the electrical contractor might have cut corners and installed wiring of poor quality and this can lead to a similar problem, both of which can result in fires.

Arcing is quite a common problem with electrical wiring. As mentioned earlier, most homes have a range of heavy-duty electrical appliances. When you run a number of these appliances simultaneously in your home, it results in overloading and overheating of the wires. If the wiring is old, it will get heated up which will cause the insulation around it to melt – this results in arcing and an electrical fire may erupt too.

There are times when electrical wires are just too close to an external heat source which causes the outer insulating sheath of the wiring to melt. If this goes unnoticed, it can result in an arcing and fire.

Regardless of what has caused the electrical fire, if you attempt to contain it by pouring water on it that will escalate the issue. Water doesn’t have any effect on electrical fires; in fact, if you try to use water to douse an electrical fire, you can get electrocuted. What you need to deal with an electrical fire is a Class C fire extinguisher.

This type of extinguisher has dry chemicals that help contain the fire. Depending on how severe the fire is, it might be possible to completely bring it under control using a Class C fire extinguisher. If you don’t have this extinguisher, baking soda might help to some extent.

In case there is a break-out of fire on your property, the first thing you should do is switch off the power-mains; this is effective in containing the fire. Ideally every home and commercial establishment should have a Class C fire extinguisher or two, based on the size of the property and that should be used in case of any fire in the electrical wiring. An electrical fire is an electrical emergency and it’s crucial that you keep the number of a local, reliable electrician handy.

Never try to fix any electrical issues on your own. That can only lead to more complications and will compromise the safety of your property. We at Allround Electrical can rectify all types of electrical faults and we provide a range of electrical services. For more information, contact our friendly team today at this number – 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

One of the reasons that boilers continue to stay popular as a method for home heating is that they can last for many years without needing major repair work, and their lifespans are longer than most other home heating systems. A well-cared for boiler can keep a whole generation of people in a home cozy.

FB Electrical Services offers boiler maintenance in Somerville, MA. Whatever services you need to keep your boiler working for you, you can trust to our talented team to provide it for you. We offer 24-hour emergency service for your convenience and peace of mind.

Super Bright LEDs employs skilled engineers and experts to test LED lights before they’re sold. Our in-house test lab is stocked with numerous pieces of equipment that provide important specifications about each product, such as brightness, color temperature, and operating temperature. Testing methods include the use of integrating spheres, spectrometers, Forward-Looking Infrared (FLIR) cameras, and an environmental chamber. In addition to this equipment, our technicians perform burn-in tests and durability tests that can last anywhere from two weeks to several months.

CCT, and

Our state-of-the-art environmental testing chamber utilizes a 30-cubic-foot enclosure to reproduce the full ranges of temperature and relative humidity found within commercial and industrial LED lighting applications. Data collection (photometric & electrical) occurs while a device-under-test cycles through specified environmental extremes. Chamber temperature ranges from negative 35° C (negative 31° F)  to 200° C (392° F), and humidity ranges from 10 to 95 percent.

To ensure that our products will perform under normal and extreme conditions—and to have a little fun—our technicians put them through a round of applicable tests. A selection of LED lights is time tested in the environment that each product is designed for. For example, waterproof boat lights are submerged in water, and weather-resistant landscape lights are installed outside. Depending on the type of product and its impact/weather rating, our technicians might drop, run over, freeze, burn, or even saw it in half to test the product’s durability.

We’re barely a week into fall and the temperatures are already dropping and the stormy season is upon us. Here in Virginia, we’re bound to get our fair share of severe thunderstorms, which always carry the potential of a power outage. Because September is National Preparedness Month, we thought we would help you prepare ahead of time for a power outage, should one happen in your neighborhood.