Spring showers bring lots of beautiful flowers, but all that dampness can cause some problems in your home. Without proper ventilation, the dampness will seep into the frame of your home and it can be very costly to try and remediate mold and mildew problems. Your best defense is a good offense. Protect your home from destructive dampness with the help of a Los Angeles Electrician. You can count on the team at The Electric Connection to help you protect your home.

A bath fan isn’t always a standard feature in bathrooms. However, they are crucial to the health of your home. You need a bath fan to help keep your home dry and mold free. The fans are often seen as a non-essential fixture in a home, but they are just as important as lights or a lock on the front door. When you shower, the steam from the hot water will create condensation. The condensation is damaging to the countertops, the walls and the frames. If you have ever stepped out of the shower and noticed your towel was a little damp or the countertop was wet, you can imagine what damage daily, multiple showers are doing to your bathroom walls.

You can eliminate this situation by turning on a bath fan installed by an electrician. Los Angeles homeowners can choose a fan that suits their needs. The fans will help eliminate the steam in the room by pulling out the warm air and venting it outside. There are a variety of models on the market. You will need to choose a fan that is big enough for your bathroom. Some models include lights and heaters. These fans are beautiful and effective. If you are ready to protect your home from becoming damaged by dampness, give The Electric Connection a call today to schedule your bath fan installation.

Spring is approaching and many families are feeling the fatigue of winter’s hardships. What better time to travel than now? Many families are just trying to get away from the cold. Booking a trip can be exciting, but have you ever arrived at your destination and said “where am I supposed to plug in my hair dryer?” or “how am I going to charge my phone?”

Let’s be honest, the last thing on your mind when packing for any vacation is bringing that adapter along with you. Often times we are such in a hurry to pack we tend to forget that not every country has the same outlets as we do.

Here are some easy steps to help you get organized while traveling and how to take the charge with you wherever you go.

In the US and Canada the average voltage is 120 volt per residential home. However, when traveling abroad the voltage is quite different. For example, Europe’s standard house will use 240 volt, which is substantially more voltage than the average North American home.

Before purchasing a travel charger or a universal adaptor always read the label on the back of the packaging to ensure you are getting the right voltage amounts for the right countries. Doing so will ensure you won’t end up with a damaged device, appliance or blown fuse.

Whether its bringing the spark alive in a relationship, or just traveling with friends and family, remember to bring the charge with you!

As a Top Dallas Electrician, in today’s economy, I’m amazed at all of the companies that have been losing their Better Business Bureau ratings due to sloppy work and customer service. In the last few months, the BBB has dropped business’ ratings, or their BBB listing entirely, due to sloppy workmanship and unacceptable customer service practices.

Here at ElectricMan Inc., where we strive on a daily basis to maintain our A+ rating as a BBB Accredited Business, we don’t understand this way of thinking. Customer service is what sets us apart from our competitors, and even in an economy where customers and businesses may be struggling, it is never acceptable to lower the quality of service or your customers’ experience.

How do we achieve this level of customer service?

As the owner of ElectricMan Inc., I am so confident in our ability to satisfy our customers’ needs that I am including my personal mobile phone number here to ensure that our high level of customer service is never jeopardized.  If you ever have any concerns regarding the level of service, or the quality of the work that you receive from ElectricMan Inc. please do not hesitate to reach out to me personally. You can reach me, Nick Schaeffer, Master Electrician and Owner of ElectricMan Inc., at 972-898-8098. I will always be happy to do everything that I can to make your experience with my company an enjoyable one.

At ElectricMan Inc, We will always go the extra mile!

Restriction of Hazardous Substances (RoHS): RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Warranties

Super Bright LEDs, Inc. offers a minimum 2-year warranty to protect against manufacturer defects and malfunctions. Longer warranties are available depending on the product. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair, or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.

Read more

Lifetime Warranty

Super Bright LEDs, Inc. offers a Lifetime Warranty on a variety of products to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.

Read more

CE: Meets European health, safety, and environmental standards

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

UL Recognized: Product component safety and environmental certification from Underwriters Laboratories (UL) LLC

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.

DLC: Listed as a quality, energy-efficient product by the DesignLights® Consortium (DLC®)

The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC’s Qualified Products List. For more information, click

DOT Approved: Approved by the Department of Transportation (DOT)

The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.

SAE International Class 1: Classified for use as emergency vehicle lighting by the Society of Automotive Engineers (SAE)

Vehicle warning lights are ranked by the Society of Automotive Engineers (SAE) according to class. A Class 1 LED light delivers the most amount of light (in comparison to class 2 and class 3 lights) and is ideal for emergency lighting on ambulances and fire trucks as well as police and rescue vehicles.

ETL Listed: An ETL-Listed product meets national safety standards

A product that bears an ETL-Listed label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.

FCC: Complies with Federal Communications Commission (FCC) rules. Won’t cause harmful interference.

Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won’t cause interference with other electronic devices. According to FCC’s website, “The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories.” Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC’s guidelines and limits and do not cause harmful interference.

SAA: Standards Australia (SA) compliance

Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.

IP65

The weatherproof product allows zero entry of dust. It is protected against jets of water and may allow limited liquid entry.

IP66

The weatherproof product allows zero entry of dust. It is protected against strong jets of water and may allow limited liquid entry.

IP67

The waterproof product allows zero entry of dust. It is protected against the effects of immersion between 15 centimeters and 1 meter.

IP68

The waterproof product allows zero entry of dust. It is protected against long periods of immersion under pressure.

IP69K

The waterproof product allows zero entry of dust. It is protected against high-temperature, high-pressure water and steam.

UL 844: Meets requirements from Underwriters Laboratories (UL) LLC for use in hazardous (classified) locations

UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical Code, NFPA 70:

These requirements cover luminaires for use only under the following atmospheric conditions: