You're probably familiar with some of the federal energy efficiency programs by now. The most prominent, the Clean Power Plan, was announced last year with ambitious targets to limit carbon and other pollutants generated by the nation's electrical work. What you might not be aware of is the amount of impetus placed on the individual states to enact programs that advance the federal goals. Through the Clean Energy Incentive Program, or CEIP, states are responsible for reducing their carbon emissions by 2022 through renewable energy generation or increased efficiency measures. Read on to learn more.

States Picking up the Slack on Conservation

The Clean Power Plan sets a goal to reduce carbon emissions by 32 percent below 2005 levels by 2030. Although it is a federal rule enacted by the Environmental Protection Agency under the Clean Air Act, the national government doesn't actually have control over the nation's electrical work, so the plan requires the cooperation of the states to come to fruition. In turn, the states will have to work with big polluters within their borders, primarily power plants, to bring emission levels down.

The federal agency is using emission rate credits as the carrot to incentivize the conservation measures, rewarding states for their reduction in fossil fuel consumption, which the states then pass on to the individual power generators and other industry players. Other options include household and industry efficiency programs to encourage people to purchase modern appliances and otherwise reduce the consumption in their electrical work. In total, the EPA is pushing states to reduce carbon emissions by 300 million short tons.

State Help for Increasing the Efficiency of Your Electrical Work

One interesting aspect of the EPA program is that it contains extra incentives for states that focus on initiating programs in low-income communities. The exact parameters haven't been worked out yet, and various programs will still work differently in different states, but essentially the federal agency will provide twice the credits for projects that affect low-income households. That means states will have an easier time reaching their goals, and the most vulnerable residents of an area have a better chance of participating and realizing savings from the Clean Power Plan.

Regardless of what your income level is, you should keep an eye on any efficiency programs coming from your state in the coming months and years. While much of the work is aimed at power plants, other assistance may be available to homeowners to purchase new appliances, invest in residential renewable energy like solar panels or otherwise decrease both energy consumption and utility bills in the household.

Trust the Experts for All Your Home Service Needs

If you need help figuring out how to reduce your household spending on electricity, or have any other issues with your home electrical system, contact a professional electrician today.

If the motor seems to be fine, attempt to reconnect it to a load. For motors spinning in the wrong direction that are three-phase, swap any two leads either in the starter or in the motor connection box to reverse its rotational direction. Motors that struggle with a load may have something plugged up or jammed in the load itself. A mechanic may be required to check fans, belts, or pumps that are powered by a motor. When a motor trips the overload device, attach an anmeter to measure the current during startup and operation. Check the FLA on the motor nameplate to see what the expected current draw should be. If it is high, the motor may simply be overloaded. If not, the overload protection device may be set too low or may need replacing.

By following these basic ac motor troubleshooting tips, any electrician can quickly determine the cause of most problems in an AC motor.

Over the years, our clients have asked many questions about their electrical systems; how to best care for them, what the cause of certain issues are, and more. We’ve compiled just a few of the most common questions we get below, with our responses.

A: Is the switch all the way in the “off” position? You have to feel it click off before you can reset it. If you are able to return it to the “on” position—you’ll feel another click—and it does not trip again, then you were successful. If it continues to trip, then there could be a chance that you have a short circuit or an overloaded circuit. Quite often, an electrical panel upgrade is the solution.

A: There are a number of possible reasons this can be occurring. First, check for a tripped circuit breaker. Then, if it’s a GFCI outlet, check for a reset button right on the outlet itself. Push that, if there is one. In the absence of either of these issues, then it may just be an old outlet that needs replacing. Just like any other electrical component, it can wear out over time and is usually no reason for huge concern.

Do, though, make sure you don’t smell or see any smoke or smoldering—this can be indicative of frayed wires starting an electrical fire. If you do detect smoke, your next step is to call the fire department.

Flickering can happen with certain types of lightbulbs and are sometimes not a cause for concern at all. However, if either of flickering or dimmer are occurring when you turn something on or an appliance cycles on in your home, then you probably have an overloaded electrical panel. Another possibility is that the lightbulbs you have installed in whatever fixture is creating the issues are not adequate bulbs for that fixture.

Electrical rewiring in Fairfax, VA may be the best decision you make this spring. After all, with the weather finally making the switch from snow and sleet to sun and heat, now is the time to start making some positive changes around your home. There’s no better way to start changing with the times than by improving your home’s electricity and with improved rewiring, you can live more comfortably in your home than ever before!