You may not think about it often, but the power coming into your home travels a long way before it gets to your refrigerator, air conditioner, or any of the other appliances in your home. On the way, electrical current encounters fluxuations and interference from things like other appliances, machinery, and low quality wiring. That “Dirty” power can cause inefficiency and disturbance in your appliances, making things like the motors in your refrigerator and air conditioner, the circuits in your television, and all of your other electrical gadgets work harder than they need to, and wear out faster than they should.

A Power Conditioner will take the electrical current coming into your home and “clean” it, using filters to isolate power outlets and remove interference. This provides the correct voltage level to sensitive electrical equipment, allowing it to work safely and efficiently at the correct voltage.

Because power conditioners help your appliances run more efficiently, they can also lower the overall cost of running these appliances, and extend their lifespan. For more information about home power conditioners or for help on any electrical project in your home, please reach out to www.electricmaninc.com

Many homeowners start to get nervous when cooler weather starts to set in. Thinking about the rising heat bills is stressful, especially if you have holiday shopping to do. But don’t panic just yet: there are plenty of simple actions that can result in major savings! If you follow these 6 tips below, you’re likely to see a positive change in your energy bill.

Now that you’re prepped for a cozy but low-cost winter, relax and enjoy the season! If you need help installing any new energy-efficient lighting in your home or business, Bryant Electric Service is here to assist you.

Cold winter months bring opportunities for cozy moments indoors  — but also some potential hidden dangers. More than 45,000 electrical fires occur in homes each year, according to thea licensed electrician update any damaged or two-prong outlets.

Sometimes it’s hard to tell if you have old and unsafe wiring because electrical work is mostly hidden behind the walls of your home. Remember, however, that wiring problems are a major fire threat. Pay attention to these signs of hidden electrical issues and then get safe by

Lamps and other light fixtures provide necessary illumination but can also pose a risk. Placing a bulb with a higher wattage than a fixture can handle poses a risk for igniting a fire. Heed the maximum wattage allowed for all fixtures and decrease the wattage or replace ones that seem to get excessively hot when lit.

Never decorate a lamp with paper or cloth that could ignite, and keep fixtures away from textiles, like bedding or curtains. Replace cords that are frayed or damaged.    

The media room is perhaps the most lived-in area of your home.  Whether you are watching TV or reading a book, the lighting should be comfortable, energy-efficient and beautifying.  Tune in to a picture-perfect setting with lighting tips from Capitol Lighting’s professional consultants.

1. Track and Recessed:  General or ambient lighting is a must in any room, but it is especially important in a multi-functional space such as a den or media room where there will be a wide range of activities that call for specific light settings.  Overhead lighting should be installed as part of the initial room design.   Oftentimes, a standard grid lighting pattern does not work well with your seating and furniture layout, so it is best to draw up your lighting design in the initial stages of planning.

NOTE:  In general, recessed cans should be installed 30 inches away from the wall and 4-5 feet apart.

Track heads, recessed and/or rail lights should be strategically located so as not to create glare or cast unflattering shadows upon individuals in the room.

Rail lighting from WAC Lighting highlights artwork;  hanging pendants provide soft ambient illumination and artistic accent light.  Rail and track lighting are highly versatile and allow for easy adjustments if you decide to change your decor.

2. Wall Lighting: Wall lights work well in a media room as they expand the space and provide an evenly distributed balanced illumination.

Image from HGTV.com “Must-see Media Rooms”

“Jaxon” wall lighting from Troy Lighting, available in a variety of color options

3.  Portables:  From sturdy reading lamps to decorative table lamps, portables are a useful addition to the multifunctional media room.  They provide individualized task light, as well as general illumination throughout the room.

Room design by Sandra D’Amata International

Ambience table lamp (shown above), Frederick Cooper “Script Reader” floor lamp and Minka-Aire’s “Great Room” fan from Capitol Lighting

4. Control Systems:  Dimming and automated control systems are a must for the media room.  Even if you have programmed your lighting controls into your Smart phone, wall switches with a variety of room settings and dimming capabilities are a good idea and are available in a choice of colors to complement your rooms’s decor.

Dimmer switch from Kichler Lighting

5. Special Considerations:  LED bulbs and LED light fixtures are suitable for media room lighting designs, just be careful to choose all your light sources with the correct color rendering, color temperature and shielding. Look for LED light sources that are dimmable and in warm (2700K)  color temperatures. *

LED torchiere floor lamp from Holtkotter

* Solid State Lighting and LED light sources are being refined so that predictable color rendering and color temperature will be more visually accurate.  A new metric to measure LED illumination is in the works:  The Color Quality Scale (CQS) will help to identify the visual characteristics of LED light sources more clearly, but right now–a bit of trial and error may help you find LED light sources that are complementary to your media room’s decor.

3 Keys to Remember:

*  Avoid having sharp areas of contrast between dark and light–illumination should be evenly dispersed with slight variations that allow your eyes to transition from reading a book, conversing with friends or watching  TV.

* Make sure lighting/fan controls are easily accessible–opt for a remote control system in addition to wall switches.

* Go for the most energy-efficient light sources, but do not sacrifice the overall look of your room.   If you are not using fluorescent or LED light sources, opt for eco-halogen or top quality incandescent bulbs in portable light sources.