If your family is like most around Des Moines, somewhere on the refrigerator is a list of emergency phone contacts for any number of scenarios ranging from calling poison control because Carson got into one of the bottles under the sink to calling the orthodontist because Julie had a mishap with her braces. However, when you have an electrical problem at your home, do you have someone you know you can trust to call? Instead of browsing the internet in hopes of finding an electrician with some free time, wouldn’t it be better to have an electrician that you can trust 24 hours a day? At Electrical Gurus, we want to be the electricians on your emergency contact sheet that you hopefully never have to call.

Power outages and electrical issues can happen at any hour of the day, and that’s why we provide service 24 hours a day, 7 days a week. Electrical emergencies that result in fire or injury should be reported to your local emergency service department immediately, but our electricians can handle everything from live wires to panel replacements. Whether your electrical issue was caused by an act of God or an honest mistake, we are here to keep you and your family safe from electrical problems.

Do not let the stress of an electrical emergency send you looking for help in the wrong places. If your home has issue that needs to be fixed right away, Electrical Gurus are the emergency electrician you can trust. We are a licensed, bonded, and insured 24 hour electrician, and we would be happy to help.

If you’ve been contemplating upgrading your home electrical system with your very own solar panel installation, there is no better time than summer. Here are a few reasons to make those dreams a reality.

The first is that you’ll get the best performance out of your system when the sun is shining the most. Of course, your solar array is going to give you energy savings all year long, especially in sunny southern California but in the summer, you’ll see impressive results right away that will really show you the potential of home solar power.

Without the threat of inclement weather preparing your home and installing your new system is much faster, translating to a more painless process for you. It also means that we have more jobs in the summer, so you might need a little advance scheduling. But all that is beside the biggest reason that you should pursue a solar panel installation:

The sooner you get solar at your home, the sooner you can start saving.

As you know, power prices increase all the time, with an average increase of around five percent a year. While municipal power increases, solar power provides a point of stability for your energy bill. Your solar power will always cost the same amount, so every time municipal power increases, your savings do too.

And with generous tax rebates and solar leasing agreements, you can establish an impressively low cost investment on your solar panel installation. You might even qualify for no down payment. You pay the cost of installation and parts over the life of your solar panel, even as you see instant deductions in your power bill.

As you can see, taking action now translates to intense savings for years to come. Don’t wait another minute. Let us help you take charge of you energy and financial future this summer.

As we near the end of summer, we’re still contending with temperatures in the 90 degree region. As a result, we are using our air conditioners for the majority of the day, every day. This puts a lot of strain on your electricity, which is probably reflected on your summertime utility bills. The good news is, there are a number of ways in which you can save energy, and thus reduce your electric bills. We’ve cited a few examples below.

This is a task that should be done at least on a yearly basis—bi-annually if you have a heat pump. You’ll hear some companies tell you that you can or should only have AC maintenance done before the cooling season begins. The truth is however, that AC maintenance can be done at any time of the year (though it is true that HVAC technicians are busier and harder to schedule at peak temperatures).

Preventive maintenance allows our technicians to fully inspect and clean your AC system, and make recommendations for any repairs that might be needed. When your system is effectively cleaned and repaired, it performs more efficiently, and therefor doesn’t use up as much energy as it normally would.

The Department of Energy estimates that 75% of the electrical use by your electronics occurs when those electronics are actually not in use. While there may only be a small amount of electricity used by each component, it adds up. We recommend that you plug each of your electronics into a power strip, and then when they aren’t in use, turn the power strip off.

This is a maintenance task that you can do on your own, at least every 3 months while your system is in use. If you have significant contaminants in your home, such as pet dander or cigarette smoke, then you should up this to once a month. If your air filters are clean, then your air conditioner won’t have to work as hard or run as long to do its job, which means it won’t be using up as much energy as usual.

Most people have dealt with a power cut at some time or the other. There could be a very bad storm or lightning could strike and the power could get cut; but it also returns quite quickly. However, you might switch on the computer and notice it has stopped working.

This is caused when lightning hits a power line which results in a sudden surge on the electrical pressure that overloads the electronic circuitry. It’s true that lightning strikes cause power surges; even everyday appliances in our homes can cause power surges every time they are switched.

Over time, these seemingly small surges can cause a lot of damage to your property; and they slowly reduce the lifespan of your refrigerator, computer or air-conditioner or any other appliance that’s plugged into a power outlet or any that’s been hardwired into the electrical system in your home. The one way to protect your property from damage is to learn more about what power surges are.

Across Australia, the basic electrical voltage for residences is 230V + 10% up to – 6%. The load vibrations are taken into account in this particular range, as the appliances quickly cut in & out. In case the voltage increases above the working range of the appliance, it can result in arcing in the appliance.

These arcs generate heat, and these results in damage to the electrical components within the appliance. This type of damage is cumulative and the appliances are still able to function normally, till the point the damage becomes so excessive that your PC or TV just stops working for no apparent reason.

For all plug-and-play appliances like your TV and PC, you can connect them to a point-of-surge protector, and that becomes a very easy solution. This particular system is very much like a standard power board. You simply have to plug in the appliances that have to be protected, into the device. This device doesn’t suppress/arrest the surge; it redirects that surge straight into the ground. If you have to protect only a single appliance and a point-of-use protector doesn’t fit, then it’s possible to get a special outlet with the built-in protection installed.

Even as the point-of-use devices protect various appliances which are typically plugged into any power outlet, you would have to get another device to protect those items which are hardwired into the electrical system of your home, including the lights and air-conditioners. These devices can be easily complemented by an electrical panel surge protector.

If it’s installed inside the mains, it will level out the fluctuations and power spikes; or it might also stop them well before they reach the devices. When a mix of electrical panel surge protection and point of use protection are used, it helps provide your equipment and devices from very powerful voltage spikes.

If you have consistently experienced any power surge issues in the past or if you want to just protect your property against the probability of surges, you only have to call us and speak with our experts. They will provide you with all the information and guidance you need and will ensure that you get the kind of solutions that work perfectly for you.

For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of CBUS installations. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263